Motorola MTIBM042611 Manual de Usario

Lee a continuación 📖 el manual en español para Motorola MTIBM042611 (3 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
It is recommended to install the network connector
cap for exterior installations
The DC12V power supply is not necessary when the
camera is connected directly to a PoE device.
Connecting the network cable
3. Product Overview
CAMERA
CD
QUICK GUIDE
3 PLASTIC SCREW PLUGS
NETWORK CONNECTION
3 Tapping screws
PA 4X25
1Fixing ring 3Network cable
2Mounting base 4Power cable
IP BULLET CAMERA
IP BULLET VARIFOCAL CAMERA
CAMERA
QUICK GUIDE 3 Tapping screws PA 4X25
1 PWM 3X5MACHINE SCREW
3 PLASTIC
SCREW PLUGS
DRILLING
TEMPLATE
RUBBER PLUG
CD
1. Remove the connector cap by unscrewing it.
2. Run a network cable through the two caps parts and
install RJ45 connector to cable and connect both
cables together .
3. Screw together the cap parts and then screw cap to
the camera network connector cable .
4. Installation
Please make sure that the wall or ceiling is strong
enough to withstand 3 times the weight of the camera.
Please install and use the camera in the dry
environment.
1. Drill the screw holes and the cable hole on the mounting
surface using the available drill template.
2. Install rubber plug for exterior installations.
3. Route the cables through the cable hole and screw
in place base to mounting surface.
RUBBER PLUG
MOUNTING BASE
IP camerabullet
Quick Guide
IP varifocal camerabullet
Quick Guide
Please, read carefully these instructions before
operating your camera and save this as reference.
All examples and images used in this guide are only
for reference.
The content of this guide is subject to changes
without previous notice.
1. Precautions
If the product does not work properly, please contact
your dealer or the nearest service center. Never
attempt to disassemble the camera yourself. Your
warranty will be voided if any problems are caused
by unauthorized repair or maintenance.
Handle with care and prevent dropping the camera.
When the product is mounted on a wall or ceiling,
ensure that the device is properly firmly fixed.
Prevent touching the lens of the camera.
If cleaning is necessary, please use a clean cloth to
wipe it gently. If the device will not be used for a long
time, please cover the lens cap to protect the device
from dust.
Prevent aiming the camera directly to the sun or to
very bright environments.
Do not place the camera in extrem hot or coldely
environments (operating temperature is -20˚C~5C),
dusty or damp locations.
Para evitar exceso de calentamiento To avoid increase
in heat of product, good ventilation is required.
2. Contents
NOTE: IF YOUR CAMERA IS NOT VARIFOCAL OR IS
MOTORIZED, PLEASE SKIP STEPS 5, 6, 7.
4. Before adjusting the bracket, preview the image of the
of the camera on a monitor and then loosen the fixed ring
or screws to adjust the tikt or pan angle of the camera.
5. Loosen the the top screw on the sun protector and
slide back the protector.
6. Focus and zoom adjustment. Remove the lens cover
by unscrewing it and then adjust the focus and zoom by
turning the screws until the best image is achieved.
Tighten these two screws and replace back the lens cover.
7. Slide forward he solar protector and tighten screw.
Fixing ring
Sun protector
Lens cover
Zoom
Focus
2. The system will automatically detect all IP cameras
connected in your network.
3. Select the camera to add and click on the Add
button.
Input the IP address or domain name (click in the
IP address column to pop up the domain name input
window, input the domain name of the camera in the
window and then click “OK” button), port, username
and password of the camera and then select the
protocol. Click “Test” to test the eectiveness of the
input information and then click “Add” button (you
can input the camera’s information or above such as
IP address, username and password before clicking
“Add” button).
5. Connecting your camera
1. In your DVR/NVR device click on Add Camera.
You can click on to edit the camera’s IP address,
username and password. The factory default username
is and the password for the cameras is .admin 123456
You can also Add a camera to your system by doing
it manually.
Motorola Limited Warranty
This Motorola brand Product is produced under license by MDX
ELECTRONICS, LLC. Subject to the exclusions below, MDX
ELECTRONICS warrants that this Motorola brand product
("Product") will remain free from defects in materials and
workmanship under normal consumer usage for year . This 2 s
Warranty is your exclusive warranty. This Warranty extends only
to the first consumer purchaser and is not transferable. MDX
ELECTRONICS at no charge repair or replace any Product will
that qualifies under this Warranty. We may use functionally
equivalent reconditioned, refurbished, or new Products.
MOTOROLA and MDX ELECTRONICS are not responsible for
defects or damage that result from: (a) improper operation,
storage, misuse, abuse, maintenance, alteration, accident or
neglect, such as physical damage (cracks, scratches, etc.) to the
surface of the product or lens resulting from misuse; (b)
subjecting the Product or Accessory to abnormal usage or
conditions; (c) service provider alteration of the Product
including alteration of the Product’s firmware; or (d) other acts
which are not he fault of MOTOROLA or MDX ELECTRONICS, t
are excluded from coverage.
Any implied warranties, including without limitation the implied
warranties of merchantability and fitness for a particular
purpose, shall be limited to the duration of this limited warranty.
This warranty is provided in lieu of all other warranties, express
or implied. In no event shall MOTOROLA or MDX ELECTRONICS
be liable, whether in contract or tort (including negligence) for
damages in excess of the purchase price of the product, or for
any indirect, incidental, special or consequential damages of any
kind, or loss of revenue or profits, loss of business, loss of
information or other financial loss arising out in connection of or
with the ability or inability to use the product, to the full extent
these damages may be disclaimed by law.
Some jurisdictions do not allow the limitation or exclusion of
incidental or consequential damages, or limitation on the length
of an implied warranty, so the above limitations or exclusions
may not apply to you. This Warranty gives you specific legal
rights, and you may also have other rights that vary from one
jurisdiction to another.
To obtain support or need of information, doubts or questions,
please contact us at:
Tel: 01 800 801 6398 (México)
Tel: +011 52 55 9688-8814 (México, Latin America and Caribe)
WhatsApp: +52 155 7657 5586 (México, Latin America, Caribe)
Skype: soporte.motorolasecurity
Email: soporte@mdx-motorolasecurity.com
9:00AM - 5:00PM CST (Mon-Fri)
Manufactured, distributed or sold by MDX ELECTRONICS, LLC,
official licensee for this product. MOTOROLA and the Stylized M
Logo are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC. and are used under license. All other
trademarks are the property of their respective owners.
©20 Motorola Mobility LLC. All rights reserved.20
v4

Especificaciones del producto

Marca: Motorola
Categoría: Cámara de vigilancia
Modelo: MTIBM042611

¿Necesitas ayuda?

Si necesitas ayuda con Motorola MTIBM042611 haz una pregunta a continuación y otros usuarios te responderán




Cámara de vigilancia Motorola Manuales

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales