Milwaukee 2774-20 Manual de Usario

Milwaukee Pompa 2774-20

Lee a continuación 📖 el manual en español para Milwaukee 2774-20 (15 páginas) en la categoría Pompa. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/15

Cat. No. / No de cat.

2774-20

M18™ FORCE LOGIC™ 10,000 PSI HYDRAULIC PUMP

POMPE À PRESSION HYDRAULIQUE, 10 000 PSI M18™

FORCE LOGIC™

BOMBA HIDRÁULICA DE 10 000 PSI M18™ FORCE LOGIC™

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING

Read all safety warnings, instruc-

tions, illustrations and specica-

tions provided with this power tool. Failure to

follow all instructions listed below may result in

electric shock, re and/or serious injury. Save all

warnings and instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-oper-

ated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

• Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

• Keep children and bystanders away while operat-

ing a power tool. Distractions can cause you to lose

control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodied plugs and matching outlets will

reduce risk of electric shock.

• Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

• Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

• When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

• If operating a power tool in a damp location is

unavoidable, use a ground fault circuit interrupter

(GFCI) protected supply. Use of an GFCI reduces

the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

• Use personal protective equipment. Always

wear eye protection. Protective equipment such

as a dust mask, non-skid safety shoes, hard hat or

hearing protection used for appropriate conditions

will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch

is in the o󰀨-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on

the switch or energizing power tools that have the

switch on invites accidents.

• Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

• Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or

jewelry. Keep your hair and clothing away from

moving parts. Loose clothes, jewelry or long hair

can be caught in moving parts.

• If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

• Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles. A careless action can

cause severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power

tool for your application. The correct power tool

will do the job better and safer at the rate for which

it was designed.

• Do not use the power tool if the switch does not

turn it on and o󰀨. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

• Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

• Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrained users.

• Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition that

may a󰀨ect the power tool’s operation. If damaged,

have the power tool repaired before use. Many

accidents are caused by poorly maintained power

tools.

• Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed. Use of the power tool

for operations di󰀨erent from those intended could

result in a hazardous situation.

• Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used

with another battery pack.

• Use power tools only with specically designated

battery packs. Use of any other battery packs may

create a risk of injury and re.

• When battery pack is not in use, keep it awa

from other metal objects, like paper clips, coins

SYMBOLOGY

Volts

Direct Current

WARNING

To reduce the risk of arc

ash, electric shock and

property damage, work on deenergized

line s whe n pos sib le. Too l is not

insulated. Should work on energized

lines be required, ensure all proper

precautions, including those contained

in NFPA 70E, have been taken rst.

To reduce the risk of injury, wear

safety goggles or glasses with side

shields when operating or servicing

the tool.

Read operator's manual.

IP54 Ingress Protection

Auto-Dump mode

Hold Pressure mode

Wireless mode

Wireless Power Switch o󰀨

Wireless Power Switch on

C US

UL Listing for Canada and U.S.

FUNCTIONAL DESCRIPTION

1. Beacon Light

2. Mode Lights

3. Auto-Dump Mode Button

4. Hold Pressure Mode Button

5. Wireless Mode Button

6. Manual Pressure Release Button

7. Parker 3000 series coupler

8. Coupler Swivel

9. ONE-KEY™ Indicator

10. Bluetooth Light

11. Pressure Indicators

12. Light 1 (Wireless Mode)

13. Advance Button

14. Retract Button

15. Light 2 (Wireless Mode)

16. Wireless Power Switch

17. Remote

18. Oil Reservoir

Sight Line

19. Battery Bay

20. Oil Fill Cap

21. Cord

22. Cord Wrap

23. Vent

24. Carry/Lifting

Handle

ASSEMBLY

Especificaciones del producto

Marca:	Milwaukee
Categoría:	Pompa
Modelo:	2774-20
Color del producto:	Wit
Ancho:	206.5 mm
Profundidad:	353.4 mm
Altura:	385 mm
Amable:	PC
factor vorm:	Mini Tower
Interruptor-encendido-/-apagado:	Ja
Número de puertos USB 2.0:	1
Adecuado para:	Gamen
Ubicación de la iluminación:	Back, Front
Entradas de audio:	Ja
Salida de audio:	Ja
Material:	ABS, SPCC
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	2
Color de la iluminación:	Blue, Green, Red
Botón de reinicio:	Ja
Fuente de alimentación incluida:	Nee
Número de bahías de 2,5":	3
Número de bahías de 3,5":	2
Tamaños de disco duro admitidos:	- "
Número de ranuras de expansión:	4
Gestión de cables mejorada:	Ja
Exposición:	Ja
Grosor del material:	0.5 mm
Factores de forma de placa base compatibles:	Micro ATX, Mini-ITX
Ventana lateral:	Ja
Altura máxima del refrigerador de la CPU:	158 mm
Longitud máxima de la tarjeta gráfica:	297 mm
Número máximo de ventiladores frontales:	2
Diámetros de soporte de ventiladores frontales:	120,140 mm
Número máximo de fans en la cima.:	2
Diámetros de soporte de ventiladores superiores:	120 mm
Número máximo de ventiladores traseros:	1
Diámetros de soporte de ventiladores traseros:	120 mm
Ventiladores traseros instalados:	1x 120 mm
Factores de forma de fuente de alimentación admitidos:	ATX
Número de ventiladores frontales instalados:	2x 140 mm
Capacidad de refrigeración líquida:	Ja
Dimensiones del radiador delantero soportado:	120,240 mm
Dimensiones del radiador trasero soportado:	120 mm