Mamiya 645 AFD Manual de Usario

Mamiya Cámara 645 AFD

Lee a continuación 📖 el manual en español para Mamiya 645 AFD (6 páginas) en la categoría Cámara. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

Mamiya 645 AFD Instruction Manual Companion for

D i g i t a l P h o t o g r a p h y

Mamiya 645 AFD Instruction Manual Companion for

D i g i t a l P h o t o g r a p h y

Congratulations on your purchase of the Mamiya 645AFD. To make the transition from film to digital

easier, we are including this digital companion that explains all of the new indicators you will see on the

LCDs of your Mamiya 645AFD. Please read the owner’s manual before reading this companion. Because

the Mamiya 645AFD was made to communicate with digital camera backs, these indicators will inform you

of the status of the communications between your Mamiya 645AFD and digital camera back. If you do not

have a digital back, these indicators will not appear and you do not have to read any further.

There are three basic modes that your Mamiya 645 AFD goes through when taking a digital image. First is

the Normal or pre-capture mode. The camera is in this mode before the shutter is released. While in this

mode the camera virtually acts as if there were a film magazine attached. Shutter speeds and apertures are

displayed on the internal and external LCD displays.

The second mode is after the shutter release button has been pressed. This is the Capture mode. At this

time the Mamiya 645 AFD will start to act very differently when a digital back is attached. There is a whole

new set of indicators that will be displayed on the LCD displays of the camera.

The After Capture mode is the third and final mode. Again, in this mode there are new indicators that will

appear on the camera’s LCD displays. The following will describe these displays and what they signify.

Please note:

All of the following displays are possible. They will be displayed on the Mamiya 645 AFD’s internal and

external LCDs. Some digital backs will not display some or any of the following information. This will

depend on the digital back manufacturer’s design.

Condition #1

This display will appear before the shutter has been released (Normal

mode). At this point the Mamiya 645AFD will act as if there is a film

magazine attached and will display shutter speed and aperture respec-

tively. This indication will not appear under conditions 4b, 5 and 6.

Condition #2

This will appear under normal shooting conditions after the shutter has

been released (Capture mode). CaP db tells us the digital back is in the

process of capturing an image. It will be displayed until the digital

capture is complete except under conditions 4b, 5 and 6.

Condition #3

After the CaP db display these indicators may appear (After Capture

mode). Db-E indicates a digital back exposure warning. The +1.3

confirms the meter reading is +1.3 stops higher than the set exposure

on the camera. It will appear in the Manual and X exposure modes. If

the exposure setting set on the camera does not agree with the expo-

sure determined by the meter, this will be displayed showing the

difference between the two. When this appears, it will blink for three

seconds. It can be cancelled by pressing any button.

Internal LCD External LCD

Especificaciones del producto

Marca:	Mamiya
Categoría:	Cámara
Modelo:	645 AFD
Color del producto:	Zilver
Ancho:	105 mm
Profundidad:	105 mm
Altura:	175 mm
Amable:	Pot
factor vorm:	Rond
Material:	Roestvrijstaal
Cantidad por paquete:	1 stuk(s)
No contiene:	Bisfenol A / BPA
Fácil de usar:	Ja
Contenido:	0.35 l
Clausura:	Draaien