Marshall DSL20CR Manual de Usario

Lee a continuación 📖 el manual en español para Marshall DSL20CR (7 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
DSL20CR &
DSL20HR
OWNER’S MANUAL
INTRODUCTION
COMPLIANCE STATEMENT
WARNING:
Before going any further, make sure that
your amplier is compatible with your
mains electricity supply. If you have any
doubt, please seek help from a qualied
technician – your Marshall dealer can
help you in this respect.
MAINS INPUT & FUSE:
The specic mains input voltage
rating that your amplier has been
manufactured for is indicated on the
rear panel of the amplier. Your amplier
is provided with a detachable mains
(power) lead, which should be connected
to the MAINS INPUT socket on the rear
panel of the amplier (Rear Panel Function
#16). The correct value and type of
mains fuse is specied on the rear panel
of the amplier.
NEVER attempt to bypass the fuse or t
one of the incorrect value or type.
TRANSPORTING YOUR EQUIPMENT:
Please ensure that your amplier is
switched off, unplugged from the mains
electricity supply and all removable
cables have been disconnected from
your equipment before attempting to
move it.
IMPORTANT SET UP INFORMATION:
1. When using the DSL20HR, or the
DSL20CR with an extension speaker
cabinet(s), make sure that the
speaker cabinet(s) is connected to
the correct impedance loudspeaker
jack socket(s) on the rear panel of the
amplier. See the LOUDSPEAKERS
guide in this manual for specic
information regarding impedance
matching (Rear Panel Function #22).
WARNING:
Failure to do the above may damage
your amplier. When connecting a
speaker cabinet make sure that you
use a proper speaker cable. Never use a
screened (shielded) guitar cable for this
purpose.
2. Ensure that the POWER switch is
set to the OFF position (Front Panel
Function #15).
3. Ensure the OUTPUT switch is in the
STANDBY position
(Front Panel Function #14).
4. Connect the supplied mains (power)
lead into the MAINS INPUT (Rear
Panel Function #16) rst and then
into an electricity outlet.
5. Ensure that the volume controls on
the front panel are set to zero (Front
Panel Functions #3 & #6).
6. Plug your guitar into the INPUT jack
socket (Front Panel Function #1).
7. Switch the amplier ON using the
POWER switch, wait for a few
minutes and then switch the
OUTPUT switch to either the LOW
or HIGH position.
8. Turn the front panel POWER switch
on and wait for a few minutes
before going to point 9.
9. Turn the selected channel volume
up to your preferred level and your
amplier is ready to play.
WARNING! IMPORTANT SAFETY INSTRUCTIONS
ENGLISH

Especificaciones del producto

Marca: Marshall
Categoría: No categorizado
Modelo: DSL20CR

¿Necesitas ayuda?

Si necesitas ayuda con Marshall DSL20CR haz una pregunta a continuación y otros usuarios te responderán




No categorizado Marshall Manuales

No categorizado Manuales

Últimos No categorizado Manuales