Nature2 Fusion inground Manual de Usario

Nature2 No categorizado Fusion inground

Lee a continuación 📖 el manual en español para Nature2 Fusion inground (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

IMPORTANT

Pool Owner, save this manual!

Builders, leave this manual with the pool owner!

We ask you to take the time to get familiar with this manual.

Thank you for purchasing a Nature2 Fusion Start-Up Cartridge. We believe the

more you know, the more enjoyable your family’s swimming experience will

be – and the more you will reduce the time, effort and cost of maintaining your

pool. Pool owners who switch from conventional chemical programs to the

Nature2 Fusion System* spend less time maintaining their pools. Every pool

has its own characteristics of water type, amount of sunlight, etc. Remember,

your Nature2 dealer can provide advice and service.

The Nature 2 start-up cartridge provides pH buffering and reduction of excess

metals from the pool water during the start-up phase. This is especially

beneficial to new and freshly refinished pools. This cartridge is not necessary

for the function of the Nature2 mineral sanitizing process, it is merely supplied

as a convenience for the pool start-up process.

NOTE This cartridge provides none of mineral sanitizing properties of the full Nature 2 mineral cartridge.

EQUIPMENT UNDER PRESSURE

• Always turn pump off prior to installing or changing Nature2 Fusion

cartridge. Your pump/filter system is operated under pressure and

the pressure must be released before you begin work. Please

see your pump/filter owner’s manual for further instructions.

PREVENT CHILD DROWNING

• Donot let anyone, especially small children, sit, step, lean or climb on

any equipment installed as part of your pool’s operational system. Locate

the components of your operational system at least three (3) feet from

the pool so children cannot use the equipment to access the pool and be

injured or drown.

Failure to heed the following can result in permanent injury, or drowning.

Safety Instructions - Important Information Please read prior to installation

!ATTENTION

Start-Up Cartridge

Installation Manual

Start-Up Cartridge for the Nature2® Fusion System

H0341000-

DIRECTIONS FOR USE:

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

NATURE2® FUSION COMPATIBILITY

Nature2 Fusion Systems* can be used with all types of pool chemical treatments available except biguanide products and copper based

algaecides.

Important: When converting from a biguanide or bromide treated pool to the Nature 2 Fusion System, the pool must be completely drained and

refilled. Then follow the Nature 2 Fusion cartridge start-up procedure below.

Start Up

•BeforestartingupanewNature 2 Fusion cartridge, clean debris and algae out of the pool and pool equipment.

Important:Donotinstallthenewcartridgeuntilthepoolwateriscleanandchemicallybalanced.

•BalancepoolwaterbeforeinstallingNature 2 Fusion cartridge.

- pH 7.4-7.6

- Calcium hardness 175-400 ppm

- Total alkalinity 80-120 ppm

Consult with your Nature 2Dealerforspecificwaterbalanceinstructions.

Balance the Water

To find out if your pool water is balanced:

• takeawatersampletoyourdealertobetestedregularly,or

• askyourdealertorecommendapooltestkitforwaterbalance.

Element: pH

Range: 7.4-7.6

Element: Calcium Hardness

Range: 175-400 ppm

Element: Total Alkalinity

Range: 80-120 ppm

If it’s too low:

If it’s too high:

If it’s too low:

If it’s too high:

If it’s too low:

If it’s too high:

The surface of your pool can become etched. How to fix: AddpHincreaser.

Metal parts in the pump and plumbing will corrode.

“Scale” forms on the surface of your pool. How to fix: AddpHdecreaser.

The water can become cloudy.

Equipment can become damaged.

Water is less stable. How to fix: Addcalciumhardnessincreaser.

In plaster pools, the calcium is taken out of the plaster,

causing the surface to deteriorate.

Rough, discolored deposits (“scale”) will form on the How to fix: Drainordilutethepoolwater.

pool surface and inside pool equipment. Consult your dealer.

It provides no buffer so that you constantly get fluctuating Use an alkalinity increaser.How to fix:

pH readings, which can damage equipment and pool surfaces.

White deposits (“scale”) form on the tile line. How to fix: Addacidtobringalkalinitydown.

The plaster on pool surface becomes rough or discolored.

The water becomes cloudy or milky white.

Install the Cartridge

1. water is balanced.Install the cartridge after

2. With the circulation system OFF, remove the collar from the Nature 2®

side of the system. If this is a newly installed system, remove and store

the temporary plug supplied with the unit.

3. Insert the Nature2 start-up cartridge and replace the collar.

4. Turn on pool circulation system.

5. For newly filled pools that will be using a salt water chlorinator (Nature 2 Fusion Soft); replace after 30 days with Nature 2 mineral cartridge (see