Natec Kangaroo Dual Manual de Usario

Natec Base/estación de acoplamiento Kangaroo Dual

Lee a continuación 📖 el manual en español para Natec Kangaroo Dual (12 páginas) en la categoría Base/estación de acoplamiento. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/12
KANGAROO DUAL
User Manual
PRODUCT FEATURES:
• Supports USB 3.0 with UASP up to 6Gbps
• Supports 2.5’’&3.5’’SATA I/II/III HDD or SSD
• Supports capacity 2x4TB or above
• Supports One Touch Backup or Duplicate
(OTB need software to support with PC connected,
Clone no need software to support without PC.)
• LED indicates power and data access and progress
• Supports plug & play
• Powered AC 100~240V 50~60Hz 0.8A,
DC 12V2.5A
PACKAGE CONTENTS:
• HDD Docking Station
• USB 3.0 cable
• User’s manual
• Power adapter(12V/2.5A)
HARDWARE SETUP:
Note: Images are for example only. Actual positions of switches or connectors and pieces may vary
depending on the model.
SYSTEM REQUIREMENTS:
• USB 3.0 port or USB 2.0 port (if the device is
connected to an USB 2.0 port, the transfer speed will
down to 480Mbps)
• Windows 2000 / XP / Vista / Win7 / Win8 / Win10 /
Mac OS 10.X or above (No driver installation needed)
•
OTB function does not work under Windows 98 and Mac.
Thank you for purchasing our Natec Kangaroo Dual USB 3.0 HDD Docking Station.
For your safety and the satisfaction of using this product, please read this manual carefully before
installation.
USER MANUAL
Natec Kangaroo Dual USB 3.0
HDD Docking Station
HDD-A (Source)
HDD-B (Target)
CLONE button
EN PL
EN PL
Duplicator (CLONE) Mode
This section will introduce how to clone a hard disk without the need of a PC.
Note! The Duplicator Mode only works when the docking station is NOT connected to a PC via the USB
cable.
For clone function, you need two hard drives:
Source Disk: drive with the data you want to duplicate (clone).
Destination Disk: in which you want to store the data of the source disk.
Attention: The capacity of the destination disk should be equal or larger than the source disk.
Begin to duplicate
1. Make sure that those hard drives have no bad sectors. Bad sectors will cause unpredictable problems.
2. Put the Source Disk into the A bay, then put the Destination Disk into the B bay.
Please make sure that those hard drives are correctly and firmly connected to SATA connectors of the
docking station.
3. Connect the power adapter to the docking station and power outlet.
4. Press the power button to power up the docking station.
5. Wait at least 10s till the docking station is prepared.
Caution! All data on your Destination HD will be lost. If you have important data on the HD, please back up
the data before beginning the Clone operation.
6. Keep pressing the Clone button for 3 seconds to begin duplication.
During the Clone process, those LED indicators will flash to show the percentage of the progress.
Begin Clone process: four LED flash one by one.
One LED stays solid: 25%
Two LED stays solid: 50%
Three LED stays solid: 75%
Four LED stays solid: 100%
When the four LED all stay solid, the process of the Clone had been finished.
7. When the process of the Clone is finished, please press the power button on turn off the docking station.
Please take out those hard drives carefully because they may be very hot.
Note!
• Those hard drives may become hot during the Clone process.
• The Clone process may take various hours to finish.

Especificaciones del producto

Marca: Natec
Categoría: Base/estación de acoplamiento
Modelo: Kangaroo Dual

¿Necesitas ayuda?

Si necesitas ayuda con Natec Kangaroo Dual haz una pregunta a continuación y otros usuarios te responderán


Base/estación de acoplamiento Natec Manuales

Natec

Natec Kangaroo Dual Manual de Usario

29 Agosto 2024

Base/estación de acoplamiento Manuales

Últimos Base/estación de acoplamiento Manuales

Pyle

Pyle PHST92IBK Manual de Usario

20 Octubre 2024
Roberts

Roberts R100 Manual de Usario

19 Octubre 2024
Yamaha

Yamaha ISX-800 Manual de Usario

17 Octubre 2024
Polk

Polk BOOM Bit Manual de Usario

16 Octubre 2024
Vorago

Vorago KSP-600 Manual de Usario

8 Octubre 2024
IDance

IDance Mini Blaster 2L Manual de Usario

7 Octubre 2024
Pyle

Pyle PWPBT05BL Manual de Usario

5 Octubre 2024
Ewent

Ewent EW7018 Manual de Usario

5 Octubre 2024
Jam

Jam Splash Manual de Usario

5 Octubre 2024
Denver

Denver BTG-615 Manual de Usario

5 Octubre 2024