MiTone MITSP8 Manual de Usario

MiTone radio reloj MITSP8

Lee a continuación 📖 el manual en español para MiTone MITSP8 (1 páginas) en la categoría radio reloj. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

Speaker for iPhone

MODEL: MITSP8

(iPod/iPhone not included)

INSTRUCTION MANUAL

Table of Content Page No.

CONTENTS ......………………………………………………………………………….....1

GENERAL SAFETY INSTRUCTION………………………………………………..........2

PRODUCT FEATURES …………………………………………………………..............3

PREPARATION FOR USE........………………………………………………………......4

LOCATION OF CONTROLS …………………….………………………………….........6

BASIC OPERATION…………………………………………………………………......…7

RADIO OPERATION………………………………………………………………….........7

LISTENING TO YOUR iPod/iPhone………………………………………………….......8

AUXILIARY INPUT …………………………………………………………………….......9

APPS OPERATION …………………………………………………………………....…..9

CARE AND MAINTENANCE ………………………………………………………........17

TROUBLESHOOTING GUIDE ……………………………………………………….....18

SPECIFICATIONS ……………………………………………………………………......20

GENERAL SAFETY INSTRUCTION

BASIC OPERATION

LISTENING TO YOUR iPod/iPhone

AUXILIARY INPUT

APPS OPERATION

RADIO OPERATIONS

READ ALL INSTRUCTIONS BEFORE USE

Congratulations on your purchase of this speaker system with iPod dock. To get

the most from your speaker system, please take a few minutes to read these

instructions.

Press the POWER/MODE button on the main unit or remote control to turn

the unit ON once the power adaptor is connected. The system will switch to

the last selected source. The power on indicator around the power button will

be lit. The power indicator LED shows a different colour when the unit in

different modes (iPod/ Radio/ AUX in mode). Press the power button again

on the remote control or press and hold the power button about 2 seconds on

the unit to power the unit OFF.

Press the POWER/MODE switch button on the main unit or remote control to

select between FM Radio, AUX or iPod mode. The power indicator LED around

the power button lights up in a different colour for the different modes. “RADIO”

shows red and blue, AUX lights in red, and iPod lights in blue once you

select the desired mode.

Press this button in the remote control to play or pause the music in iPod mode.

1.) Press the power button on the main unit or remote control to turn on the unit.

Press the Mode button repeatedly until the power indicator changes to

blue/red color to select the RADIO mode.

2.) To manually tune to the desired station, repeatedly press the SKIP/TUNE

or button on the remote control.

3.) To automatically search for stations with strong signals, press and hold the

SKIP/TUNE or button on the unit or the remote control until the frequency

read out on display begins to scan then release the button. The tuner will stop

on the first strong station signal it finds.

4.) Adjust the sound level by pressing the VOLUME +/- button on the unit or the

remote control repeatedly.

Press the Volume up or down button repeatedly to adjust sound level.

In radio, press the or button on the remote control to search the tune

manually or automatically.

In iPod mode, press the or button to skip the music to the previous or

next track. Press and hold the or button to search the music track quickly.

NOTE: This unit is not magnetically shielded and may cause color distortion

on the screen of some TVs or video monitors. To avoid this, you may need to

move the unit further away from the TV or monitor if unnatural color shifts or

image distortion occurs.

WARNING - To reduce the risk of fire, electric shock or serious

personal injury. Do not open the unit. This product is intended for indoor,

non-industrial, non-commercial use; do not use the product outdoors.

Do not mount this product on a wall or ceiling.

1. Always follow basic safety precautions when using electrical products.

Children should be supervised to ensure that they do not play with appliances.

2. Do not allow children to operate the unit without adult supervision.

3. Read this instruction manual carefully before you attempt to use the unit.

4. Consult your dealer or service personnel if you have further questions about

the operation or safety of the unit.

5. Do not expose the product to temperatures above 40°C. Keep it in moderate

climates.

6. The apparatus shall not be exposed to dripping or splashing and no objects

filled with liquids, such as vases, shall be placed near the product. Dry

location use only.

