Meaco 1056P Manual de Usario

Meaco Ventilador 1056P

Lee a continuación 📖 el manual en español para Meaco 1056P (12 páginas) en la categoría Ventilador. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/12
MeacoFan 1056P Air Circulator
Instruction Manual
MeacoFan 1056P Air Circulator
Please read this instruction manual before using the air circulator and keep safe for
future reference.
Thank you for choosing Meaco, we really appreciate it.
2
SAFETY INFORMATION
---------------------------------------------------------------------------------------------------------------------------------------
This air circulator must not be used in rooms under the following conditions:
- Potentially explosive atmosphere
- gressive atmospheres Ag
- Featuring a high concentration of solvents
- An extremely high ratio of dust
- Commercial environments
Magnets: The air circulator and the remote control both contain magnets. Please note the following:
Pacemakers and defibrillators may be affected by magnets. If this affects you then please do not put
the remote control in a pocket and warn anyone who is likely to use the air circulator or the remote that
it has a magnet. Credit cards and data cards can also be affected by magnets and should not be placed
near to the air circulator or the fan.
Keep Children Away: Do not allow children to play with or around this unit, which could result in injury.
Be sure the unit is inaccessible to children when not attended. This appliance is not intended for use by
person (including children) with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
Keep Unit Grounded: Always operate the unit with a grounding plug and a grounded electrical outlet.
A grounding plug is an essential safety feature that helps reduce the risk of shock or fire.
Protect Power Cord from Damage: Never operate a unit with a damaged power cord, as this may
lead to electrical or fire hazards. If the power supply cord is damaged, it must be replaced by a cord of
the same type and amperage rating.
Extension Cords: Extension cords must be grounded and able to deliver the appropriate voltages to
the unit.
Handle with Care: Do not drop, throw or crash the air circulator. Rough treatment can damage the
components or wiring and create a hazardous condition.
Run on Stable Surface: Always operate the unit on a stable, level surface, for example the floor or a
strong counter, so that the air circulator cannot fall and cause injury.
Keep Out of Water: Never operate the unit in pooled or standing water, as this may create a risk of
injury from electrical shock. Do not store or operate outdoors. If electrical wiring or components become
wet, thoroughly dry them before using the unit. If in doubt do not use the air circulator and consult a
qualified electrician or a Meaco approved engineer.
Keep Air Intakes Clear: Do not clog or block the air intakes by placing the air circulator too close to
curtains, walls or anything that will restrict the air inlet. This may cause the unit to overheat and result
in a fire or electrical hazard.
Keep Electrical Components Dry: Never allow water inside the air circulator’s electrical components.
If these areas become wet for any reason, thoroughly dry them before using the air circulator. If in
doubt, do not use the air circulator and consult a qualified electrician or a Meaco approved engineer.
The operator must make the operating instruction available for the user and make sure that the user
does understand the manual.
3
WIRING INSTRUCTIONS
---------------------------------------------------------------------------------------------------------------------------------------
Should it be necessary to change the plug, please note the wires in the mains lead are
coloured in accordance with the following code:
BLUE NEUTRAL –
BROWN LIVE –
GREEN AND YELLOW EARTH –
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
1. The BLUE wire is the NEUTRAL and must be connected to the terminal which is marked with
the letter N or coloured .BLACK
2. The wire is the LIVE and must be connected to the terminal which is marked with BROWN
the letter L or coloured RED.
3. The GREEN/YELLOW is the EARTH and must be connected to the terminal which is marked
with the letter E or coloured GREEN GREEN or /YELLOW.
4. Always ensure that the cord grip is positioned and fastened correctly.
5. Only ever use the same fuse as fitted in the original product, if in doubt please contact Meaco
first, or a qualified electrician.
Example wiring for a Standard British Plug:
Please note: The Earth Terminal is marked with the letter E or Earth Symbol .

Especificaciones del producto

Marca: Meaco
Categoría: Ventilador
Modelo: 1056P

¿Necesitas ayuda?

Si necesitas ayuda con Meaco 1056P haz una pregunta a continuación y otros usuarios te responderán


Ventilador Meaco Manuales

Meaco

Meaco Fan 650 Manual de Usario

13 Septiembre 2024
Meaco

Meaco 1056P Manual de Usario

15 Agosto 2024

Ventilador Manuales

Últimos Ventilador Manuales

Hunter

Hunter Bayport Manual de Usario

27 Octubre 2024
CasaFan

CasaFan Eco Plano II Manual de Usario

27 Octubre 2024
Hunter

Hunter Cabo Manual de Usario

27 Octubre 2024
Eldom

Eldom Columbiavac CP60 Manual de Usario

26 Octubre 2024
V-Tac

V-Tac VT-6055-3 Manual de Usario

26 Octubre 2024
V-Tac

V-Tac VT-6053-5 Manual de Usario

26 Octubre 2024
Thermex

Thermex TD-Silent Manual de Usario

25 Octubre 2024
Ufesa

Ufesa Toronto FF0450 Manual de Usario

25 Octubre 2024
Cecotec

Cecotec EnergySilence 300 Max Skyline Smart Manual de Usario

25 Octubre 2024
Westinghouse

Westinghouse 72250 Manual de Usario

25 Octubre 2024