MIA Laboratories 413 Tape Saturator Manual de Usario
MIA Laboratories
programas de audio
413 Tape Saturator
Lee a continuación 📖 el manual en español para MIA Laboratories 413 Tape Saturator (5 páginas) en la categoría programas de audio. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/5
413 TAPE SATURATOR
User Guide
MIA LABORATORIES
Greetings and Welcome!
Thank you for choosing MIA Laboratories.
Please take the time to read through this user guide in order to get familiar with the components and use of 413 Tape Saturator.
Overview
The 413 Tape Saturator reproduces the non-linear characteristics that would result when overdriving analog tape, as magnetic
saturation occurs with increasing amplitude of the ‘recorded’ signal. It offers 3 different types of Analog Tape, as well as 3 different
types of distortion.
For the saturation process, the signal gets dynamically changed, especially high frequency information, in response to its amplitude.
The resulting effect simulates the saturation of analog tape, in a controllable environment which can be adjusted according to your
preference.
The user can choose among 3 different types of Analog Tape, each corresponding to the noise and saturation characteristics of 3
different well known tape brands.
3 distortion types are also available, enabling the user to produce the harmonic content/distortion one would get by overdriving
certain Tube or Transistor circuits.
Features
● Advanced Tape Saturation algorithm
● Tube, Transistor and Soft Clipping Distortion
● Real tape-hiss
● ‘IEC on NAB’ playback equalization mode
Control functions and specifications
INPUT: Controls the level of input signal to the 413 Tape Saturator. Ranges from -48 to +6 dB.
OUTPUT: Controls the amount of output attenuation. Ranges from 0 to -48 dB.
DISTORTION: Selects the type of distortion produced. Type A and Type B simulate Tube and Transistor circuits, while Type C is
based on a soft clipping algorithm.
AMOUNT: Sets the amount of distortion that will be applied to the signal for distortion types A and B, while it acts like a dry/wet
control for Type C. Ranges from 0 to 11.
SATURATION: Sets the amount of Tape Saturation applied, ranging from 0 to 100%.
The effect and ‘depth’ of this adjustment is also affected by Tape Type, Flux Ref. and the nominal level of the signal itself.
So, the more the VU meters are driven into the red, the more saturation takes place.
TAPE: There are three different types to choose from. Each type carries its own Hiss noise and affects the saturation Depth.
HISS: Sets the amount of Hiss that will be introduced to the signal. It’s sound changes according to Tape Type.
Also note that the hiss noise is continuous and does not ‘start’ and ‘stop’ according to the DAW transport.
It will therefore be also present when signals are being monitored instead of being played-back by chanell tracks, and can be
completely turned-off by setting to 0.
EQUALIZATION:
NAB
: No change to the signal since the 413’s default state is NAB.
IEC
: Applies an approximation of the frequency response that would result if the original material was recorded in NAB and played
back with IEC eq.
FLUX REF.: Adjusts the “Flux reference” of the tape, therefore affecting the Depth of Tape Saturation, and the meters’ calibration.
Especificaciones del producto
| Marca: | MIA Laboratories |
| Categoría: | programas de audio |
| Modelo: | 413 Tape Saturator |
¿Necesitas ayuda?
Si necesitas ayuda con MIA Laboratories 413 Tape Saturator haz una pregunta a continuación y otros usuarios te responderán
programas de audio MIA Laboratories Manuales
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
programas de audio Manuales
- programas de audio Nomad
- programas de audio Antares
- programas de audio Air
- programas de audio Eventide
- programas de audio Steinberg
- programas de audio Waves
- programas de audio Atomix
- programas de audio Magix
- programas de audio Xils Lab
- programas de audio Best Service
- programas de audio CEDAR
- programas de audio MixVibes
- programas de audio Kuassa
- programas de audio PSP Audioware
- programas de audio SONORIS
- programas de audio Audified
- programas de audio Slate Digital
- programas de audio Blue Cat Audio
- programas de audio Overloud
- programas de audio Cherry Audio
- programas de audio FabFilter
- programas de audio IZotope
- programas de audio Metric Halo
- programas de audio Audiomodern
- programas de audio MeldaProduction
- programas de audio Sonible
- programas de audio Chocolate Audio
- programas de audio Sound Particles
- programas de audio Playfair Audio
- programas de audio Dear Reality
- programas de audio Tek'it Audio
- programas de audio MAAT
- programas de audio Audio Modeling
- programas de audio Nugen Audio
- programas de audio TAL Software
Últimos programas de audio Manuales
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024