7. No naked flame sources, such as candles, should be placed on the product.

8. Keep the power cord and product away from heated surfaces.

9. Keep at least 5 cm of space around the unit for sufficient ventilation.

10. The ventilation holes should not be blocked up by things such as newspapers,

dusters, curtains, etc. Place the product where there is good air circulation.

11. Do not place or drop the product into water or other liquids. If the product falls

into water, immediately unplug it from the electrical outlet; do not pull on the

power cord.

12. Do not expose batteries to excessive heat, such as fire, direct sunlight, etc.

13. Dispose of used batteries in an environmental friendly way.

14. Do not place the unit near TV, speakers, and other objects that generate

strong magnetic fields.

15. Do not clean the unit with strong chemical agents.

16. This product has no user-serviceable parts. Do not attempt to dismantle or

repair this unit yourself. This unit should be repaired by qualified service

technician only.

17. Do not operate the unit if it is not working normally or has been damaged in

any way. Turn the unit off. Unplug it from the power source. And consult

service personnel.

18. Do not remove any fixed cover. This will increase the chance of electrical shock.

19. Press the player’s buttons gently. Pressing them or the screen too hard can

damage the player.

20. Do not push any objects into holes, slots, or openings on the unit. This could

result in fatal electric shock.

21. Do not subject the product to harsh impacts. Do not drop the appliance. This

may result in damage to the product and loss of data.

22. Care is required for the use of this apparatus in tropical and/ or moderate

climates.

23. Do not use the player in an extremely dry environment, as this can lead to

static discharge, which can damage the player.

24. Only use attachments/ accessories specified by the manufacturer.

25. Unplug this apparatus during lightning storms or when it is unused for long

periods of time.

Always follow basic safety precautions when using electrical products,

especially when children are present.

PRODUCT FEATURES

This music system has an iPod Dock with following features:

Play and Charge your dockable iPod Touch or iPhone

3.5mm Auxiliary input for MP3 player connection

Apps function (FM radio, weather station and alarm clock)

Remote control operation

AC adaptor operation

LOCATION OF CONTROLS PREPARATION FOR USE

PREPARATION FOR USE

Turning the unit ON or OFF Notes:

Manual tune to select weaker stations that might be bypassed during

automatic tuning.

Hints for the Best Reception

To obtain the best FM reception, unwrap and fully extend the FM Antenna on

the rear of the unit and adjust its direction.

CHARGING YOUR iPod Touch or iPhone

Note:

(1) If you connected the Line Out Jack of your external device then you only need

to adjust the volume control of this system. If you connected the Headphone

Jack of your external device then you may need to adjust both the volume

control of your external device and the volume control of this system to find

the most desirable volume setting.

(2) Press the power button to turn off the system when you finish listening.

Don't forget to switch off the power of your external device as well.

1.) This system is equipped with a dock to allow you to connect your iPod Touch

or iPhone to enjoy your favorite music via the speaker system. The system

is able to fit most types of currently available iPod. iPod models with 30-pin

dock connector are as below: Nano 1 / 2 /3 /4 generation, iPod 5

generation (video) and iPod nano 6 . iPod touch 1 and 2 Generation

3 and 4 and iPod classic . Grip the iPod and pull it upwards and out

carefully. This unit can also charge your iPod or iPhone when it is connected

well via the dock.

Note: Please be careful when seating the iPod into the docking to avoid

damaging the 30-pin connector on the iPod or in the docking system.

2.) Press the power button to turn on the unit.

3.) Press the MODE button repeatedly until the power indicator changes to

to select iPod mode. The iPod will start playing automatically and

start charging immediately.

4.) Press the iPod PLAY/PAUSE button on the remote control to pause or

resume iPod playback.

5.) Adjust the sound level of the speaker system by pressing VOLUME +/-

buttons on the remote control or the unit.

6). Press the the SKIP/TUNE or button to skip to the next or previous song;

7). Press and hold the SKIP/TUNE or button for fast-forwarding or fast-back

forwarding during the playback.

