Michael Kors Access Grayson MKT5028 Manual de Usario

Michael Kors Reloj inteligente Access Grayson MKT5028

Lee a continuación 📖 el manual en español para Michael Kors Access Grayson MKT5028 (9 páginas) en la categoría Reloj inteligente. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/9

- 2 -

ANALOG INSTRUCTIONS

Time Setting

1. Pull the crown out to position 2.

2. Turn the crown to set the hour and minute hands to the desired time.

3. Return the crown to position 1.

1 2

DATE MODELS

Date Setting

1. Pull the crown out to position 2.

2. Turn the crown either clockwise or counter-clockwise and set the date for the previous day. The direction

that moves the date varies on different watch models.

Time Setting

1. Pull crown out to position 3.

2. Turn counter-clockwise to advance the time and continue until the day changes to the present day.

3. Set to the correct time.

4. Push crown back to position 1.

123

DATE

OPEN HEART TY605

Time Setting

1. Pull crown out to position 2.

2. Turn crown clockwise to rotate hour and minute hands to desired time.

3. Push crown back to position 1.

1 2

OPEN HEART

CLOSED

AUTOMATIC WINDING MOvEMENTS

A timepiece with an automatic winding movement obtains the power to wind itself by the movement of your wrist, there is no battery. Therefore, not wearing the

timepiece for several consecutive days could exhaust the power reserve. If your watch stops, it is recommended that you manually wind the movement by rotating the

crown clockwise to achieve the necessary power reserve.

It is important that your timepiece is adjusted to match the size of your wrist. A loose fit may result in a loss in capacity of the timepiece to wind itself. When fully wound,

your timepiece has a power reserve of approximately 38 hours.

AUTOMATIC 2505

1. To start time-keeping, rotate the crown clockwise 15-20 times in position 1 until power reserve hand moves

from “-” low reserve to “+” full reserve. Pull crown out to position 2 and rotate clockwise to set time. Push

crown back to position 1.

2. Press A to set date. Each press of pusher A will advance the date by one increment. Hand in upper left

indicates date and will automatically reset to “1” at the end of a 31-day month.

NOTE: Do not set date and week between 10 p.m. and 2 a.m. (22 o’clock and 2 o’clock). Doing so could

damage the movement’s accuracy.

1 2

DATE POWER RESERVE

English

AUTOMATIC 2525

1. To start time-keeping, rotate the crown clockwise 15-20 times in position 1.

2. Pull crown out to position 2 and rotate clockwise to set time. Push crown back to position 1.

3. Press A to set month.

4. Press B to set date.

5. Press C to set weekday.

NOTE: Each press of the pushers will advance the values by one increment.

NOTE: Do not set date and week between 10 p.m. and 2 a.m. (22 o’clock and 2 o’clock). Doing so could

damage the movement’s accuracy.

1 2

DATE

MONTH

WEEKDAY

- 3 -

MULTIfUNCTION vX3J

Date Setting

1. Pull crown out to position 2.

2. Turn clockwise to advance the date hand.

3. Push crown back to position 1.

Day and Time Setting

1. Pull crown out to position 3.

2. Turn clockwise to advance hour and minute hands.

The hand showing days of the week will also move with the hour and minute hands. Keep turning until you

have reached the desired day.

24-Hour Sub-Dial Setting

The movement of the 24-hour hand corresponds to the hour and minute hands. When setting the time be sure to

check that the 24-hour hand is set properly.

1 2 3

DATE

24-HOUR

DAY

CHRONOGRAPH vD51B

Time/Date Setting

1. Before setting the time, make sure the chronograph second and minute hands are at the 12:00 position and

the chronograph is not running. See Chronograph Operation instructions below.

2. Pull crown out to position 2.

3. Rotate crown clockwise until the previous day’s date is displayed in date window.

4. Pull crown out to position 3 when the second hand is in the 12:00 position. Second hand will stop.

5. Rotate crown clockwise to set time.

6. Return crown to position 1.

NOTE: Make sure that AM/PM is set correctly. Do not set date between 9:00 p.m. and 1:00 a.m. or day may

not change properly.

Chronograph Operation

1. Press A to start/stop the chronograph.

2. Press B to reset.

Split Time

1. Press B while the chronograph is running.

2. Press B again to return to the chronograph.

3. Press A to finalize timing.

4. Press B to reset.

Chronograph Zero Reset

1. Pull crown out to position 3.

2. Press A to reset the chronograph second hand to 12:00 (zero) position. Each press advances the

chronograph second hand one mark. If A is held down for over 2 seconds, the chronograph second hand

advances continuously.

NOTE: Chronograph minute hand moves simultaneously with chronograph second hand.

