Milwaukee M12 Fuel HATCHET 2527-21 Manual de Usario

Milwaukee máquina de aserrar M12 Fuel HATCHET 2527-21

Lee a continuación 📖 el manual en español para Milwaukee M12 Fuel HATCHET 2527-21 (21 páginas) en la categoría máquina de aserrar. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/21

Cat. No. / No de cat.

2527-20

M12 FUEL™ HATCHET™ 6" PRUNING SAW

SCIE D'ÉLAGAGE DE 152 (6") HATCHET™ DE M12 FUEL™mm

SIERRA PODADORA DE 152 mm (6") HATCHET™ DE M12 FUEL™

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING

Read all safety warnings, instruc-

tions, illustrations and specica-

tions provided with this power tool. Failure to

follow all instructions listed below may result in

electric shock, re and/or serious injury. Save all

warnings and instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-oper-

ated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

• Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

• Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

•

Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodied plugs and matching outlets will

reduce risk of electric shock.

• Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

• Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

• When operating a power tool outdoors, use an exten-

sion cord suitable for outdoor use. Use of a cord suit-

able for outdoor use reduces the risk of electric shock.

• If operating a power tool in a damp location is

unavoidable, use a ground fault circuit interrupter

(GFCI) protected supply. Use of an GFCI reduces

the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

• Use personal protective equipment. Always wear

eye protection. Protective equipment such as a dust

mask, non-skid safety shoes, hard hat or hearing

protection used for appropriate conditions will reduce

personal injuries.

• Prevent unintentional starting. Ensure the switch

is in the o󰀨-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on the

switch or energizing power tools that have the switch

on invites accidents.

• Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a ro-

tating part of the power tool may result in personal injury.

• Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

• Dress properly. Do not wear loose clothing or

jewelry. Keep your hair and clothing away from

moving parts. Loose clothes, jewelry or long hair can

be caught in moving parts.

• If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust

collection can reduce dust-related hazards.

• Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the

job better and safer at the rate for which it was designed.

• Do not use the power tool if the switch does not turn

it on and o󰀨. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

• Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Pow-

er tools are dangerous in the hands of untrained users.

• Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may a󰀨ect

the power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

di󰀨erent from those intended could result in a hazardous

situation.

• Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used

with another battery pack.

• Use power tools only with specically designated

battery packs. Use of any other battery packs may

create a risk of injury and re.

• When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal to

another. Shorting the battery terminals together may

cause burns or a re.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact acci-

dentally occurs, ush with water. If liquid contacts

eyes, additionally seek medical help. Liqui

ejected from the battery may cause irritation or burns

• Store pruning saw when not in use. Pruning saw

should be stored in a dry and high or locked area out

of the reach of children. When storing pruning saw

place the cover on the bar and chain.

• Battery operated units do not have to be plugged

into an electrical outlet; therefore, they are always

in operating condition. Be aware of possible haz-

ards even when unit is not operating.

• Save these instructions. Refer to them frequently

and use them to instruct others who may use this

product. If you loan someone this product, loan them

these instructions also.

• After each use, clean the machine with a soft dry

cloth. Remove any chips, dirt and debris in the

battery bay.

• Follow the manufacturer’s sharpening and main-

tenance instructions for the saw chain. Decreas-

ing the depth gauge height can lead to increased

kickback.

• Keep handles dry, clean, and free from oil and

grease. Greasy, oily handles are slippery causing

loss of control.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

•

WARNING

Some dust created by power sanding,

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

lter out microscopic particles.

SPECIFICATIONS

Cat. No. 2527-20 .....................................................

Volts 12 DC..............................................................

Battery Type .................................................M12™

Charger Type M12™................................................

