Metra 99-7619 Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-7619 (8 páginas) en la categoría equipo de coche. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
REV. 11/7/2013 INST99-7619
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Table of Contents
APPLICATIONS
INSTALLATION INSTRUCTIONS FOR PART 99-7619
• ISO DIN radio provision with pocket
Textured ABS
A) Trim Panel BracketsB) Radio Trim Panel • C) Pocket • D) (4) #8 x 3/8” Phillips Screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7552 2010-Up Nissan Harness
Antenna Adapter:40-NI12 2010-Up Nissan Antenna Adapter
• Panel removal tool • Phillips screwdriver
• Socket Wrench
TOOLS REQUIRED
(all SL models and SV or SE models with Comfort and Convenience package)
(excluding S models) (excluding X models)
A B C D
Dash Disassembly
Nissan Titan 2013-up ........................................... 2
Nissan Frontier, Xterra 2013-up ............................ 2
Kit Assembly
ISO DIN radio provision......................................... 3
99-7619
2013-Up Nissan Titan
1. Unclip the entire dash panel
including the climate controls.
Unplug and remove the panel.
(Figure A)
2. Remove (4) Phillips screws
securing the radio. Unplug and
remove the chassis. (Figure B)
Dash Disassembly
(Figure A)
(Figure A)
(Figure B)
(Figure C)
(Figure B)
(Figure D)
2013-Up Nissan Frontier,
2013-Up Nissan Xterra
1. Unclip and remove the trim panel
above the radio and climate controls.
(Figure A)
2. Remove the (1) Phillips screw under
panel and the (2) Phillips screws
securing the radio brackets to the
sub dash. (Figure B)
3. Unclip and remove the entire panel
including the climate controls and
factory radio.
4. Remove (4) Torx screws securing the
radio to the trim panel. (Figure C, D)
Continue to kit assembly
99-7619
Kit Assembly
(Figure B)
(Figure C)
(Figure D)
(Figure A)
1. Cut and remove the shaded area
of the brackets for the 2013-Up
Frontier and Xterra.
(Figure A)
2. Cut and remove the shaded area of
the brackets for the 2013-up Titan.
(Figure A)
ISO DIN radio provision
1. Clip the brackets into the radio trim
panel.
(Figure B)
2. Mount the pocket to the radio
brackets with the (4) #8 x 3/8”
Phillips screws supplied.
(Figure C)
3. Slide the radio into radio brackets/
pocket assembly and secure with
screws supplied with the radio.
(Figure D)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
5. For the Titan, mount the new radio
assembly into the dash; for the
Frontier and Xterra, mount the
new radio assembly to the factory
dash panel. Reassemble dash in
reverse order of disassembly.
TitanFrontier, Xterra
Frontier/Xterra bracket configuration shown

Especificaciones del producto

Marca: Metra
Categoría: equipo de coche
Modelo: 99-7619

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-7619 haz una pregunta a continuación y otros usuarios te responderán




equipo de coche Metra Manuales

equipo de coche Manuales

Últimos equipo de coche Manuales