Marmitek IP RoboCam 8 Manual de Usario

Lee a continuación 📖 el manual en español para Marmitek IP RoboCam 8 (40 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/40
IP ROBOCAM 8TM WIRED
20116/20061025 © ALL RIGHTS RESERVED MARMITEK ® 2006
P ROBOCAM8
WIRED
IP ROBOCAM 8TM
WIRED
QUICK INSTALLATION 3
KURZ INSTALLATIONSANLEITUNG 9
GUIDE D’INSTALLATION RAPIDE 15
GUIA DE INSTALACNE RÁPIDA 21
GUIDA RAPIDA PER INSTALLAZIONE 27
KORTE INSTALLATIEGIDS 33
2 ® MARMITEK
SAFETY WARNINGS
To prevent short circuits, this product should only be used inside and only in dry spaces. Do not expose the
components to rain or moisture. Do not use the product close to a bath, swimming pool etc.
Do not expose the components of your systems to extremely high temperatures or bright light sources.
Do not open the product: the device contains live parts. The product should only be repaired or serviced by a
qualified repairman.
In case of improper usage or if you have opened, altered and repaired the product yourself, all guarantees
expire. Marmitek does not accept responsibility in the case of improper usage of the product or when the
product is used for purposes other than specified. Marmitek does not accept responsibility for additional
damage other than covered by the legal product responsibility.
Adapters: Only connect the adapter to the mains after checking whether the mains voltage is the same as the
values on the identification tags. Never connect an adapter or power cord when it is damaged. In that case,
contact your supplier.
MINIMUM SYSTEM REQUIREMENTS
Hardware: CD ROM drive
Operating system: MS Windows 98SE, ME,NT, NT4.0, 2000, XP.
LAN port: 10 Base-T Ethernet or 100 Base-TX Fast Ethernet
For camera setup and Web Browser Users:
Processor: Pentium 2 or above
Memory: 64 MB RAM, 5MB free disk space
Web browser: Supporting ActiveX or Java
For installation and IP View Pro Application Users:
Processor: Pentium 3 or above
Memory: 128 MB RAM, 500 / 1000MB free disk space .
Web browser: Supporting ActiveX or Java
PACKAGE CONTENTS
One Pan/Tilt Internet Camera
One AC Power Adapter
One RJ-45 Ethernet Cable
One Metal Clip
This Quick Installation Guide
One Installation CD-ROM
Note: If any item contained is damaged or missing, please contact your local dealer immediately.
This is the quick installation guide describing how to connect the IP Robocam. For an extensive description of all
the possibilities of the camera, consult the user manual, which can be found on the CD ROM provided.
HARDWARE INSTALLATION: ATTACHING THE METAL CLIP
To attach the metal clip, remove the two rubber pads under
the base of the camera firstly. Place the metal clip
onto the camera base, and align the two holes of metal clip with
two screw holes on the base. Secure the
metal clip to the base with two screws (provided). Then, you can:
install the camera to the ceiling using two
ceiling screws (1); or, install the camera to the wall using
two wall screws (2).
CONNECTING THE ETHERNET CABLE
Connect an Ethernet cable to the network cable connector
located on the cameras rear panel, and then attach it to
the network.
3IP ROBOCAM8TM WIRED
ENGLISH

Especificaciones del producto

Marca: Marmitek
Categoría: Cámara de vigilancia
Modelo: IP RoboCam 8

¿Necesitas ayuda?

Si necesitas ayuda con Marmitek IP RoboCam 8 haz una pregunta a continuación y otros usuarios te responderán




Cámara de vigilancia Marmitek Manuales

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales