Moxa NPort 5210A Manual de Usario

Moxa servidor NPort 5210A

Lee a continuación 📖 el manual en español para Moxa NPort 5210A (4 páginas) en la categoría servidor. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

— 1— — 2 — — 3 —

NPort 5200A Series

Quick Installation Guide

First Edition, July 2010

1. Overview

NPort 5200A series device servers are compact, palm-sized data

communication devices that allow you to control RS-232 (NPort 5210A),

RS-422/485 (NPort 5230A), and RS-232/422/485 (NPort 5250A) serial

devices over a TCP/IP-based Ethernet.

Note: “-T” indicates an extended temperature model.

2. Package Checklist

Before installing the NPort 5200A series device server, verify that the

package contains the following items:

y 1 NPort 5200A serial device server

y Power Adaptor (NPort 5200A-T doesn't include this accessory)

y 4 stick-on pads

y Document & Software CD

y Quick Installation Guide

y Product Warranty Statement

Optional Accessory

y DK-35A: DIN-Rail Mounting Kit (35 mm)

Notify your sales representative if any of the above items are missing or

damaged.

3. Hardware Introduction

As shown in the following figures, NPort 5200A series device servers

have two male DB9 ports for transmitting RS-232 (NPort 5210A), or

RS-232/422/485 (NPort 5250A) serial data and have two 5-pin terminal

block ports for transmitting RS-422/485 (NPort 5230A).

Power input

RJ45 10/100M Ethernet port

Reset button

Rear Panel View

Top Panel View

DIN-Rail

screw hole

Wallmount

screw hole

Terminal Block

Stick-on pad

Male DB9 serial port

Front Panel View

NPort 5210A/5250A NPort 5230A

Reset Button—Press and hold the Reset button for 5 seconds to load

factory defaults: Use a pointed object, such as a straightened paper clip or

toothpick, to depress the reset button. This will cause the Ready LED to

blink on and off. The factory defaults will be loaded once the Ready LED

stops blinking (after about 5 seconds). At this point, release the reset

button.

LED Indicators—NPort 5200A’s top panel has four LED indicators,

which are described in the following table.

LED

Name

LED

Color LED Function

Steady on: Power is on and the NPort is booting up.

Red Blinking: Indicates an IP conflict, or DHCP or

BOOTP server is not responding properly.

Steady on: Power is on and the NPort is functioning

normally.

Green Blinking: The NPort has been located by the NPort

Administrator’s Location function.

Ready

Off Power is off, or a power error..

Orange 10 Mbps Ethernet connection.

Green 100 Mbps Ethernet connection.

Link

Off Ethernet cable is disconnected.

Orange Serial port is receiving data.

Green Serial port is transmitting data.

P1, P2

Off No data is being transmitted or received through the

serial port.

Adjustable pull high/low resistor and terminator for RS-422/485

Port 1 Port 2

Remove the NPort 5230A/5250A’s top

cover and you will find DIP switches to

adjust each serial port’s pull-high, pull-low,

and terminator. Do not use the 1 KΩ setting

with RS-232 mode, as doing so will

degrade the RS-232 signals and shorten the

communications range.

1 2 3

SW Pull-high resistor Pull-high resistor Terminator

ON 1 KΩ 1 K 120Ω Ω

OFF *150 KΩ *150 KΩ *---

*Default

P/N: 1802052000010

—4— —5 — — 6 —

4. Hardware Installation Information

STEP 1: After removing the NPort 5200A series device server from the

box, the first thing you should do is connect the power adaptor.

STEP 2: Connect the NPort 5200A series device server to a network. Use

a standard straight-through Ethernet cable to connect to a hub or switch.

When setting up or testing the NPort 5200A series device server, you

might find it convenient to connect directly to your computer’s Ethernet

STEP 3: Connect the NPort 5200A series device server’s serial port to a

serial device.

STEP 4: Placement options.

In addition to placing the NPort 5200A on a desktop or other horizontal

surface, you may also make use of the DIN-Rail or Wall Mount options,

as illustrated below.

5. Software Installation Information

To install NPort Administration Suite, insert the NPort Document &

Software CD into your computer’s CD-ROM drive. Once the NPort

Installation CD window opens, click on the Software folder, and then

follow the instructions on the screen.

To view detailed information about NPort Administration Suite, click

on the Documents folder, and then select “NPort 5200A Series User’s

Manual” to open the pdf version of the user’s guide.

