Moxa AWK-3131A-US Manual de Usario

Moxa punto de acceso AWK-3131A-US

Lee a continuación 📖 el manual en español para Moxa AWK-3131A-US (7 páginas) en la categoría punto de acceso. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
www.moxa.com
1
AWK-3131A Series
Industrial IEEE 802.11a/b/g/n wireless AP/bridge/client
Features and Benefits
IEEE 802.11a/b/g/n AP/bridge/client support
Easy setup and deployment with AeroMag
Millisecond-level Client-based Turbo Roaming1
Complete redundancy with AeroLink Protection
Easy network setup with Network Address Translation (NAT)
Integrated antenna and power isolation
-40 to 75°C wide operating temperature range (-T models)
5 GHz DFS channel support
Certifications
Introduction
The AWK-3131A 3-in-1 industrial wireless AP/bridge/client meets the growing need for faster data transmission speeds by supporting IEEE
802.11n technology with a net data rate of up to 300 Mbps. The AWK-3131A is compliant with industrial standards and approvals covering
operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the power
supply, and the AWK-3131A can be powered via PoE to make deployment easier. The AWK-3131A can operate on either the 2.4 or 5 GHz bands
and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments. The Wireless add-on for the
MXview network management utility visualizes the AWK's invisible wireless connections to ensure wall-to-wall Wi-Fi connectivity.
Advanced 802.11n Industrial Wireless Solution
802.11a/b/g/n compliant AP/bridge/client for flexible deployment
Software optimized for long-distance wireless communication with up to 1 km line of sight and external high-gain antenna (available only on 5
GHz)
Supports 60 clients connected concurrently
DFS channel support allows a wider range of 5 GHz channel selection to avoid interference from existing wireless infrastructure
Advanced Wireless Technology
AeroMag supports error-free setup of your industrial applications’ fundamental WLAN settings
Seamless roaming with client-based Turbo Roaming1for < 150 ms roaming recovery time between APs (Client Mode)
Supports AeroLink Protection for creating a redundant wireless link (< 300 ms recovery time) between APs and their clients
Industrial Ruggedness
Integrated antenna and power isolation designed to provide 500 V insulation protection against external electrical interference
Hazardous location wireless communication with Class I Div. II and ATEX Zone 2 certifications
-40 to 75°C wide operating temperature models (-T) provided for smooth wireless communication in harsh environments
Wireless Network Management With MXview Wireless
Dynamic topology view shows the status of wireless links and connection changes at a glance
Visual, interactive roaming playback function to review the roaming history of clients
Detailed device information and performance indicator charts for individual AP and client devices
1. The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free
20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load.
Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual.
www.moxa.com
2
Specifications
WLAN Interface
WLAN Standards 802.11a/b/g/n
802.11i Wireless Security
Modulation Type DSSS
OFDM
MIMO-OFDM
Frequency Band for US (20 MHz operating channels) 2.412 to 2.462 GHz (11 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)2
5.500 to 5.700 GHz (11 channels)2
5.745 to 5.825 GHz (5 channels)
Frequency Band for EU (20 MHz operating channels) 2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)2
5.500 to 5.700 GHz (11 channels)2
Frequency Band for JP (20 MHz operating channels) 2.412 to 2.484 GHz (14 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)2
