Metra 99-7366B Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-7366B (8 páginas) en la categoría equipo de coche. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
METRA. The World’s best kits.metraonline.com © COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
REV. 9/21/2015 INST99-7366B
Installation instructions for part 99-7366B
CAUTION!
Metra recommends disconnecting the negative bat
-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con
-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
• ISO DIN radio provision with pocket
Painted scratch resistant black
A) Radio trim panelB) Radio brackets • C) (4) #8 x 3/8” Phillips screws D) Pocket
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7304, HYBL-04
Antenna Adapter: • Not required
• Panel removal tool • Phillips screwdriver • 10mm Socket wrench • Cutting tool
TOOLS REQUIRED
A B C D
Dash Disassembly ................................................. 2
Kit Preparation ....................................................... 2
Kit Assembly .......................................................... 3
Table of Contents
99-7366B
1.
Unclip and remove the factory radio
trim panel including the a/c vents.
(Figure A)
2. Remove (4) Phillips screws
securing the radio and then
remove. (Figure B)
Continue to kit preparation
1. Cut the marked area in the
dash cavity. (Figure A)
2. Remove (1) 10mm nut holding the
area previously cut in step 1 to
remove the cut-out area.
Continue to kit assembly
Dash Disassembly Kit Preparation
(Figure B)
(Figure A)
(Figure A)
99-7366B
Kit Assembly
(Figure A)
(Figure B)
ISO DIN radio provision with pocket
1. Attach the to the pocket radio
brackets using (4) #8 x 3/8”
Phillips screws supplied. (Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio into the pocket/
bracket assembly, and then
secure the radio using the screws
supplied with the radio. (Figure B)
4.
Locate the factory wiring harness
and antenna plug in the dash and
make all necessary connections to
the radio. Metra recommends using
the proper mating adapters from
Metra and/or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
5.
Secure the completed assembly into
the sub-dash using the factory hardware.
6. Snap the 7366 radio trim panel
into the factory trim panel, and
then reassemble the dash in
reverse order of disassembly.

Especificaciones del producto

Marca: Metra
Categoría: equipo de coche
Modelo: 99-7366B

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-7366B haz una pregunta a continuación y otros usuarios te responderán




equipo de coche Metra Manuales

equipo de coche Manuales

Últimos equipo de coche Manuales