8). Press the MENU button on the remote control once to go the menu screen

of the iPod, Press the MENU up or down button to highlight the item you want

to operate, and press the iPod Enter button to confirm your selection. (You

can also operate the button on your iPod directly except the volume level

when it is connected to the dock)

Note: The volume level cannot be adjusted using the volume control on your

Pod after being docked.

When your iPod or iPhone docked to the unit, it will be recharged automatically

in standby, iPod, Radio and AUX in mode until it is fully charged. Other

non-docking types of iPod will not be charged.

This unit provides an auxiliary audio signal input jack for connecting external audio

devices like MP3 players, CD players and older, non-dockable iPod (except iPod

shuffle 3 gen) and listen to your external source through the speakers of

this system.

1. Use an audio cable (included) with one 3.5 mm stereo plug on each end of

the cable.

2. Plug one end into the Aux-in jack on the main unit and the other end of the

cable into the Line-out Jack or Headphone Jack of your external audio device.

3. Turn on the external audio device.

4. To select auxiliary audio input, press the MODE button until the power

indicator changes to red to select “AUX” mode.

5. The volume level can now be controlled through the main unit. Operate all

other functions on the auxiliary device as usual.

This appliance supports the “Mitone speaker” Apps function,

1. If there’s no “Mitone” Apps in your iPod Touch or iPhone, a dialog box will

appear on your iPod or iPhone screen asking you to install the software

from the App store.

2. Click the “Yes” to confirm your selection. The iPod Touch or iPhone will

attempt to connect to the iTunes App Store via Wi-Fi automatically.

Press the App store icon to login in to the searching interface,

input “Mitone speaker” to search for the App software; it’s free for installation.

3. If there’s no Wi-Fi connection please install iTunes to your computer and

download the Mitone App directly from iTunes.

Connect your iPhone or iTouch to your computer. Open the iTunes software,

click iTunes store, input "Mitone speaker" to search for the Mitone App,

and then download it to iTunes.

Click" Sync Apps", choose the "Mitone speaker" App and click "Apply" to

synchronize the App to your iPod Touch or iPhone.

Once the Mitone App sync is complete disconnect your iPod Touch or iPhone

from the computer. The Mitone App has installed successfully.

Note: The Music System and the Mitone App (apart from Video mode) are

compatible with iPhone or iTouch operating system software version iOS4.0.

To ensure full compatibility we recommend the use of operating system

software version iOS 4.1 on your iPhone or iTouch.

Connect the iPod Touch or iPhone to the docking port of the Music System.

Press the Power/Mode button on the front panel of the Music System or the

Power button of the remote control to turn on the Music System. The

Power/Mode button LED indicator will glow Blue when the Music System is

in iPod mode, find and select the Mitone App icon to enter the Main Interface.

VOLUME UP and DOWN buttons

Radio Tuning

SKIP/TUNE or button

MODE selection CONNECTING iPod Touch OR iPhone TO YOUR SPEAKER SYSTEM

AUX IN CONNECTION

SPECIFICATIONS

Main power 100-240V AC 50/60Hz output: DC 12V 1500mA.

Main unit DC input: DC 12V / 1500mA

Battery for Remote Control 1 x 3V CR2025 Lithium Battery

Output power 2 x 6W RMS

Dimensions 378 x 134 x 153 mm

If at any time in the future you should need to dispose of this product please note that:

Waste electrical products should not be disposed of with household waste. Please

recycle where facilities exist. Check with your Local Authority or retailer for recycling

advice. (Waste Electrical and Electronic Equipment Directive)

Capi website : www.capi.com

Radio Frequency Range FM 88 - 108 MHz

Power Requirement

Frequency Range

FRONT VIEW OF THE MAIN UNIT

REAR VIEW OF THE MAIN UNIT

REMOTE CONTROL

REPLACING THE BATTERY FOR THE REMOTE CONTROL

CAUTION: There is danger of explosion if battery is incorrectly

replaced. Replace the battery only with the same or equivalent type.

CONNECTING THE AC POWER ADAPTOR

Unpack the unit carefully. Carefully remove all the accessories from the display

carton. We recommend that you save the box and packing materials, in case you

wish to store the unit. Don’t remove any labels or sticker on the rear of the unit and

adaptor.

