Matrix T50x-U Manual de Usario

Lee a continuación 📖 el manual en español para Matrix T50x-U (11 páginas) en la categoría bicicleta estática. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/11
T50x / T50x-U
TREADMILLS
OWNER’S MANUAL
1
CHAPTER 1: IMPORTANT SAFETY INSTRUCTIONS PAGES
1.1 Before Getting Started ....................................................................................................
1.2 Proper Usage .................................................................................................................
1.3 Read and Save These Instructions ...................................................................................
1.4 Electrical Requirements ..................................................................................................
1.5 Grounding Instructions ...................................................................................................
CHAPTER 2: PREvENTATIvE MAINTENANCE
2.1 Recommended Cleaning Tips ..........................................................................................
2.2 Deck and Belt Replacement ...........................................................................................
2.3 Check for Damaged Parts ...............................................................................................
2.4 Adjusting the Belt ..........................................................................................................
CHAPTER 3: SERIAL NUMBER LOCATION
3.1 T50x, T50x-U Treadmill ..........................................................................................................
CHAPTER 4: OvERLAY AND WORKOUT DESCRIPTION
4.1 T50x Console Description .........................................................................................................
4.2 T50x-U Console Description .....................................................................................................
4.3 Manual Workout Operation........................................................................................................
4.4 Operating Level Based Programs ...............................................................................................
4.5 Heart Rate Control Workout Operation .......................................................................................
4.6 Fitness Test Workout Operation .................................................................................................
CHAPTER 5: T50x, T50x-U TREADMILL SPECIFICATIONS, PARTS & ASSEMBLY GUIDES
5.1 Model Specifications .................................................................................................................
5.2 Fasteners and Assembly Tools ....................................................................................................
5.3 Assembly Steps .......................................................................................................................
02
02
02
03
03
03
03
03
04
04
05
06
07
07
08
08
10
11
12
TABLE OF CONTENTS
2 3
CHAPTER 1: Important Safety Instructions
1.1 BEFORE GETTING STARTED
It is the sole responsibility of the purchaser of Matrix Fitness Systems
products to instruct all individuals, whether they are the end user or
supervising personnel, on proper usage of the equipment.
It is recommended that all users of Matrix Fitness Systems exercise
equipment be informed of the following information prior to its use.
1.2 PROPER USAGE
Do not use the equipment in any way other than designed or intended by
the manufacturer. It is imperative that all Matrix Fitness Systems
equipment is used properly to avoid injury.
Keep hands and feet clear of moving parts at all times to avoid injury.
Unsupervised children must be kept away from this equipment.
Do not wear loose clothing while on equipment.
1.3 READ AND SAvE THESE INSTRUCTIONS
This Treadmill is intended for commercial use. To ensure your safety and
protect the equipment, read all instructions before operating the
MATRIX treadmill.
Please leave a 78.75” (2000 mm) x 39.50” (1000 mm) landing zone
behind the treadmill. This zone is to allow easy access to the treadmill and
gives the user an easy exit path from the machine. In case of an emergency,
place both hands on the side arm rests to hold yourself up and place your
feet onto the side rails.
When using an electrical product, basic precautions should always be
followed including the following:
DANGER: To reduce the risk of electric shock: Always unplug this
equipment from the electrical outlet immediately after using and
before cleaning.
WARNING: To reduce the risk of burns, fire, electrical shock or injury
to persons that may be associated with using this product:
An appliance should never be left unattended when plugged in. Unplug from
outlet when not in use and before putting on or taking off parts.
This product must be used for its intended purpose described in this
owner’s manual. Do not use other attachments that are not recommend by
the manufacturer. Attachments may cause injury.
To prevent electrical shock, never drop or insert any object into any opening.
Do not remove the console covers. Service should only be done by an
authorized service technician.
Never operate the treadmill with the air opening blocked. Keep the air
opening clean, free of lint and hair.
Never operate product if it has a damaged cord or plug, if it is working
improperly, if it has been damaged, or immersed in water. Return the unit
to a service center for examination and repair.
Do not carry this unit by it’s supply cord or use the cord as a handle.
Keep any power cord away from heated surfaces.
Close supervision is necessary when treadmill is used by or near children or
disable persons.
Do not use outdoors.
The treadmill shall be installed on a stable base.