3. Press B to reset the chronograph minute hand. Repeat step 2 instructions.

4. Return crown to position 1 when chronograph hands are reset to zero.

CHRONO

SECOND HAND

CHRONO

MINUTE HAND

1 2 3

DATE

CHRONOGRAPH ISA 8172/220

Time/Day Setting

1. Pull crown out to position 3.

2. Rotate crown to set time.

3. To adjust day, continue rotating crown 24 hours until day is correct.

4. Return crown to position 1.

Date Setting

1. Pull crown out to position 2.

2. Rotate crown clockwise until the correct date is shown in the date window.

3. Return crown to position 1.

Chronograph Operation

1. Press A to start/stop the chronograph.

2. Press B to reset.

NOTE: After 2 hours of continuous running, the chronograph will automatically stop and reset to save

the battery.

Split Time

1. Press B while the chronograph is running.

2. Press B again to return to the chronograph.

3. Press A to finalize timing.

4. Press B to reset.

1 2 3

DAY

SECOND HAND

CHRONO MINUTE HAND

CHRONO 1/5

SECOND HAND

DATE

- 4 -

CHRONOGRAPH OS10 (without date: OS30)

Time Setting

1. Pull crown out to position 3.

2. Turn crown to set the desired time.

3. Return crown to position 1.

Date Setting

1. Pull crown out to position 2.

2. Turn crown clockwise until the correct date is shown in the date window.

3. Return crown to position 1.

Chronograph Operation

1. Press A to start/stop the chronograph.

2. Press B for reset.

Adjusting The Chronograph

1. Pull crown to position 3.

2. Press A to reset the second hand to “0.”

3. Press B to reset the chronograph minute and hour hands.

4. Reset the watch to the current time and return crown to position 1.

123

MINUTE HAND

HOUR HAND

SECOND HAND

DATE

CHRONOGRAPH OS20 / OS21

Time Setting

1. Pull crown out to position 3. Chronograph second hand will return to “0.”

Do not return the crown to position 1 while the hands are returning to “0,” or else the position the

hands are at when this is done will be recognized as the new “0” position.

2. Turn crown to set the desired time.

3. Return the crown to position 1.

Date Setting

1. Pull crown out to position 2.

2. Turn crown counter-clockwise until the correct date is shown in the date window.

3. Return crown to position 1.

Chronograph Zero Reset

This procedure should be performed when the chronograph second hand does not return to the “0”

position after the chronograph has been reset.

1. Pull crown out to position 3.

2. Press A to set the chronograph second hand to the “0” position.

NOTE: The hands move quickly if the pushers are kept pressed.

3. Once the hand has been zeroed, reset the time and return the crown to position 1.

Do not return the crown to position 1 while the hands are returning to “0.” Doing so will cause the

position of the hands to be recognized as the new “0” position.

Chronograph Operation

This chronograph is able to measure and display time in 1/1 second up to maximum of 1 hour.

1. Press A to start/stop the chronograph.

2. Press B to reset the chronograph.

123

CHRONOGRAPH

MINUTE HAND

CHRONOGRAPH

MINUTE HAND

24-HOUR HAND

CHRONOGRAPH

SECOND HAND

CHRONOGRAPH

SECOND HAND

DATE

OS20

OS21

CHRONOGRAPH STOPWATCH JS25, vD53

Setting the Time

1. Pull the crown out to position 3.

2. Turn the crown to set hour and minute hands.

3. After the time has been set, push the crown back to position 1.

Setting the Date

1. Pull the crown out to position 2.

2. Turn the crown clockwise to set the date.

• If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the

following day.

3. After the date has been set, push the crown back to position 1.

Using the Chronograph

1. Press A to start/stop the chronograph.

2. Press B to reset the chronograph to zero.

Chronograph Reset (including after replacing the battery)

This procedure should be performed when the stopwatch second or minute hand does not return to the

zero position.

1. Pull the crown out to position 3.

2. Press A to set the chronograph second hand forward. Press B to set the chronograph second hand

backward.

• The chronograph minute hand is synchronized with the chronograph second hand.

• The chronograph second hand can be advanced rapidly by continuously pressing A or B.

3. Once both hands have been set to zero, reset the time and return the crown to position 1.

123

CHRONOGRAPH

SECOND HAND

CHRONOGRAPH

MINUTE HAND 24-HOUR HAND

DATE

Especificaciones del producto

Marca:	Michael Kors
Categoría:	Reloj inteligente
Modelo:	Access Grayson MKT5028
Color del producto:	Zwart
Peso.:	25100 g
Ancho:	397 mm
Profundidad:	406 mm
Altura:	638 mm
Energía promedio:	- W
Corriente de entrada:	Ja
Uso recomendado:	Universeel
Impedancia:	8 Ohm
Canales de salida de audio:	1.0 kanalen
Colocación de los altavoces:	Vloer
Número de conductores:	1
altavoz de graves:	Ja
Rango de frecuencia:	55 - 18000 Hz
Tipo de altavoz:	2-weg
Frecuencia de cruce:	2500 Hz
Posición del orador:	Voorkant