Motu UltraLite-mk5 Manual de Usario

Motu Equipo de DJ UltraLite-mk5

Lee a continuación 📖 el manual en español para Motu UltraLite-mk5 (64 páginas) en la categoría Equipo de DJ. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/64

™

UltraLite-mk5

1280 Massachusetts Avenue

Cambridge, MA 02138

Business voice: (617) 576-2760

Business fax: (617) 576-3609

Web site: www.motu.com

Tech support: www.motu.com/support

User Guide

SAFETY PRECAUTIONS AND ELECTRICAL REQUIREMENTS FOR THE UltraLite-mk5 (“PRODUCT”)

CAUTION! READ THIS SAFETY GUIDE BEFORE YOU BEGIN INSTALLATION OR OPERATION. FAILURE TO COMPLY WITH SAFETY

INSTRUCTIONS COULD RESULT IN BODILY INJURY OR EQUIPMENT DAMAGE.

HAZARDOUS VOLAGES: CONTACT MAY CAUSE ELECTRIC SHOCK OR BURN. TURN OFF UNIT BEFORE SERVICING.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR OTHER MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

IMPORTANT SAFEGUARDS

1. Read these instructions. All the safety and operating instructions should be read before operating the product.

2. Keep these instructions. These safety instructions and the product owner’s manual should be retained for future reference.

3. Heed all warnings. All warnings on the product and in the owner’s manual should be adhered to.

4. Follow all Instructions. All operating and use instructions should be followed.

5. Do not use the product near water.

6. Cleaning - Unplug the product from the computer and clean only with a dry cloth. Do not use liquid or aerosol cleaners.

7. Ventilation - Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Heat - Do not install the product near any heat sources such as radiators, heat registers, stoves, or another apparatus (including an amplifier) that produces heat.

9. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electrical shock.

10. Power supply cord - Protect the product power supply cord from being walked on or pinched by items placed upon or against them.

11. Power switch - Install the product so that the power switch can be accessed and operated at all times.

12. Disconnect - The main power supply plug is considered to be the disconnect device for the product and shall remain readily operable.

13. Accessories - Only use attachments/accessories specified by the manufacturer.

14. Surge protection - Unplug the product during lightning storms or when unused for long periods of time.

15. Servicing - Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such as when a power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the product, the product has been exposed to rain or moisture, does not operate normally, or has been dropped.

16. Power Sources - Refer to the manufacturer’s operating instructions for power requirements.

17. Installation - Do not install the product in an unventilated rack, or directly above heat-producing equipment such as power amplifiers. Observe the maximum ambient operating temperature listed

below.

18. Power amplifiers- Never attach audio power amplifier outputs directly to any of the unit’s connectors.

19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

20. Safety Check - Upon completion of any service or repairs to this MOTU product, ask the service technician to perform safety checks to determine that the product is in safe operating conditions.

ENVIRONMENT, HEAT AND VENTILATION

Operating Temperature: 10°C to 40°C (50°F to 104°). The product should be situated away from heat sources or other equipment that produces heat. When installing the product in a rack or any other

location, be sure there is adequate space around the product to ensure proper ventilation. Improper ventilation will cause overheating and can damage the unit.

TO REDUCE THE RISK OF ELECTRICAL SHOCK OR FIRE

Do not handle the power cord with wet hands. Do not pull on the cord of the power supply when disconnecting it from an AC wall outlet.

Grasp it by the power supply unit. Do not expose this apparatus to rain or moisture. Do not place objects containing liquids on it.

DC INPUT

10 - 24V DC • 1.0A max

Version 1.2

iii

Contents

Part 1: Getting Started

7Quick Start Guide

8A Typical UltraLite-mk5 Setup

9UltraLite-mk5 Front Panel

10 UltraLite-mk5 Rear Panel

11 About the UltraLite-mk5

15 Packing List and System Requirements

17 Software Installation

21 Hardware Installation

Part 2: Using the UltraLite-mk5

29 Front Panel Operation

31 CueMix 5

45 Working with Host Audio Software

Part 3: Appendices

53 Troubleshooting

55 Audio Specifications

57 Half-rack Mounting Kit

59 Half-rack Coupler Kit

61 Index

Especificaciones del producto

Marca:	Motu
Categoría:	Equipo de DJ
Modelo:	UltraLite-mk5
Color del producto:	Zwart
Peso.:	1200 g
Formato de audio soportado:	AAC, AC3, MP3, WMA
Tecnología de conectividad:	Bedraad
Tarjetas de memoria compatibles:	MMC, SD
Guía de inicio rápido:	Ja
Incluye adaptador de CA:	Ja
Número de puertos USB 2.0:	1
Número de puertos HDMI:	1
Compatibilidad con Mac:	Ja
Salida de vídeo compuesto:	1
Capacidad del disco duro:	1000 GB
Interfaz de disco duro:	SATA
Velocidad de rotación del disco duro:	7200 RPM
Vídeo de grupo de componentes (YPbPr/YCbCr):	1
Tamaño del disco duro:	3.5 "
Mando a distancia incluido:	Ja
CD ROM:	Ja
Cable de audio/vídeo:	Ja