Metra 95-6541 Manual de Usario

Lee a continuación 📖 el manual en español para Metra 95-6541 (4 páginas) en la categoría equipo de coche. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
REV. 3/3/2017 INST95-6541
INSTALLATION INSTRUCTIONS FOR PART 95-6541
METRA – The World’s best kits.®metraonline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
ISO DDIN radio provision
Painted black to match the factory dash panel
A) Radio/climate control panel B) Trim panel C) Radio brackets • D) (2) #6 x 3/8 Phillips scews
20;-,(;<9,:
20;*64765,5;:
Panel removal tool Phillips screwdriver
Cutting tool • 10mm socket wrench
;663:9,8<09,+
Jeep Wrangler 2003-2006
95-6541
Table of Contents
A B C D
Dash Disassembly ................................................. 2
Kit Preparation ....................................................2-3
Kit Assembly .......................................................... 3
>0905.(5;,55(*655,*;065:(sold separately)
Wiring Harness: 70-6502 Antenna Adapter: • 40-CR10
95-6541
2
Dash Disassembly
1. Unsnap and remove defroster grille
at the top of the dash, and then
remove the (2) Phillips screws
exposed. (Figure A)
2. Unsnap and remove the radio/
climate control panel. (Figure A)
3. Remove the glove box door to
access and remove the (1) 10mm
nut securing the back of radio.
4. Remove the (4) Phillips screws
securing the radio, and then
unplug and remove.
Continue to Kit Preparation
(Figure A)
1. Remove the (4) Phillips screws
securing the climate control panel,
and then temporarily move it out of
the way in preparation for the
next step.
2. Cut and remove the sub-dash to
allow clearance for the aftermarket
radio. (Figure A)
3. Secure the climate control panel
back to the vehicle using the
factory screws.
From the factory radio/climate
control panel:
1. Unclip and remove the A/C vents.
(Figure B)
2. Remove the (4) panel clips.
Continued on the next page
(Figure A)
(Figure B)
Remove
shaded area
Kit Preparation
95-6541
Kit Preparation Kit Assembly(cont.)
3
(Figure D)
(Figure C)
To the 95-6541 radio/climate
control panel:
1. Clip in the factory A/C vents.
(Figure C)
2. Attach the (4) factory panel clips.
3. Secure the trim panel to the
radio
climate/control panel
using the (2)
#6 x 3/8” Phillips screws provided.
(Figure D)
Continue to Kit Assembly (Figure A)
ISO DDIN radio provision
1. Attach the radio brackets to the
radio using the screws supplied with
the radio. (Figure A)
2. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra. Test the
radio for proper operation.
3. Secure the completed assembly into
the dash using the factory screws.
4. Reassemble the dash in reverse
order of disassembly using the
95-6541 radio climate/control panel.

Especificaciones del producto

Marca: Metra
Categoría: equipo de coche
Modelo: 95-6541

¿Necesitas ayuda?

Si necesitas ayuda con Metra 95-6541 haz una pregunta a continuación y otros usuarios te responderán




equipo de coche Metra Manuales

equipo de coche Manuales

Últimos equipo de coche Manuales