6. Pin Assignments

Ethernet Port Pinouts

Pin Number Ethernet

1 Tx+

2 Tx-

3 Rx+

6 Rx-

NPort 5210A—DB9 male (RS-232) port pinouts

1 5

6 9

Pin Number RS-232

1 DCD

2 RxD

3 TxD

4 DTR

5 GND

6 DSR

7 RTS

8 CTS

9 ---

NPort 5230A—Terminal Block (RS-422/485) port pinouts

1 2 3 4 5

Number

RS-422/485

(4W)

RS-485

(2W)

1 TxD+(B) ---

2 TxD-(A) ---

3 RxD+(B) Data+(B)

4 RxD-(A) Data-(A)

5 GND GND

NPort 5250A—DB9 male (RS-232/422/485) port pinouts

1 5

6 9

Number

RS-232 RS-422/

485 (4W)

RS-485

(2W)

1 DCD TxD-(A) ---

2 RxD TxD+(B) ---

3 TxD RxD+(B) Data+(B)

4 DTR RxD-(A) Data-(A)

5 GND GND GND

6 DSR --- ---

7 RTS --- ---

8 CTS --- ---

9 --- --- ---

7. Specifications

Power Requirements

Power Input 12 to 48 VDC

Power Consumption 119 mA@12V, 65 mA@24V

Operating Temperature 0 to 60°C (32 to 140°F), for standard models

-40 to 75°C (-40 to 167°F), for -T models

Operating Humidity 5 to 95% RH

100 x 111 x 26 mm

(3.94 x 4.37 x 1.02 in)

Åwith ears Dimensions

77 x 111 x 26 mm

(3.03 x 4.37 x 1.02 in)

Åwithout ears

Serial Line Protection 15 KV ESD for serial port

Level 1 Surge, EN61000-4-5

Magnetic Isolation 1.5 KV for Ethernet

Power Line Protection Level 2 Burst (EFT), EN61000-4-4

Level 3 Surge, EN61000-4-5

Regulatory Approvals FCC Class A, CE Class A, UL, LVD

Click here for online support:

www.moxa.com/support

The Americas: +1-714-528-6777 (toll-free: 1-888-669-2872)

Europe: +49-89-3 70 03 99-0

Asia-Pacific: +886-2-8919-1230

China: +86-21-5258-9955 (toll-free: 800-820-5036)

Reproduction without permission is prohibited.

Especificaciones del producto

Marca:	Moxa
Categoría:	servidor
Modelo:	NPort 5210A
Colocación del dispositivo:	Aanrecht
Tipo de operación:	Draaiknop
Color del producto:	Zwart
Pantalla incorporada:	Nee
Peso.:	16500 g
Ancho:	445 mm
Profundidad:	510 mm
Altura:	630 mm
Tipo de enchufe:	Type G
Color de la puerta:	Zwart
Longitud del cable:	1.8 m
Bloqueo infantil:	Nee
Nivel de ruido:	41 dB
Clase-de-eficiencia-energética:	E
Consumo-anual-de-energía:	99 kWu
Peso del embalaje:	18700 g
Ancho del embalaje:	465 mm
Empaquetadura en profundidad:	542 mm
Altura del embalaje:	705 mm
Capacidad neta del congelador:	0 l
Dirección de apertura de puerta intercambiable.:	Ja
Adecuado para ajuste de panel:	Ja
Capacidad neta del frigorífico:	66 l
Frigorífico de capacidad bruta:	66 l
Iluminación interior del frigorífico:	Ja
Número de estantes en el refrigerador.:	2
Capacidad neta total:	66 l
Alarma de temperatura:	Nee
Sin sistema Frost:	Nee
Descongelación automática (frigorífico):	Nee
Material del estante:	Metaal
Función súper genial:	Nee
Al área del compartimento:	Nee
Alarma de puerta abierta:	Nee
Función incorporada:	Nee
Temperatura mínima de funcionamiento:	16 °C
Temperatura máxima (en funcionamiento):	43 °C
Clase-climática:	SN-T
Clase de emisión de ruido:	C
Tipo de fuente de energía:	AC
Pies ajustables:	Ja
Nombre del color:	Zwart
Posicionamiento en el mercado:	Tafelblad
Ubicación de la exhibición:	Binnenin
Recubrimiento antibacteriano:	Nee
País de origen:	China
Sistema multivía aérea:	Nee
Profundidad sin mango:	510 mm
Ancho con la puerta abierta:	858 mm
Peso del paquete:	18.7 kg
Dimensiones del paquete (AnxPrxAl):	465 x 542 x 705 mm
Código aduanero de producto (TARIC):	8418215190
Código arancelario comercial del Reino Unido:	8418215190
Termostato ajustable:	Nee
Dimensiones interiores (An x Pr x Al):	367 x 418 x 330 mm
Estantes ajustables:	Ja
Dispensador de agua:	Nee
Compartimento antibacteriano:	Nee
Peso bruto:	18700 g
Peso neto:	16500 g
Cantidad por paquete:	1 stuk(s)
Por ángulo de apertura:	210 °
Número de clasificación de control de exportaciones (ECCN):	8418215190
Dimensiones (Ancho x Fondo x Alto):	445 x 510 x 630 mm
voltaje-de-entrada-de-CA:	230 V
Frecuencia-de-entrada-de-CA:	50 Hz
Temperatura de funcionamiento (TT):	0 - 8 °C
Escala de eficiencia energética:	A tot G
EAN:	5056233834283
Peso del embalaje de poliestireno expandido (EPS):	350 g
Peso del embalaje de papel:	1800 g
Peso de los envases de plástico.:	118.71 g
Peso de los envases metálicos.:	0 g
Peso del embalaje de madera.:	0 g