Do not operate where aerosol (spray) products are being used or when
oxygen is being administered.
To disconnect, turn all controls to the off position, then remove the plug
from outlet.
Connect this treadmill to a properly grounded outlet only.
This appliance is not intended for use by persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge unless
they have been given supervision or instruction concerning use of the appli-
ance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
If the supply cord is damaged, it must be replaced by a special cord or
assembly available from the manufacturer or its service agent.
WARNING: Heart rate monitoring systems may be inaccurate. Over
exercise may result in serious injury or death. If you feel faint stop exercising
immediately.
SAvE THESE INSTRUCTIONS
3
1000 mm
2000 mm
1000 mm
305 mm
CHAPTER 1: Important Safety Instructions
1.4 ELECTRICAL REqUIREMENTS
For your safety and to ensure good treadmills performance, the ground on
this circuit must be no-looped. Before connecting the plug into an electri-
cal outlet, make sure that the voltage requirements match that the voltage
of the treadmill.
ATTENTION: Your treadmill is provided with a power cord. Please
only use with the power cord as supplied, or with Matrix spare part, other-
wise this may result in damage.
120v UNITS
The Matrix T50X, T50X-U 120 treadmill is for use on a nominal 120-volt
circuit and has a non-looped grounding plug. Make sure that the 120-volt
treadmill is connected to an outlet, NEMA 5-20R, having the same configu-
ration as the plug. No adapter should be used with this product.
220v UNITS
The Matrix T50X, T50X-U 220 treadmill is for use on a nominal 220-volt
circuit and has a non-looped grounding plug. Make sure that the 220-volt
treadmill is connected to an outlet, NEMA 6-20R, having the same
configuration as the plug. No adapter should be used with this product.
1.5 GROUNDING INSTRUCTIONS
The treadmill must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. The treadmill is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances. If the user does not follow
these grounding Instructions, the user could void the Matrix
limited warranty.
DANGER: Improper connection of the equipment-grounding conduc-
tor can result in the risk of electric shock. Check with a qualified electrician
or serviceman if the user is in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product if it will not fit
the outlet; have a proper outlet installed by a qualified technician.
2.1 RECOMMENDED CLEANING TIPS
1. Use a soft, clean cotton cloth. DO NOT use paper towels to clean
surfaces on the treadmill. Paper towels are abrasive and can
damage surfaces.
2. Use a mild soap and damp cloth. DO NOT use ammonia based cleaner.
This will cause discoloring of the aluminum and plastics it comes into
contact with.
3. Do not pour water or cleaning solutions on any surface. This could
cause electrocution.
4. Wipe the console and side rails after every use.
5. Brush away any wax deposits from the deck and belt area. This is a
common occurrence until the wax is worked into the belt material.
6. Be sure to remove any obstructions from the path of the elevation
wheels including power cords.
7. Monthly, unplug the treadmill and remove the motor cover. Check for
debris and clean with a dry cloth or small vacuum nozzle.
WARNING: Do not plug the treadmill in until the motor cover has
been reinstalled.
CAUTION: Be sure to have proper assistance to install and move the
unit in order to avoid injury or damage to the treadmill.
2.2 DECK AND BELT REPLACEMENT
One of the most common wear and tear items on a treadmill is the deck and
belt combination. If these two items are not properly maintained they can
cause damage to other components. This product has been provided with
the most advanced maintenance free lubricating system on the market. The
Matrix Ultimate Deck™ does not require any maintenance, other than
cleaning and belt tightening, for up to 25,000 miles.
WARNING: Do not run the treadmill while cleaning the belt and
deck. This can cause serious injury and can damage the machine.
Maintain the belt and deck by wiping the sides of the belt and deck with a
clean cloth. The user can also wipe under the belt 2 inches on both sides
removing any dust or debris.
The deck can be flipped and reinstalled or replaced by an authorized service
technician. Please contact Matrix Fitness Systems for more information.
2.3 CHECK FOR DAMAGED PARTS
DO NOT use any equipment that is damaged or has worn or broken parts.
Use only replacement parts supplied by Matrix Fitness Systems.
MAINTAIN LABELS AND NAMEPLATES. Do not remove labels for any
reason. They contain important information. If unreadable or missing,
contact Matrix Fitness Systems for a replacement or an authorized
service provider.
MAINTAIN ALL EqUIPMENT Preventative maintenance is the key to
smooth operating equipment, as well as keeping the users liability to a
minimum. Equipment needs to be inspected at regular intervals. Defective
components must be replaced immediately. Improperly working equipment
must be kept out of use until it is repaired. Ensure that any person(s)
making adjustments or performing maintenance or repair of any kind is
qualified to do so. Matrix Fitness Systems will provide service and
maintenance training at our corporate facility upon request or in the field if
proper arrangements are made.
CHAPTER 2: Preventative maintenance

Especificaciones del producto

Marca: Matrix
Categoría: bicicleta estática
Modelo: T50x-U

¿Necesitas ayuda?

Si necesitas ayuda con Matrix T50x-U haz una pregunta a continuación y otros usuarios te responderán




bicicleta estática Matrix Manuales

bicicleta estática Manuales

Últimos bicicleta estática Manuales