Moxa Nport 5610-8-DTL Manual de Usario

Moxa servidor Nport 5610-8-DTL

Lee a continuación 📖 el manual en español para Moxa Nport 5610-8-DTL (2 páginas) en la categoría servidor. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

– – – – – – 1 2 3

P/N: 1802056000010

NPort 5600-8- DTL

Quick Installation Guide

First Edition, March 2011

Overview

The NPort 5600-8- DTL series includes the following models:

• NPort 5610-8-DTL: 8 ports, RS-232, 0 to 60°C

• NPort 5650-8-DTL: 8 ports, RS-232/422/485, 0 to 60°C

• NPort 5650I-8-DTL: 8 ports, RS-232/422/485, 0 to 60°C,

2KV optical isolation.

• NPort 5610-8- -DTL T: - - 8 ports, RS 232, 40 to 75°C

• NPort 5650-8- -DTL T: 8 ports, RS-232/422/485, - 40 to 75°C

• NPort 5650I-8- -DTL T: -8 ports, RS 232/422/485, 2KV

optical isolation, -40 to 75°C

Package Checklist

The NPort 5600-8- DTL package should contain the following items:

• NPort 5600-8-DTL device server

• Wall mounting and DIN- Rail kits

• Stick- on pads

• Documentation and software CD

• Quick installation guide (printed)

• Warranty card

Optional Accessories*

• DK-35A: DIN-R ail mounting kit (35 mm)

Note: Please notify your sales representative if any of the above

items are missing or damaged.

*Optional Accessories can be ordered separately.

Hardware Introduction

Top and Rear Views

Front View

Reset Button

Use a pointed object to hold the reset button down for at least five

seconds to load the factory defaults. Release the reset button

when the Ready LED stops blinking.

LED Indicators

The LED indicators on the top panel are used to display the status

as follows:

Name

Color

Function

PWR

red

Power is on.

off

Power is off.

Ready green Steady: NPort is operational

Blinking: NPort is responding to NPort

Administrator “Locate” function or NPort is

resetting to factory default

off

Power is off or fault condition exists.

Fault

red

IP conflict or DHCP or BOOTP server did not

respond properly.

off

No fault condition detected.

Link

green

Steady: Network is connected no data is ;

being transmitted.

Blinking: ; Network is connected data is

being transmitted.

off Ethernet cable is disconnected or has a

short.

InUse

(P1 to

P8)

green

Serial port has been opened by server side

software.

off

Serial port is not currently opened by server

side software.

TX/RX

(P1 to

P8)

green (Tx)

Serial device is transmitting data.

orange (Rx)

Serial device is receiving data.

off

No data is flowing to or from the serial port.

Hardware Installation

STEP 1: After removing the NPort 5600-8- DTL from the box, place

it on a desktop or other horizontal surface. Connect the 12-48 VDC

power adaptor to the NPort 5600-8-DTL’s power input when using

an AC power source, or connect the NPort 5600-8-DTL’s terminal

block directly to a DC power source.

STEP 2: Use an Ethernet cable to connect the NPort 5600-8- DTL to

a network hub or switch. You can also connect directly to your

computer’s Ethernet port, which is convenient for initial

configuration or testing.

STEP 3: Connect the NPort 5600-8-DTL’s serial port to a serial

device.

Wall or Cabinet Mounting

The NPort 5600-8- DTL comes with two metal attachment plates to

allow installation on a wall or the inside of a cabinet. First, attach

the brackets to the back of the NPort with screws. Next, mount the

unit on a wall or cabinet with screws. Screws should be less than

6.0 mm in head diameter, and less than 3.5 mm in shaft diameter.

– – – – – – 4 5 6

www.moxa.com/support

The Americas:

- - - - - - - +1 714 528 6777 (toll free: 1 888 669 2872)

Europe:

- - -0 +49 89 3 70 03 99

Asia-Pacific:

-2- - +886 8919 1230

China:

- - - - - - +86 21 5258 9955 (toll free: 800 820 5036)

 1 . A R 201 Moxa Inc , ll ights Reserved

DIN- Rail Mounting

DIN-Rail attachments can be purchased separately to attach the

product to a DIN DIN-Rail. The - Rail attachments should be

oriented with the metal springs on top.