5.500 to 5.700 GHz (11 channels)2
Wireless Security WEP encryption (64-bit and 128-bit)
WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
WPA/WPA2-Personal
Transmission Rate 802.11b: 1 to 11 Mbps
802.11a/g: 6 to 54 Mbps
802.11n: 6.5 to 300 Mbps
Transmitter Power for 802.11a 23±1.5 dBm @ 6 to 24 Mbps
21±1.5 dBm @ 36 Mbps
20±1.5 dBm @ 48 Mbps
18±1.5 dBm @ 54 Mbps
Transmitter Power for 802.11n (5 GHz) 23±1.5 dBm @ MCS0/8 20 MHz
18±1.5 dBm @ MCS7/15 20 MHz
23±1.5 dBm @ MCS0/8 40 MHz
17±1.5 dBm @ MCS7/15 40 MHz
Transmitter Power for 802.11b 26±1.5 dBm @ 1 Mbps
26±1.5 dBm @ 2 Mbps
26±1.5 dBm @ 5.5 Mbps
25±1.5 dBm @ 11 Mbps
Transmitter Power for 802.11g 23±1.5 dBm @ 6 to 24 Mbps
21±1.5 dBm @ 36 Mbps
19±1.5 dBm @ 48 Mbps
18±1.5 dBm @ 54 Mbps
Transmitter Power for 802.11n (2.4 GHz) 23±1.5 dBm @ MCS0/8 20 MHz
18±1.5 dBm @ MCS7/15 20 MHz
23±1.5 dBm @ MCS0/8 40 MHz
17±1.5 dBm @ MCS7/15 40 MHz
Transmitter Power US EU JP
2.4 GHz 26 dBm 18 dBm 18 dBm
5 GHz (UNII-1) 23 dBm 21 dBm 21 dBm
5 GHz (UNII-2) 23 dBm 21 dBm 21 dBm
5 GHz (UNII-2e) 23 dBm 23 dBm 23 dBm
2. DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel.
However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
www.moxa.com
3
US EU JP
5 GHz (UNII-3) 23 dBm
Note: Based on regional regulations, the maximum transmission power allowed on
the UNII bands is restricted in the firmware, as indicated above.
Receiver Sensitivity for 802.11a (measured at 5.680
GHz)
Typ. -90 @ 6 Mbps
Typ. -88 @ 9 Mbps
Typ. -88 @ 12 Mbps
Typ. -85 @ 18 Mbps
Typ. -81 @ 24 Mbps
Typ. -78 @ 36 Mbps
Typ. -74 @ 48 Mbps
Typ. -72 @ 54 Mbps
Note: Due to a limitation in the receiver sensitivity performance for channels 153 and
161, it is recommended to avoid using these channels in your critical applications.
Receiver Sensitivity for 802.11n (5 GHz; measured at
5.680 GHz)
Typ. -69 dBm @ MCS7 20 MHz
Typ. -71 dBm @ MCS15 20 MHz
Typ. -63 dBm @ MCS7 40 MHz
Typ. -68 dBm @ MCS15 40 MHz
Note: Due to a limitation in the receiver sensitivity performance for channels 153 and
161, it is recommended to avoid using these channels in your critical applications.
Receiver Sensitivity for 802.11b (measured at 2.437
GHz)
Typ. -93 dBm @ 1 Mbps
Typ. -93 dBm @ 2 Mbps
Typ. -93 dBm @ 5.5 Mbps
Typ. -88 dBm @ 11 Mbps
Receiver Sensitivity for 802.11g (measured at 2.437
GHz)
Typ. -88 dBm @ 6 Mbps
Typ. -86 dBm @ 9 Mbps
Typ. -85 dBm @ 12 Mbps
Typ. -85 dBm @ 18 Mbps
Typ. -85 dBm @ 24 Mbps
Typ. -82 dBm @ 36 Mbps
Typ. -78 dBm @ 48 Mbps
Typ. -74 dBm @ 54 Mbps
Receiver Sensitivity for 802.11n (2.4 GHz; measured
at 2.437 GHz)
Typ. -70 dBm @ MCS7 20 MHz
Typ. -69 dBm @ MCS15 20 MHz
Typ. -67 dBm @ MCS7 40 MHz
Typ. -67 dBm @ MCS15 40 MHz
WLAN Operation Mode Access point, Client, Client-Router, Master, Slave, Sniffer
Antenna External, 2/2 dBi, Omni-directional
Antenna Connectors 2 RP-SMA female
Ethernet Interface
Standards IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3at for PoE
IEEE 802.1Q for VLAN Tagging
IEEE 802.1X for authentication
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
PoE Ports (10/100/1000BaseT(X), RJ45 connector) 1
Ethernet Software Features
Management DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3,
Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search Utility, MXview, MXview Wireless,
MXconfig
Routing Port forwarding, Static Route, NAT

Especificaciones del producto

Marca: Moxa
Categoría: punto de acceso
Modelo: AWK-3131A-US

¿Necesitas ayuda?

Si necesitas ayuda con Moxa AWK-3131A-US haz una pregunta a continuación y otros usuarios te responderán




punto de acceso Moxa Manuales

punto de acceso Manuales

Últimos punto de acceso Manuales