Metra 95-8732B Manual de Usario

Lee a continuación 📖 el manual en español para Metra 95-8732B (5 páginas) en la categoría equipo de coche. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/27/20 INST95-8732B
I N S TA L L AT I O N I N S T R U C T I O N S
95-8732B
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
ISO DDIN radio provision
Painted scratch-resistant matte black
KIT COMPONENTS
• A) Radio bezel • B) Radio brackets • C) Phillips screws (4)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench • T-25 Torx driver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wire harness: AX-MC90132 (2009 model only)
Antenna adapter: 40-EU10 (03-08)
• 40-EU56 (2009)
A B C
Mercedes (W211) E Class 2003-2009
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and pull upwards on the gear
shifter boot just enough to allow the
gear shifter panel to be removed in the
following step. (Figure A)
2. Unclip the gear shifter panel from the
front, then slide forward to release
the hooks from the rear of the panel.
Unplug, and remove the panel.
(Figure B)
3. Open the ashtray, then unclip, unplug,
and remove the entire assembly.
(Figure C)
4. Remove (2) screws securing the hazard
& switch panel, then unclip, unplug, and
remove. (Figure D)
5. Unscrew clockwise, (2) screws
underneath the radio, just enough to
release it from the dash. Pull rearward
on the radio every couple of full turns
until the radio comes loose. Slide the
radio out, then unplug and remove.
(Figure E)
Continue to Kit Assembly
(Figure A)
(Figure B)
(Figure C)
(Figure E)
(Figure D)
REV. 1/27/2020 INST95-8732B 3
1. Secure the radio brackets to the radio
bezel using (4) Phillips screws provided.
(Figure A)
2. Slide the radio into the bracket/bezel
assembly, then secure using screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
4. Slide the radio assembly into the dash.
Secure by turning the radio screws just
enough to secure the radio in place. Do
not overtighten. (Figure C)
5. Reassemble the dash in reverse
order of disassembly to complete the
installation.
KIT ASSEMBLY
(Figure A) (Figure C)(Figure B)

Especificaciones del producto

Marca: Metra
Categoría: equipo de coche
Modelo: 95-8732B

¿Necesitas ayuda?

Si necesitas ayuda con Metra 95-8732B haz una pregunta a continuación y otros usuarios te responderán




equipo de coche Metra Manuales

equipo de coche Manuales

Últimos equipo de coche Manuales