Standard Attachment

DK-35A Attachment

Software Installation Information

To install NPort Administration Suite, insert the NPort

Document & Software CD into your PC’s CD-ROM drive. Locate

and run the setup program -and follow the on screen instructions.

The setup program will be named

Npadm_Setup_ _ _ .[ ]Version Build [ ]DateTime exe (e.g., “Npadm

_Setup_Ver1.16_Build_11021010.exe”). Refer to the NPort

5600-8- . DTL User’s Manual for more details

Pin Assignments

DB9 Male Ports

RS-232

RS- 422/

RS- -485 4W

RS- -485 2W

DCD

TxD- (A)

–

RxD

TxD+(B)

TxD

RxD+(B)

Data+(B)

DTR

RxD- (A)

Data- (A)

GND

DSR

–

RTS

–

CTS

–

Note: The NPort 5610-8-DTL supports RS-

232

only.

Specifications

LAN

Ethernet Ports: 10/100 Mbps (RJ45)

Protection: Built-in 1.5 KV magnetic isolation

Serial Interface

RS-232: NPort 5610-8- DTL

RS : -232/422/485 NPort 5650 , 5650I-8-DTL -8- DTL

Serial Ports: 8 (DB9- M connectors)

Isolation: 2 -8- ) KV isolation (NPort 5650I DTL

Serial Signals

RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422: Tx+, Tx- - , Rx+, Rx , GND

RS : - -485 (2 wire) Data+, Data- , GND

RS : - -485 (4 wire) Tx+, Tx- - , Rx+, Rx , GND

Serial Line Protection: 15 KV ESD for all signals

RS : -485 Data Direction ADDC™ (Automatic Data Direction

Control)

Serial Communication Parameters

Parity: None, Even, Odd, Space, Mark

Data Bits: 5, 6, 7, 8

Stop Bit(s): 1, 1.5, 2

Flow Control: RTS/CTS, DSR/DTR (for RS- 232 only), XON/XOFF

Transmission Speed: 50 bps to 921.6 Kbps

Power Requirements

Power Input: 12 to 48 VDC

Physical Characteristics

Operating Temperature:

Standard Models: 0 to 60°C (32 to 140°F)

Wide Temp. Models: -40 to 75°C ( 40 to 167°F)-

Storage Temperature: - -40 to 85°C ( 40 to 185°F)

Operating Humidity: 5 to 95% RH

Material: SECC sheet metal (0.8 mm)

Dimensions:

Without ears: 197 × 44 × 125 mm

With ears: 229 × 46 × 125 mm

With DIN-Rail kit: 197 × 52.8 × 125 mm

Certifications

Regulatory Approvals: FCC Class A, CE Class A, UL 60950-1,

LVD

Warranty: 5 years

Especificaciones del producto

Marca:	Moxa
Categoría:	servidor
Modelo:	Nport 5610-8-DTL
Color del producto:	Zwart
Ancho del embalaje:	1422.4 mm
Empaquetadura en profundidad:	101.6 mm
Altura del embalaje:	406.4 mm
Material de la carcasa:	Aluminium, Steel
Método de montaje:	Muur
Capacidad máxima de peso:	181 kg
Interfaz de montaje en panel:	400 x 400,600 x 200,600 x 400,600 x 600,800 x 400,800 x 600,1000 x 400,1000 x 600,1200 x 400,1600 x 600 mm
Compatibilidad de la interfaz de montaje (min):	400 x 400 mm
Compatibilidad de la interfaz de montaje (máx.):	1300 x 600 mm
Número de pantallas admitidas:	1
Tamaño máximo de pantalla:	100 "
Tamaño mínimo de pantalla:	70 "