Milwaukee M18 FUEL 2826-22 Manual de Usario
Lee a continuación 📖 el manual en español para Milwaukee M18 FUEL 2826-22 (3 páginas) en la categoría Batería. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/3
Cat. No. / No de cat.
2826-20
M18 FUEL™ 14" AND 12" TOP HANDLE CHAINSAW
SCIE À CHAÎNE À POIGNÉE SUPÉRIEURE DE 355,6 mm (14")
ET 304,8 mm (12") M18 FUEL™
SIERRA ELÉCTRICA CON ASA SUPERIOR DE 355,6 mm (14") Y
304,8 mm (12") M18 FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and specica-
tions provided with this power tool. Failure to follow
all instructions listed below may result in electric shock,
re and/or serious injury. Save all warnings and in-
structions for future reference. The term "power tool"
in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the o-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on
the switch or energizing power tools that have the
switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool
will do the job better and safer at the rate for which
it was designed.
• Do not use the power tool if the switch does not
turn it on and o. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may aect the power tool’s operation. If damaged,
have the power tool repaired before use. Many ac-
cidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations dierent from those intended could
result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
3
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acciden-
tally occurs, ush with water. If liquid contacts
eyes, additionally seek medical help.
Especificaciones del producto
| Marca: | Milwaukee |
| Categoría: | Batería |
| Modelo: | M18 FUEL 2826-22 |
¿Necesitas ayuda?
Si necesitas ayuda con Milwaukee M18 FUEL 2826-22 haz una pregunta a continuación y otros usuarios te responderán
Batería Milwaukee Manuales
7 Octubre 2024
17 Septiembre 2024
16 Septiembre 2024
16 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
13 Septiembre 2024
Batería Manuales
- Batería Bosch
- Batería Panasonic
- Batería DeWalt
- Batería Nikon
- Batería Canon
- Batería Apc
- Batería Vetus
- Batería Hikvision
- Batería Arris
- Batería Ozito
- Batería Leica
- Batería Black And Decker
- Batería Vonroc
- Batería Hilti
- Batería Ryobi
- Batería Worx
- Batería Hähnel
- Batería Victron Energy
- Batería Cramer
- Batería Berg
- Batería Tripp Lite
- Batería Stinger
- Batería Toa
- Batería Energenie
- Batería Hama
- Batería Gardena
- Batería Sennheiser
- Batería Varta
- Batería Sandberg
- Batería Biltema
- Batería Digitus
- Batería Powerplus
- Batería Cobra
- Batería Valcom
- Batería McCulloch
- Batería Shure
- Batería Conrad
- Batería Kress
- Batería Stihl
- Batería Mestic
- Batería Fluke
- Batería For_Q
- Batería Zipper
- Batería CyberPower
- Batería HQ
- Batería Xtorm
- Batería Watson
- Batería Scosche
- Batería Impact
- Batería Arctic Cooling
- Batería Toolcraft
- Batería Monacor
- Batería Energizer
- Batería Bolt
- Batería Duracell
- Batería Anova
- Batería Ultron
- Batería EGO
- Batería PNY
- Batería PowerDrive
- Batería Variotek
- Batería Neewer
- Batería Renata
- Batería APSystems
- Batería TCW Technologies
- Batería Enerdrive
- Batería Tecnoware
- Batería Ventev
Últimos Batería Manuales
21 Octubre 2024
20 Octubre 2024
8 Octubre 2024
7 Octubre 2024
6 Octubre 2024
4 Octubre 2024
1 Octubre 2024
29 Septiembre 2024
24 Septiembre 2024
24 Septiembre 2024