MXR M195 Noise Clamp Manual de Usario

MXR No categorizado M195 Noise Clamp

Lee a continuación 📖 el manual en español para MXR M195 Noise Clamp (2 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

92503010856 REVA

M195 NOISE CLAMP

**LOOP BYPASS OPTION

Internal switch toggles between two bypass modes: Loop Bypass or Loop

On. When in Loop Bypass mode, the Send/Return effects loop is bypassed

when the pedal is off. In Loop On mode, the Send/Return effects loop is

active while the pedal is off. This can be accessed by removing the back

plate of the pedal.

Up - Loop On (factory setting)

Down - Loop Bypass

M195 NOISE CLAMP

DESCRIPTION

• Eliminates hiss and excess noise

from your effects chain

• A single Trigger knob sets the

volume threshold

• Capable of reducing noise up

to 26 dB

• Maintains riff denition at extreme

gain levels

POWER

The MXR Noise Clamp can be

(accessed by removing the bottom

plate of the pedal), a Dunlop

ECB003 AC adapter (ECB003E in

Europe) or a Dunlop DCB10 DC

Brick power supply.

CONTROLS

TRIGGER knob sets volume

threshold for when the Clamp

is active

SEND Front of FX loop

OUTPUT Goes to amp

RETURN End of effects loop

INPUT To guitar

FOOTSWITCH toggles effect

on/bypass

DIRECTIONS

• Run a cable from your guitar to

your Noise Clamp’s Input jack

and run another cable from the

Noise Clamp’s output jack to

your amplier.

• Run a cable from the Noise

Clamp’s Send jack to the input

of the rst pedal in your effects

chain. Run another cable from the

Noise Clamp’s Return jack to the

output jack of the last pedal in

your effects chain.

• Turn the effect on by depressing

the footswitch.

SPECIFICATIONS

IMPEDANCE

Input, Return 1 MΩ

Output, Send 1 kΩ

Max Level 10 dBV

Gate Attenuation -26 dBV

Signal to Noise 99.5 dBA

THD* 0.01%

Attack Time 3 ms

Release Time 10 ms

Bypass Buffered

Current Draw 13 mA

Power Supply DC 9 volts

0 dBV = 1 Vrms

* Measured at 1 kHz, -10 dBV

• The volume threshold is the

minimum level required to turn off

the noise clamp.

• Rotating the Trigger knob

clockwise raises the Noise

Clamp’s volume threshold for

hard clamping, while rotating

it counterclockwise lowers its

volume threshold to let through

quieter notes.

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: 1-707-745-2722 FAX: 1-707-745-2658

Especificaciones del producto

Marca:	MXR
Categoría:	No categorizado
Modelo:	M195 Noise Clamp
Color del producto:	Zwart
Peso.:	840 g
Ancho:	145 mm
Profundidad:	130 mm
Altura:	25 mm
Peso del embalaje:	1200 g
Manual de usuario:	Ja
Cables suministrados:	AC
Tarjetas de memoria compatibles:	SxS, SxS Pro, SxS-1
Certificados de sostenibilidad:	RoHS
Interno:	Nee
Sistemas operativos compatibles:	Windows computer with Thunderbolt 4 or Thunderbolt 3 ports\nWindows 11, 10
Cumplimiento de la sostenibilidad:	Ja
Tipo de conexión:	Thunderbolt 3
Ratio de transferencia:	40000 Mbit/s
Temperatura de funcionamiento (TT):	0 - 35 °C