Supermicro SuperServer 2028U-TNRT+ Manual de Usario

Supermicro servidor SuperServer 2028U-TNRT+

Lee a continuación 📖 el manual en español para Supermicro SuperServer 2028U-TNRT+ (25 páginas) en la categoría servidor. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/25
Information for Lot 9 of d )ErP (Eco esign
This addendum addresses E European Union (EU) codesign requirements for servers and storage
products addendum product. All and ratings within this data are in reference only Supermicro to the (s) in
the manual. The below information conforms ommission to requirements laid down Cin Annex II of the
R . egulation 2019/424
3(1)(a): e See Section 1.1 of th system manual for the product type.
3(1)(b): See the title page and preface of the system manual for the trademark and
manufacturer’s address.
3(1)(c): (s). See the title page of the system manual for product model number
3(1)(d): . See the serial number on the physical system to determine the year of manufacture
3(1)(e-j): PSU E actor V ) (F fficiency and Power F alue (Table rom 80 Plus report)
PSU Model #: - - PWS 1K02A 1R
Watts: 1000W PSU E fficiency
P Fower actor
% of R Lated oad
%10
20 50 100 % % %
50 %
Single -Output (AC DC)
91.88%
94.24%
96.33%
93.93%
0.99
E P System (EUT) fficiency in I Sdle tate ower (Table)
Representative
Configurations
Measured Idle State
Power (W)
Calculated Idle Power
Allowance (W)
High-End Performance
Configuration
331.9
439.85
Typical Configuration
213.6
319.28
Low-End Performance
Configuration
205.2
262.15
System E P(EUT) fficiency in A Sctive tate ower (Table)
Representative
Configurations
E Score fficiency
Minimum A Sctive tate
Efficiency for 2-Socket
S erver
High-End Performance
Configuration
26.0
Typical Configuration
25.8
9.5
Low Performance -End
Configuration
20.0
3(1)( is k): The operating condition class A2.
Dry °Cbulb temp
Humidity range, non-condensing
Operati
ng
conditi
Allowab
le
range
Reco
m
mend
Allowable range
Recommended
range
Max
dew
point
C)
Maximu
m
rate
of
change
A1
15 32-
18 27-
12 °C P Dew oint (DP)
and
8 % relative
humidity (RH) to
17 80°C DP and % RH
9 °C DP to
15 °C DP
and
60 %
17
5/20
A2
10 35-
18 27-
12 °C 8 % DP and RH
to
21 80 °C DP and %
Same as A1
21
5/20
A3
5-40
18 27-
12 °C 8 % DP and RH
to
24 85 °C DP and %
Same as A1
24
5/20
A4
5-45
18 27-
12 °C 8 % DP and RH
to
24 90 °C DP and %
Same as A1
24
5/20
3(1)(l): The idle state power at the higher boundary temperature of the operating conditions
class is 331.9W.
3(1)( is 26m): The active state efficiency and performance .0.
3(1)(n): There are two methods by which a user can securely delete data from this system. The
user performing secure data deletion should be an IT professional.
The first is with a Unified Extensible Firmware Interface (UEFI) shell utility. This utility
works on X10/X11/H11/H12/M11 motherboard series with onboard SATA/NVMe devices.
Any user may access and download this utility through following link:
https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wftp/utility/Lot9_Secure
_Data_Deletion_Utility/
Download the shell utility package and extract it to a USB flash drive, then plug the drive
into the server for which secure data deletion is necessary. Then turn the system on.
Navigate to the BIOS setup menu, then place the server system into the UEFI shell
environment. Follow the instructions in the README file to invoke the utility and
complete the deletion.
The second method is through the secure data deletion tool provided by the original
manufacturer of the hard drive. This should be used in a scenario where the shell utility
is not applicable. Each manufacturer should have the tool available on their website. If
needed, please look on the hard drive label for the name of the manufacturer and model
information.
3(1)(o): List of recommended combinations of blade servers with chassis: N/A.
3(1)(p): : List of all current SKUs within this product family
SKUs
SYS 2028U- - E1C
Models
SYS 2028U E1CNR4T+- -
SYS 2028U- - E1CNRT+
3(3)(a): There is no use of cobalt in batteries in this product.
The indicative weight range of eodymium in the HDD is if manufactured by Western n 0.0
Digital, and is 25 grams if manufactured by Seagate.between 5-
3(3)(b): Please see the disassembly instructions on the next page.

Especificaciones del producto

Marca: Supermicro
Categoría: servidor
Modelo: SuperServer 2028U-TNRT+

¿Necesitas ayuda?

Si necesitas ayuda con Supermicro SuperServer 2028U-TNRT+ haz una pregunta a continuación y otros usuarios te responderán




servidor Supermicro Manuales

servidor Manuales

Últimos servidor Manuales