Before setting up the unit, verify that the following accessories are present:

1. You can enjoy music from most portable music players by using this

speaker system. Connect the 3.5mm Aux-In cable to the AUX-IN jack and

the other end to the headphone or line-out jack of your preferred device.

2. Press the MODE button the remote control or the unit to select AUX mode,

the “AUX” mode indicator lights red around power button. The sound from

other auxiliary device can be heard once the AUX in cable is connected.

(Audio cable with 3.5mm plug is included)

Select the play function on the auxiliary device and the sound output can then

be heard from the unit. Disconnect the audio cable if you are not going to use

the aux in mode.

1. Volume - / Tune – button

2. Power / Mode button

3. LED indicator

4. Volume +/Tune + button

5. Remote sensor

6. Left/ right speaker

7. DC 12V in jack

8. FM wiring antenna

9. AUX in jack

1. Power ON / OFF Button

2. Function Select Button

3. iPod menu up button

4. iPod SKIP Previous /TUNE- button

5. iPod SKIP Next /TUNE+ button

6. iPod Play/Pause Button

7. iPod menu down Button

8. iPod menu Button

9. iPod menu enter Button

10. Volume Down Button

11. Volume Up Button

The remote control operates on one CR2025 battery (included). To extend the

life of the original battery, the factory has inserted a small clear plastic spacer

tab between the lithium battery and the battery terminal, to activate the remote

control, remove the insulation tab attached in the battery compartment.

When the operation of the remote control becomes

intermittent or unsatisfactory,

replace the original battery with a new 3-volt

lithium battery.

1.) Slide out the battery holder from the remote

control case.

2.) Replace the 3V CR2025 battery. Be sure the battery

is installed correctly.

The remote will not work if the battery is installed with the

wrong polarity.

CAUTION: Danger of explosion if the battery is replaced

incorrectly.

Replace only with the same type battery.

3.) Insert the battery holder into the battery slot.

NOTE: Use only the size and type of battery specified. If the device is

not to be used for a long period of time, remove the battery to prevent damage

or injury from possible battery leakage. Do not try to recharge the battery, it is

not intended to be recharged and doing so may cause the battery to rupture or

leak. Battery shall not be exposed to excessive heat such as direct sunlight,

fire or the like. Only use a well-known brand of cell battery to ensure the longest

life and best performance.

This unit is supplied with an AC adaptor with the output DC 12V 1500mA; take

the following steps to connect the adaptor.

1. Unwind the power cord of the AC adaptor to its full length.

2. Firmly insert the DC plug of the AC adaptor to the DC socket on the rear of

the unit.

3. Plug the AC adaptor to the AC outlet (100-240V ~ 50/60 Hz). Connecting

this system to any other power source may cause damage to the system.

For sufficient ventilation, keep other objects at least 10cm away from the unit.

789

1 2 4

5 66

1 2

PLAY/ PAUSE button

Application Not Installed

This accessory requires an application

you do not have installed. Would

you like to install it from the App store?

YESNO

4. Main interface

5. Sources Interface

Touch the mode icons to enter the iPod, Video, Aux-in or FM Radio mode Interface

Touch the Sources icon to enter the Sources Interface

Touch the weather update button to update the weather display

(Wi-Fi connection dependant)

Date display synchronous with （

iPhone/iTouch）

Time display (synchronous with

iPhone/iTouch)

Weather display

Weather update button

Main interface button

Sourcing button

Slideshow button

Alarm setting button

Information button

Home Sources AlarmSlideshow Settings

November 2, 2010 Tue

ShenZhen

iPod playing mode

Line In

Video Video mode

Set Line-In as speaker source

Play Movies on app folder

Play iPod Music

FM Radio

Turn on Radio on speaker

Aux-in mode

FM radio mode

Sources

Home Sources AlarmSlideshow Settings

5.1. iPod mode

5.2. Video Mode

Touch the iPod mode icon to enter the iPod playing interface.

Before entering video mode, you should sync the required video file to the

App via iTunes. Connect your iPod Touch or iPhone to your computer,

open iTunes, click on your iPod Touch or iPhone device, click the Mitone

App and then click “Add” to add the video files and click “sync” to

synchronize them to your iPod Touch or iPhone.