RPM ................................................................2,650

Chain Speed ............................................984 ft/min

Bar Length ........................................................... 6"

Cutting Capacity ............................................... 5.5"

Chain Oil Tank Capacity ................................1.7 oz

Replacement Bar .................................. 49-16-2733

Chain Gauge ................................................ 0.043"

Replacement Chain .............................. 49-16-2732

Chain Type ........................................ Low kickback

Chain Pitch .....................................3/8" Low prole

Chain Teeth .........................................................28

Recommended Ambient

Operating Temperature ......................0°F to 125°F

• Dress Properly - Wear snug tting clothing. Always

wear heavy, long pants, long sleeves, overalls, jeans

or chaps made of cut resistant material or ones that

contain cut resistant inserts. Wear non-slip safety

footwear. Wear non-slip heavy duty gloves to improve

your grip and to protect your hands. Do not wear

jewelry, short pants, sandals, or go barefoot. Do not

wear loose tting clothing, which could be drawn into

the motor or catch the chain or underbrush. Secure

hair so it is above shoulder level.

• Heavy protective clothing may increase operator

fatigue, which could lead to heat stroke. During

weather that is hot and humid, heavy work should be

scheduled for early morning or late afternoon hours

when temperatures are cooler.

• Always wear proper eye protection with side

shields, marked to comply with ANSI Z87.1 when

operating the pruning saw.

• Always be aware of what you are doing when

using the pruning saw. Use common sense. Do

not operate the pruning saw when you are tired, ill, or

under the inuence of alcohol, drugs, or medication.

• Keep all parts of your body away from the saw

chain when the unit is running.

• Never let anyone use your pruning saw who has

not received adequate instructions in its proper

use. This applies to rentals as well as privately owned

saws.

• Before you start the unit, make sure the saw chain

is not contacting any object.

• Stop the pruning saw before setting it down.

• Maintain the unit with care. Keep the cutting edge

sharp and clean for best performance and to reduce

the risk of injury. Follow instructions for lubricating

and changing accessories.

• Maintain a rm grip on the recommended grasp-

ing surfaces. If an operation cannot be performed

safely with two hands on the saw, USE EXTREME

CAUTION.

• During operations where it is necessary to use

one hand, such as to steady or control the work-

piece/branch, guide workpiece away from you, or

provide better visibility to the work area:

• Keep free hand clear of the chain and out of the

cutting path.

• Maintain a rm grip on the branch being cut to avoid

"skating" or "bouncing" of the saw.

• Never cut above shoulder height.

• Do not cross arms or overreach.

• Always cut away from yourself.

• -Avoid excess exing or tension on the branch be

ing cut.

• Do not operate a pruning saw that is damaged, im-

properly adjusted, or not completely and securely

assembled. Chain should slow to a stop when the

switch trigger is released. If the chain continues to

turn after the switch trigger has been released, have

the unit serviced by an authorized service center.

• Do not force the pruning saw. The job can be

performed better and safer at the rate for which it

was intended.

• Always use the right product for your application.

The pruning saw should be used for cutting wood only.

Never use the pruning saw to cut plastic, masonry or

non-wood building materials.

• Use extreme caution when cutting thin branches,

vines or small underbrush. The slender material

may catch the saw chain and be whipped toward you

or pull you o󰀨 balance. We recommend using hedge

trimmers or brush cutters for these operations.

SYMBOLOGY

Especificaciones del producto

Marca:	Milwaukee
Categoría:	máquina de aserrar
Modelo:	M12 Fuel HATCHET 2527-21
Color del producto:	Zwart
Peso.:	660 g
Ancho:	72 mm
Profundidad:	175 mm
Altura:	35 mm
Certificación:	ITE EN/UL/IEC 60950
Destinado a:	Universeel
Certificados de sostenibilidad:	RoHS
Cantidad por paquete:	1 stuk(s)
Voltaje de entrada:	85 - 264 V
Potencia de salida:	160 W
Tipo de comida:	Binnen
Corriente de salida:	8 A
Abarcando:	20 V
Tipo de corriente de alimentación:	AC-naar-DC