MoFi SourcePoint 10 Manual de Usario

MoFi Vocero SourcePoint 10

Lee a continuación 📖 el manual en español para MoFi SourcePoint 10 (10 páginas) en la categoría Vocero. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/10
My goal for the SourcePoint 10 was to blend long-standing
technologies that I am known for with new twists and
concepts that further improve performance. Throughout my
career concentric drivers have consistently delivered what I
wish to hear when reproducing music. My typical approach
has been to use a three-way design. The SourcePoint10 is
the rst pure two-way concentric that I have designed in
over 20 years.
This required a newly developed driver with a large 10-inch
cone to achieve a wide frequency response with maximum
linearity and low distortion. Each part of the driver from
the twin-drive neodymium magnet structure to the paper
pulp mixture, was carefully selected through a two-year
development period and I am proud of the performance this
speaker achieves.
Please follow the setup guidelines outlined in this manual,
and then feel free to experiment to optimize your listening
experience. I hope you will enjoy listening to it as much as I
have enjoyed designing it.
Best wishes,
Andrew Jones
Chief Loudspeaker Designer, MoFi Electronics
Thank you for your purchase
of the SourcePoint 10.
General Safety
and Installation
Be sure to connect the speakers according to the instruc-
tions in this manual.
Any time you directly handle the speakers, do not place
your hand or ngers on the driver cone.
Do not place the speakers in areas that may be in direct
sunlight; have high humidity; are too hot or cold; or that
block ventilation openings.
Do not place the speakers near heat sources such as ra-
diators, valves, stoves, or other heat-emitting apparatus
(including ampliers).
To prevent overload, avoid playing the speakers at
extreme volume levels for extended time periods, partic-
ularly if left unattended.
Continuous high volume may also cause severe damage
to your hearing.
Clean the speakers with soft, smooth cloth or with a dust
brush. Do not use scouring agents, alcohol, benzene,
furniture polish, or other agents.
Do not install he speakers in a closed rack or in a closed
cupboard.
Do not install he speakers in a closed rack or in a closed
cupboard.
Install the speakers on a level surface.
Do not place on furniture are prone to vibration.
If the speakers are placed on a piece of furniture, place
an anti-slip pad or mat under each speaker.
Avoid placing anything on top of the speakers, especially
products with rubber feet, which may damage the nish.
WARNING: If you mount the speakers on stands, ensure
they are stable to avoid the possibility of tipping over
and causing potential damage or injury. Stability on
carpeted surfaces can be increased by using spikes; do
not use spikes on smooth hard oors. Avoid contact with
the spike tips, which can be very sharp.

Especificaciones del producto

Marca: MoFi
Categoría: Vocero
Modelo: SourcePoint 10

¿Necesitas ayuda?

Si necesitas ayuda con MoFi SourcePoint 10 haz una pregunta a continuación y otros usuarios te responderán




Vocero MoFi Manuales

Vocero Manuales

Últimos Vocero Manuales