To select music file

Play/Pause music

Next music

Previous music

Return to sourcing interface

Music Player

Sources

Christmas in My Heart

Sarah Connor

00:00:00

The Mode button LED indication will change to blue. Select the music file.

and then click the “ ” button to play the selected music track. Click the “ ”

button to play the previous music track, and click “ ” to play the next music track.

Touch the Video mode icon to enter the Video playing interface.

Select and click the video file name to play the selected video.

Click line in mode to enter the line in interface.

Connect an external audio device to the speaker by the supplied audio cable.

Adjust the volume level on your audio device and on your speaker to get the

best sound effect. The volume level can now be controlled through the main

unit. Operate all other functions on the auxiliary device as usual.

5.3. Aux-In mode

Home Sources AlarmSlideshow Settings

Videos

ESUG.mp4

JDVZ.mp4

NGQT.mp4

NQIF.mp4

UWSI.mp4

Return to sourcing interface

Update the movie list

Return to sourcing interface

Line In

Sources

Line IN

5.4. FM Radio mode

Click FM Radio to enter FM radio interface.

Click “Bookmark” to save the radio channel to the Channel List. Input the radio

channel name and click “Save”. Click the Edit icon to edit or delete channels from

the Channel List. Click on the channel title to edit. Click on the red “Θ” icon to

enable the delete option and click “Delete” to delete. Click “Done” to confirm

the changes

Click the “ ”,“ ” Search buttons to search radio channels manually,

click “ ”, “ ” to search for radio channels automatically. Click the “radio

channel list” icon to enter the channel list interface.

Channel List

Bookmark 88.20MHz

FM Radio Done

Return to FM Radio interface

Edit/Done Mode

To bookmark the radio station

6. Slideshow Photos

7. Alarm mode

In the Main Interface click the “Alarm” icon to enter the alarm interface.

In the Main Interface click the Slideshow icon to enter the Slideshow interface.

Click “Select Photos” to enter the Images interface. Click the “+” button to

browse the iPod Photo Album. Click the desired photo to enter the Saved

Photos folder and click the photo again to save the photo to the Images

interface. Click on the required photos to add them to the Slideshow.

Click the Slideshow icon to return to the Slideshow interface. Click “Start”

to begin the slideshow of your selected photos.

Home Sources AlarmSlideshow Settings

Select Photos

Start

Select Photos

Start to Slideshow Photos

1:59 AM

Alarm

Edit

Home Sources AlarmSlideshow Settings

Edit/Done Mode

Add Alarm

Alarm on/off

Click the add alarm “+” button to enter the “Add Alarm” interface.

Click the blue “>” button in the “Sound” field to choose alarm source (iPod

music, one of six nature sounds, FM Radio or Buzzer). Click the weekdays

you require the Alarm to operate (the icon will be lit once chosen). Drag the

snooze control slider to set the snooze time between off and 30 minutes.

Scroll the time wheel and click the required AM/PM, Hours and Minutes to

set the alarm time. Click the “save” button to return to the alarm interface.

Click the “on/off” button to set the alarm ON. Click the Edit button to edit

or delete alarms from the Alarm Interface. Click on the alarm title to edit.

Click on the red “Θ” icon to enable the delete option and click “Delete” to

confirm. Click “Done” to confirm the changes.

Important Notes: The Music System must be in Apps mode with the iPod

Touch or iPhone connected in order for the alarm to operate. The volume

of the selected alarm source is determined by the volume control setting

of the Music System. Please ensure you have set the volume to a level

which will allow you to hear the alarm.

Alarm mode setting(iPod music, 6 natural

music, FM, Buzzer)

Add Alarm

Buzzer

Alarm Save

Alarm working date setting, the icon of

the date will be light once chosen.

Snooze time setting. Default setting is

5minutes, you can choose the time freely.

Alarm time setting

CARE AND MAINTENANCE

8. Setting interface

Click “Settings” to enter Setting interface.

