Metra 99-7817HG Manual de Usario

Lee a continuación 📖 el manual en español para Metra 99-7817HG (4 páginas) en la categoría equipo de coche. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 12/5/17 INST99-7817
I N S TA L L A T I O N I N S T R U C T I O N S
99-7817HG
KIT FEATURES
ISO DIN radio provision with pocket
Painted high-gloss black and silver
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8” Phillips screws • E) (4) White panel clips • F) (2) Black metal panel clips
A B C
F
D E
Honda CR-V LX trim 2017-up*
*Visit MetraOnline.com for up-to-date vehicle specific applications.
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-1731
Antenna Adapter: 40-HD11
Steering wheel control retention: ASWC-1
1.800.221.0932
|
MetraOnline.com
2
(Figure B)
(Figure A) (Figure A)
DASH DISASSEMBLY KIT PREPARATION
1. Unclip and remove the climate control
panel. (Figure A)
2. Remove (2) Phillips screws securing the
radio, then unclip, unplug, and remove
the radio. (Figure B)
Continue to Kit Preparation
1. Attach the
(4) white plastic panel clips,
and (2) black metal clips
to the
radio
trim panel
. (Figure A)
Continue to Kit Assembly
REV. 12/5/2017 INST99-7817HG 3
KIT ASSEMBLY
(Figure B)
(Figure C)(Figure A)
ISO DIN radio provision with pocket
1. Attach the
radio brackets
to the
radio trim pane
l using the (4) #8 x 3/8”
Phillips screws provided. (Figure A)
2. Secure the pocket to the radio brackets
using the (4) #8 x 3/8” Phillips screws
provided. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the bracket/panel
assembly from the back, and secure
it using the screws supplied with the
radio. (Figure C)
5. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or Axxess. Test the radio for
proper operation.
6. Secure the completed assembly into the
dash using the factory screws.
7. Reassemble the dash in the reverse
order of disassembly.

Especificaciones del producto

Marca: Metra
Categoría: equipo de coche
Modelo: 99-7817HG

¿Necesitas ayuda?

Si necesitas ayuda con Metra 99-7817HG haz una pregunta a continuación y otros usuarios te responderán




equipo de coche Metra Manuales

equipo de coche Manuales

Últimos equipo de coche Manuales