Metra 95-8214TG Manual de Usario

Metra equipo de coche 95-8214TG

Lee a continuación 📖 el manual en español para Metra 95-8214TG (16 páginas) en la categoría equipo de coche. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/16

METRA. THE WORLD’S BEST KITS.™

APPLICATIONS

1-800-221-0932 metraonline.com

INSTALLATION INSTRUCTIONS FOR PART 95-8214

REV. 4/10/12

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness:

• 70-1761 - Non-amplified Toyota harness

• TYTO-01 - Amplified Toyota interface

Antenna Adapter:

• Not required

• Panel removal tool • Phillips screwdriver • Socket wrench

TOOLS REQUIRED

• A) Radio housing trim panel • B) DDIN Radio housing • C) DDIN Radio housing brackets • D) (4) Panel clips

• E) (4) #6 x 3/8” Phillips truss-head screws • F) Clock/Hazard switch bracket

KIT FEATURES

KIT COMPONENTS

• Double DIN head unit provision

• Painted and textured to match factory dash

• Both kits are factory “golf ball” style textured

• Available in two colors:

95-8214TB = Black, 95-8214TG = Gray

CA B D

Table of Contents

Dash Disassembly

–Toyota Tacoma 2005-2011 3-4..........................................................................................

Kit Assembly

– Kit preparation .................................................................................................................5

– ........................................................................................Double DIN head unit provision 6

95-8214

K PNOWLEDGE IS OWER

Enhance your installation and fabrication skills by

enrolling in the most cognized and spected re re

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for mo information and take steps re

toward a better tomorrow.

Metra recommends MECP

certiﬁed technicians

CAUTION: Metra recommends disconnecting the negative battery terminal before beginning

any installation. All accessories, switches, and especially air bag indicator lights must be

plugged in before reconnecting the battery or cycling the ignition.

*Nota: Refer also to the instructions included with the aftermarket radio.

1. Unclip and remove A/C control panel.

(Figura A)

2. Remove (4) 10 mm bolts securing radio.

(Figura B)

3. Unclip and remove entire panel

including hazard switch and clock.

(Figura C)

Continued on next page

Toyota Tacoma 2005-2011

Dash Disassembly 95-8214

SCAN

T EXT

PWR VOL