Click the “location” button and input the name of the largest city in your

area. Click “ ” to set the temperature to Centigrade or Fahrenheit.

Click “Sleep” to set the sleep or nap time. Click “turn the speaker

offer now” to turn the speaker OFF immediately. Click “Help” to enter

the help file where you can see instructions regarding the App.

Click “About” to see information regarding the App.

1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.

2. Keep your unit away from heating appliances and sources of electrical noise

such as fluorescent lamps or motors.

3. For better Clock Display clarity, avoid operating the unit under direct sunlight or

in strong room illumination.

4. Unplug the unit from the electrical power outlet immediately in case of malfunction.

Note: The accuracy of the Weather Station information is dependent on the

selection of the closest major city in your area in the weather location setting.

Weather station information and updates is also dependant on a stable

Wi-Fi connection.

City name setting ( Setting the city

which you want to search the weather)

Settings

Location

Temperature

Help

About

Not set yet

Setting the temperature to Centigrade

or Fahrenheit

help file

about file

Sleep

About

Power

Weather

off

Turn Speaker Off Now

Setting the time to sleep

Turn off the speaker right now

Home Sources AlarmSlideshow Settings

TROUBLESHOOTING GUIDE

Symptom Possible Problem Solution

CLEANING THE UNIT

If you experience any difficulties in operating this unit, please check the

following chart to see if you can fix it before consulting a servicing professional.

The unit does

not respond

(no power).

iPod does not

respond to the

speaker system.

Plug the AC adaptor into a

wall outlet and plug the

connector into the supply

jack on the unit.

-AC Adaptor is not

plugged into a wall outlet

-The connector is not

plugged into the power

supply jack on the back

of the unit.

Wall outlet is not

functioning.

iPod is not installed

properly.

Remove your iPod from the

dock and check for

obstruction on the

connectors and on your

iPod. Then reseat it on

the dock.

Plug another device into the

same outlet to confirm the

outlet is working.

CAUTION: Never allow any water or other liquids to get inside the unit

while cleaning.

To prevent fire or shock hazard, disconnect your unit from the AC power

source before cleaning.

The finish on the unit may be cleaned with a dust cloth and cared for as

other furniture, Use caution when cleaning and wiping the plastic parts.

If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use

any wax or polish sprays on the cabinet.

If the front panel becomes dirty or smudged with fingerprints it may be

cleaned with a soft cloth slightly dampened with a mild soap and water

solution. Never use abrasive cloths or polishes as these will damage the

finish of your unit.

FM receiving

weak

Sound is

distorted.

Unit gets warm

after extended

play at high

volume.

FM antenna wire is not

fully extended.

Extend or rotate the wire

antenna for best reception.

Please make sure that your

iPod is working properly

before docking into the unit.

Please refer to your iPod

manual for info on resetting

the iPod.

Please make sure your

iPod is working properly

before docking into the unit.

Please refer to your iPod

manual for details on

resetting.

Your iPod is locked up.

iPod is locked up/ frozen.

iPod battery has problem.

Volume level is set too

high.

Sound source is distorted.

This is normal.

Decrease the volume.

If the iPod original sound

source is of poor quality,

distortion and noise are

easily noticed with

high-power speakers.

If you are using an external

sound source like older

generation of iPod, try

reducing the output volume

on the device itself. Also

try turning bass boost OFF.

Turn the unit off for a period

of time or lower volume.

123456

87 9 10 11 12 13

1514 16 17 18 19 20

Especificaciones del producto

Marca:	MiTone
Categoría:	radio reloj
Modelo:	MITSP8
Color del producto:	Wit
Peso.:	70 g
Ancho:	63.75 mm
Profundidad:	5.07 mm
Altura:	17.27 mm
Capacidad del acumulador/batería:	1500 mAh
Altavoces incorporados:	Nee
Cantidad por paquete:	1 stuk(s)
Compatibilidad de marca:	Apple
Método de uso:	Bag, Hand (carrying), Pocket (carrying)
Batería integrada:	Ja
Compatibilidad:	iPhone 4s / 4
Tipo de caso:	Hoes
Tamaño máximo de pantalla:	3.5 "