Marmitek PH7208 Manual de Usario

Marmitek sistema de control de acceso PH7208

Lee a continuación 📖 el manual en español para Marmitek PH7208 (28 páginas) en la categoría sistema de control de acceso. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/28

SIREN

20171 / 20070126 • PH7208TM INDOOR SIREN

USER MANUAL 3

GEBRAUCHSANLEITUNG 7

GUIDE UTILISATEUR 11

MODO DE EMPLEO 15

MANUALE D’ISTRUZIONI 19

GEBRUIKSAANWIJZING 23

PH7208™

X-10 INDOOR SIREN

2 © MARMITEK

PH7208™ X-10 INDOOR SIREN

SAFETY WARNINGS

• To prevent short circuits, this product should only be used inside and only in dry

spaces. Do not expose the components to rain or moisture. Do not use the product

close to a bath, swimming pool etc.

• Do not expose the components of your systems to extremely high temperatures or

bright light sources.

• Do not open the product: the device contains live parts. The product should only be

repaired or serviced by a qualified repairman.

• In case of improper usage or if you have opened, altered and repaired the product

yourself, all guarantees expire. Marmitek does not accept responsibility in the case

of improper usage of the product or when the product is used for purposes other

than specified. Marmitek does not accept responsibility for additional damage other

than covered by the legal product responsibility.

• This product is not a toy. Keep out of reach of children.

•

The sirens operate on 230V. When the housing is opened some components carry a very

high voltage! Only fit the sirens when the plug has been removed from the wall socket.

• The siren produces an extremely loud noise (110dB(A)). In order to prevent damage

to hearing never stand close to an operating siren!

INTRODUCTION

Congratulations on your purchase of the Marmitek X-10 wireless indoor siren PH7208.

This siren operates in response to X-10 commands. These commands are transmitted

onto the mains by Marmitek alarm systems or by a Marmitek SM10 interface. By using

a universal X-10 transmitter (Model SM10) this additional siren can therefore also be

connected to a security system other than a Marmitek X-10 system.

INSTALLATION

One or more additional sirens can be connected to a security system. In order to activate

them the so-called Unit and House Code on the alarm console or interface must be set to

the same address as the address on the siren. The standard factory setting is A-1. The

address can be set using the code dials. The PH7208 can be connected to any wall socket.

The Marmitek sirens operate without additional wiring. To do so a technology is used

whereby the command to activate the siren is transmitted through the mains. The con-

dition for this is that the sirens are connected to the same phase as the alarm system (or

another group within the same phase where appropriate). If this is not possible then

phase connection filters or repeaters should be used (e.g. FD10, CAT3000).

3PH7208™

ENGLISH

Especificaciones del producto

Marca:	Marmitek
Categoría:	sistema de control de acceso
Modelo:	PH7208

¿Necesitas ayuda?

Si necesitas ayuda con Marmitek PH7208 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

sistema de control de acceso Marmitek Manuales

Marmitek PH7208 Manual de Usario

27 Julio 2024

Marmitek SC9000 Manual de Usario

19 Julio 2024

sistema de control de acceso Manuales

Últimos sistema de control de acceso Manuales

Hikvision DS-PK-L Manual de Usario

16 Octubre 2024

Dahua Technology ASI1212A(V2) Manual de Usario

8 Octubre 2024

Hikvision DS-PKA-WLM-433 Manual de Usario

6 Octubre 2024

Panduit ACF05 Manual de Usario

3 Octubre 2024

Viking K-1200 Manual de Usario

1 Octubre 2024

Viking K-1275-IP-EWP Manual de Usario

1 Octubre 2024

Viking K-1770-IP Manual de Usario

1 Octubre 2024

Viking K-1270-EWP Manual de Usario

1 Octubre 2024

Viking K-1770-3-EWP Manual de Usario

1 Octubre 2024

Viking K-1200-IP Manual de Usario

1 Octubre 2024