Metra 99-7344G Manual de Usario

Metra equipo de coche 99-7344G

Lee a continuación 📖 el manual en español para Metra 99-7344G (8 páginas) en la categoría equipo de coche. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

REV. 7/18/2014 INST99-7344

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 99-7344

• A) Radio housing trim panel • B) Double DIN radio housing brackets • C) Pocket • D) (4) Panel clips

• E) (4) Phillips truss head screws

KIT COMPONENTS

• ISO DIN radio provision with pocket

• Painted Gray or Charcoal to match factory finish

G = Gray, CH = Charcoal

KIT FEATURES

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7304 - Hyundai Kia harness 2010-up • HYBL-04 - HYU/KIA amp interface

Antenna Adapter: • Not required

• Panel removal tool • Phillips screwdriver

TOOLS REQUIRED

A B C

Dash Disassembly

– Kia Sportage 2011-up ...................................... 2

Kit Preparation

– Kia Sportage 2011-up ...................................... 3

Kit Assembly

– ISO DIN radio provision with pocket ................ 3

Table of Contents

D E

99-7344

1. Remove the screw in the

instrument panel to the right of

the “engine start” button then

unclip the top panel of the steering

column then unclip and remove the

instrument panel. (Figure A)

2. Remove the screw in the dash

panel above the glove box to the

right of the radio then unclip and

remove the dash panel. (Figure B)

3. Remove the two screws from the

from the radio panel, unclip and

remove. (Figure C)

Kia Sportage 2011-up

(Figure C)

(Figure B)

(Figure A)

4. Unscrew the 4 Phillips screws

securing the radio into the dash,

unplug and remove the radio.

(Figure D)

5. Remove the four screws securing

the display into the factory panel

and unclip the hazard button. Both

items will need to be installed into

the 99-7344 kit panel. (Figure E)

Continue to kit preparation (Figure D)

(Figure E)

Hazard

button

Display

screws

99-7344

Kit Preparation

(Figure B)

(Figure C)

ISO DIN radio provision with pocket

1. Locate the factory wiring harness in

the dash. Metra recommends using

the proper mating adapter from Metra

or AXXESS. Re-connect the negative

battery terminal and test the unit for

proper operation.

2. Mount the pocket to the double

DIN brackets using the (4) supplied

screws. (Figure A)

3. Mount the radio to the doble

DIN brackets/pocket assembly with

the supplied (4) screws. (Figure A)

4. Mount the radio/bracket assembly

into the dash. (Figure B)

5. Snap the radio trim plate over

the radio/bracket assembly and

reassemble dash in reverse order of

disassembly. (Figure C)

Kit Assembly

1. Install the hazard button and display previously removed from the factory

radio panel.

2. Attach the four included panel clips to the radio panel. (Figure A)

Continue to kit assembly

(Figure A) (Figure A)

White

plastic

clips

White

plastic

clips

Especificaciones del producto

Marca:	Metra
Categoría:	equipo de coche
Modelo:	99-7344G
Color del producto:	Zwart
Peso.:	700 g
Enfoque automático:	Ja
Diámetro:	84.8 mm
Distancia focal fija:	85 mm
Diafragma (FF):	1.8 - 16
Estabilizador de imagen:	Ja
Estructura de la lente (elementos/grupos):	9/13
Longitud:	91.3 mm
Scherpstellen:	Auto
Distancia de enfoque más cercana:	0.8 m
Número de apertura máxima:	16
Número mínimo de apertura:	1.8
Tamaño del filtro:	67 mm
Tipo de lente:	Telelens
Componente para:	SLR
Interfaz de montura de lente:	Nikon 1, Nikon AF-S, Nikon AI-S, Nikon D, Nikon F, Nikon-AE, Nikon-AF
Número de láminas de apertura:	9
Formato del sensor de imagen:	Full frame
Ampliación máxima:	7.2 x
Marcas de cámaras compatibles:	Nikon