Metra 95-8910S Manual de Usario

Metra equipo de coche 95-8910S

Lee a continuación 📖 el manual en español para Metra 95-8910S (4 páginas) en la categoría equipo de coche. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

I N S TA L L AT I O N I N S T R U C T I O N S

95-8910S

Attention! Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

KIT FEATURES

• ISO DDIN radio provision

• Painted silver to match the factory ﬁnish

• Includes a pocket to replace the factory radio controls

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws • E) (4) Panel clips

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Assembly ..........................................................3

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring Harness: 70-7553†

Antenna Adapter: 40-SB10-18

† Reference note in Kit Assembly

A B C D E

Subaru Legacy/Outback (with NAV) 2010-2012

Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com

speciﬁc applications

2386.257.1187

MetraOnline.com

1. Unclip and remove the a/c vent trim

panel surrounding the radio. (Figure A)

2. Remove (6) Phillips screws securing the

radio/display. Slide the radio/display

out, then unplug and remove the

radio/display.

Note: The antenna cable is connected

down lower by the ﬂoorboard.

3. Cut and remove the shaded area shown

in the sub-dash to make clearance for

the aftermarket radio. (Figure B)

Continue to Kit Assembly

DASH DISASSEMBLY

(Figure A) (Figure B)

REV. 10/21/2020 INST95-8910S 3

KIT ASSEMBLY

(Figure B)

(Figure C)(Figure A)

1. Secure the

radio brackets

to the radio

using the screws supplied with the

radio. (Figure A)

2. Secure the

pocket

to the bottom portion

of the

radio brackets

using the (4) #8 x

3/8” Phillips screws provided. (Figure B)

3. Locate the factory wiring harness and

antenna connector in the dash and

complete all necessary connections to

the radio. Metra recommends using

the proper mating adapter from Metra

and/or Axxess. Test the radio for proper

operation.

The ampliﬁer turn-on wire must Note:

be tapped into the factory radio harness.

Locate pin-23, a wire, in the 24-pin Pink

harness.

4. Secure the radio assembly to the dash

using the factory screws.

5. Attach the (4)

panel clips

provided onto

the

radio trim panel

, then clip the

radio

trim panel

onto the radio assembly.

(Figure C)

6. Reassemble the dash in reverse

order of disassembly to complete the

installation.

Especificaciones del producto

Marca:	Metra
Categoría:	equipo de coche
Modelo:	95-8910S
Color del producto:	Geborsteld staal
Pantalla incorporada:	Nee
Ancho:	165 mm
Profundidad:	66 mm
Altura:	140 mm
Peso del embalaje:	1600 g
Amable:	Intelligente toegangscontrolelezer
Material de la carcasa:	Roestvrijstaal
Código de seguridad internacional (IP):	IP66, IP67
Colocación:	Muur
Tecnología de conectividad:	Bedraad
Número de hablantes:	1
Certificación:	EWP\nIP66\nFCC Part 68\nFCC Part 15
Cámara integrada:	Ja
Fácil de instalar:	Ja
Número de teclas del teclado:	12
Temperatura de funcionamiento (TT):	-34 - 65 °C
Teclado integrado:	Ja
Tipo de autenticación:	Access chip/card, Password
Lector de código de acceso:	Ja
Acceso al lector de tarjetas/chip:	Ja