Maxsa 40242 Manual de Usario

Lee a continuación 📖 el manual en español para Maxsa 40242 (3 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
1. To access the battery compartment, twist open the back half
of the light counterclockwise.
2. Remove the battery compartment cover by squeezing the
two tabs on the cover inward. 5. Reassemble the Motion-Activated Anywhere Light by twisting
the back half of the light clockwise tightly to ensure a weather
proof seal.
4.
3.Totally portable and weatherproof.
Perfect outdoors for doors, steps, decks, sheds, garages,
pathways, porches, and anywhere additional light is needed.
Also perfect indoors for hallways, stairways,closets, and
bathrooms.
Built-in motion sensor automatically turns on the light when
movement is detected in the area. The light remains on while
motion continues to be detected in the area.
Built-in photosensor enables the light to only turn on at night.
The 4 super bright LEDs have an estimated life of 30,000 hours,
so they never need changing.
D
40240, 40241
ANYWHERE LIGHT
motion-activated
ABOUT YOUR MOTION-ACTIVATED ANYWHERE LIGHT
Anywhere
Requires 4 D cell batteries (not included). The batteries typically
last up to 1 year under normal use.
TM
TM
TM
TM
1. In order to mount the light securely to a wall or other stable
surfaces, the mounting base needs to be installed. Slide the
the mounting place to separate it from the main body.
2. If you are installing the mounting place on a very hard
surface, you may need to drill holes for the screws first.
The included screw anchors can be used for drywall,
cement, brick, or similar surfaces.
3. Use the two screws supplied to install the mounting plate.
1. Align the base to the mounting plate. Slide the main body
onto the mounting plate until it snaps into place.
At night, the LED lights will remain on for approximately 40
seconds after the last detected movement. If a movement is
detected while the lights are on, the light duration will be reset
and remain on for another 40 seconds.
Depending on your preferences, you can rotate the base on
the mounting plate or make the motion sensor and the light
swivel to aim at different directions.
because
25 feet
fresh
Anywhere
Anywhere
Anywhere
Anywhere
Anywhere
Anywhere
TM
TM
TM
TM
TM
TM
3
3
approx. 40 seconds
v10.1
2010
info@maxsainnovations.com

Especificaciones del producto

Marca: Maxsa
Categoría: No categorizado
Modelo: 40242

¿Necesitas ayuda?

Si necesitas ayuda con Maxsa 40242 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Maxsa Manuales

Maxsa

Maxsa 44640 Manual de Usario

19 Septiembre 2024
Maxsa

Maxsa 44449-L Manual de Usario

19 Septiembre 2024
Maxsa

Maxsa 43319-X Manual de Usario

19 Septiembre 2024
Maxsa

Maxsa 44641 Manual de Usario

19 Septiembre 2024
Maxsa

Maxsa 40241 Manual de Usario

19 Septiembre 2024
Maxsa

Maxsa 40242 Manual de Usario

19 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales