Metra JP-1018 Manual de Usario

Metra Speaker JP-1018

Lee a continuación 📖 el manual en español para Metra JP-1018 (16 páginas) en la categoría Speaker. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 202 METRA ELECTRONICS CORPORATION 4
I N S TA L L AT I O N I N S T R U C T I O N S
J -101P 8
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory r adio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
• Driver and passenger specific lower dash grilles
Cut templates and hardware
ABS injection molded, silver painted surround
Metal stamped grille insert
Used with OE or JP-1014 speaker upgrade dash pods
1 year warranty from defects
KIT COMPONENTS
• A) B) Template (Left & Right) Cut-in grilles (Left & Right) • C) Backing plates (Left & Right)
TOOLS REQUIRED
• Panel removal tool
• Phillips screwdriver
7mm and 13mm socket
TABLE OF CONTENTS
Left dash Disassembly ...................................... 2-3
Dash cut-in...................................................................4-5
Passenger side Disassembly....................... ...... 6-7
Jeep Wrangler (JL) 2018-2023,
Jeep Gladiator 2020-2 302
Visit for more detailed information about the product and up-to-date MetraOnline.com
vehicle specific applications
KIT FEATURES
ACB
REV. 1/17/2024 1
Dash cut-in...................................................... .................8
386.257.1187
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and remove the panel below the
steering column. Remove (2) Phillips
screw exposed. (Figures A,B)
2. Unclip, unplug, and remove the climate
control panel. (Figure C)
(Figure D)
(Figure E)
3. Remove (2) Phillips screws securing
the radio trim panel, then unclip and
remove. (Figure D)
4. Remove (1) Phillips screw securing the
dash pad, then unclip and remove.
(Figure E)
(Figure A)
(Figure B)
(Figure C)
REV. INSTJP-10181/17/2024 3
DASH DISASSEMBLY
5.Remove (8) Phillips screws securing the
instrument panel on the left side, and
airbag panel on the right side.
(Figure F, G)
6.Unclip the steering column shroud then
set aside. (Figure H)
Driver’s side removal:
7.Open the drivers door, then unclip and
remove the panel on the side of the
dash. Remove (5) Phillips screws
exposed. (Figure I)
8.Remove (5) Phillips screws securing
the speaker panel, then unclip and
remove. (Figure J)
(Figure I)
(Figure F)
(Figure G)
(Figure H) (Figure J)
Tip
Tip
Tip
TipTip:
:
:
: : Now would be an excellent time to install
a pair of JP-1014 6.5" speaker pods. For more
information scan the QR code below.

Especificaciones del producto

Marca: Metra
Categoría: Speaker
Modelo: JP-1018

¿Necesitas ayuda?

Si necesitas ayuda con Metra JP-1018 haz una pregunta a continuación y otros usuarios te responderán




Speaker Metra Manuales

Metra

Metra BC-HDLFP Manual de Usario

19 Septiembre 2024
Metra

Metra JP-1018 Manual de Usario

19 Septiembre 2024

Speaker Manuales

Últimos Speaker Manuales

OSD Audio

OSD Audio LS2 Manual de Usario

19 Septiembre 2024
Toa

Toa PC-3WR Manual de Usario

19 Septiembre 2024
Toa

Toa TZ-205 Manual de Usario

19 Septiembre 2024
Toa

Toa PC-2668 Manual de Usario

19 Septiembre 2024
Toa

Toa PC-3WR-L Manual de Usario

19 Septiembre 2024
Toa

Toa BS-1120W Manual de Usario

19 Septiembre 2024
Toa

Toa TZ-105 Manual de Usario

19 Septiembre 2024
Toa

Toa BS-1110W Manual de Usario

19 Septiembre 2024
Roku

Roku Streambar Manual de Usario

19 Septiembre 2024