Myson iV100 Manual de Usario

Myson Calefacción iV100

Lee a continuación 📖 el manual en español para Myson iV100 (2 páginas) en la categoría Calefacción. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

heatingthroughinnovation.

iVECTOR Control System Instructions

Getting Started

MYSON Eastern Avenue, Team Valley, Gateshead, Tyne & Wear NE11 0PG, UK

T: 0845 402 3434, F: 0191 491 7568, sales@myson.co.uk, www.myson.co.uk

4.0 Functions

Function

Easy Mode

Full Mode

Auto

Use (-) and (+) to set F1, F2, F3, A1, A2 and A3.

F1, F2 and F3 turn on Fan Speed 1, 2 and 3 respectively and give ‘Fan only’

operation with no temperature control.

A1, A2 and A3 turn on Fan Speed 1, 2 and 3 respectively, but only if the water

temperature is correct. (Please refer to your installation manual for full details).

Press (OK) to confirm the desired setting.

The iVECTOR will run indefinitely in Comfort Setting, providing automatic control

of the fan speed according to the difference between the set temperature and

the actual temperature.

The room temperature and the time are displayed at all times. Press (OK) to view

the set temperature.

The comfort temperature can be adjusted for this zone by using the (+) and (-)

keys. (The default setting is 21°C).

The iVECTOR, when set in AUTO, will follow your chosen programme. Refer

to section 12 of your installation guide for programme options and set-up.

The room temperature and the time are displayed at all times.

Press (OK) to view the actual temperature in either the comfort or set-back modes.

The iVECTOR will run indefinitely in Set-back.

The room temperature and the time are displayed constantly. Press (OK) to view

set temperature and actual time. To reduce or increase the temperature in this

zone press the (+) and (-) keys. (The default setting is 19°C).

Used to adjust the time and day.

Press (OK), then adjust the minute with (+) and (-) keys. Press (OK) to confirm,

then adjust the hour with (+) and (-) keys. Press (OK) to confirm.

Adjust the day by pressing the (+) and (-) keys. Press (OK) to confirm.

Turns iVECTOR on and off as required.

Provides choice of 9 pre-programmed options and 4 user defined programmes.

Please refer to section 12 in your installation guide for more information.

To access this setting set the control to the symbol . The logo will be

displayed. Adjust the period duration by pressing (+) and (-) keys. (In hours “H”

or, if greater than 24 hours then choose days “D”).

The counter will decrease to “00”. When the period is finished the thermostat

will return automatically to the AUTO setting.

To interrupt this period, adjust the duration to “no” with the minus (-) key.

The temperature applied during this time will be 7°C in winter and 30°C

in summer.

°°

24160 iVector Control Guide A5 21/10/2011 09:24 Page 1

iVECTOR Quick Start Guide iVECTOR Quick Start Guide

1.0 Introduction

The electronic control system on the iVECTOR provides a wide range of options that can

be selected according to system complexity and operating requirements.

Each iVECTOR leaves the factory with its controls set to the simplest level (easy mode).

This setting allows you to set the time, set the temperature via the comfort setting as well

as selecting your required fan speed.

3.0 Operation

Comfort Setting:

The iVECTOR will run indefinitely in this setting,

providing the water temperature is greater than

32°C heating, less than 15°C cooling. The fan

speed will automatically switch depending on

the difference between the room temperature

and the required set temperature.

Use the (+) and (-) keys to set your desired

temperature, followed by (OK) to confirm.

(Default setting is 21°C).

Setting Fixed Fan Speed Function:

Selecting one of these options provides fan only operation with no temperature control.

Using the (+) and (-) keys select F1, F2, or F3 for your desired fan speed (F1 being

the lowest fan speed and F3 the highest), followed by (OK) to confirm.

Setting Clock and Day Function:

Using the (<) and (>) keys tab across to to allow you to set the clock and/or day

function then press (OK) to change the time.

To set the minutes use the (+) and (-) keys, followed by (OK) to confirm.

To set the hours use the (+) and (-) keys, followed by (OK) to confirm.

To set the day use the (+) and (-) keys, followed by (OK) to confirm.

Power On/Off Function:

Using the (<) and (>) keys tab across to to allow you to use this function then press

(OK) to either turn the unit on or off.

Use the (<) and (>) keys to navigate the following

options, the function is highlighted when

a appears over the icon:

1. Heating symbol

2. Cooling symbol

3. Temperature symbol - when

this is displayed the current room

temperature is displayed

4. Room temperature

5. Fan speed symbol (fan blades will

rotate when active)

6. Day of week

7. Time

8. Comfort setting

9. Power (on/off)

10. Clock setting

11. Square indicator highlights

selected function.

2.0 Display

811 910

1 2 3 4 5 6 7

20.6 16:09

°C

24160 iVector Control Guide A5 21/10/2011 09:24 Page 3

Especificaciones del producto

Marca:	Myson
Categoría:	Calefacción
Modelo:	iV100
Color del producto:	Black, Red
Peso del embalaje:	7500 g
Ancho del embalaje:	735 mm
Empaquetadura en profundidad:	155 mm
Altura del embalaje:	405 mm
Actual:	3 A
Ajustable en altura:	Ja
Diagonal de la pantalla:	24 "
Resolución:	1920 x 1080 Pixels
Pantalla táctil:	Nee
Relación de aspecto original:	16:9
Ángulo de visión, horizontal:	170 °
Ángulo de visión, vertical:	160 °
Cables suministrados:	DC, DisplayPort, HDMI
Forma de pantalla:	Flat
Relación de contraste típica:	1000:1
Posicionamiento en el mercado:	Gamen
Número de puertos HDMI:	2
Puerto DVI:	Nee
Opción de montaje de bloqueo de cable:	Nee
Altavoces incorporados:	Nee
Consumo de energía (en espera):	- W
Salidas de auriculares:	1
Certificación:	CE
Velocidad máxima de actualización:	240 Hz
Soporte HDR:	Ja
Conexión para adaptador de red:	Ja
tipo HD:	Full HD
Entradas de audio:	Nee
hdmi:	Ja
Versión HDMI:	1.4/2.0
Tecnología de visualización:	LED
Tiempo de respuesta:	1 ms
Resoluciones de gráficos compatibles:	1920 x 1080 (HD 1080)
Montaje VESA:	Ja
Interfaz de montaje en panel:	100 x 100 mm
Brillo (típico):	350 cd/m²
Cámara integrada:	Nee
Profundidad (sin base):	30 mm
Altura (sin base):	330 mm
Ancho (sin base):	565 mm
Peso (sin base):	5000 g
Número de DisplayPorts:	1
Ancho del dispositivo (con soporte):	565 mm
Dispositivo de profundidad (con soporte):	130 mm
Altura del dispositivo (con soporte):	395 mm
Peso (con soporte):	6200 g
AMD FreeSync:	Ja
NVIDIA G-SYNC:	Ja
Número de puertos descendentes USB tipo A:	1
Tipo de panel:	TN
Auriculares apagados:	Ja
Área de imagen:	Mat
Concentrador USB incorporado:	Nee
Soporte incluido:	Ja
Soporte extraíble:	Ja
Tecnología sin parpadeos:	Ja
Tecnología de baja luz azul:	Ja
voltaje-de-entrada-de-CA:	100 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Consumo de energía (típico):	30 W
ajustes de inclinación:	Ja