NAV-TV NTV-KIT736 Manual de Usario

NAV-TV No categorizado NTV-KIT736

Lee a continuación 📖 el manual en español para NAV-TV NTV-KIT736 (6 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
MOST-H.U.R. MB V2
Head Unit Replacement interface for select Mercedes
NTV-KIT 736
BHM
04 26/ /16
NTV-DOC210
3950 NW 120th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760
BHM
04/26/16
NTV-DOC210
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product. :
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
2 | P a g e
Fiber Opc extension
cable/connector
NTV-HAR067/NTV-CON002
USB C )
NTV-C
Wire side view
Antenna Adapter
NTV-CAB027
The MOST-HUR ML is a radio replacement interface for Mercedes Benz ML vehicles equipped with an V2
external M.O.S.T. ber opc amplier. The module allows the factory amplier, speakers and sound quality to
be retained when adding a modern aermarket radio. Other components in the factory system, such as a CD
changer, satellite radio, telephone module, DVD player, or any other factory component in the M.O.S.T loop
will not need to removed, but will not funcon aer the installaon.
Pin #
Descripon
Color
Radio Connecons:
1
Constant 12v (+)
Yellow
Radio, Constant Power
2
Le Front Audio IN
White RCA
Radio, Le Front RCA OUT
3
Rear Common Shield
Green/Purple RCA
Radio, Rear RCA Common
4
Le Rear Audio IN
Green RCA
Radio, Le Rear OUT
5
Remote IN
Yellow/Black
Radio, Remote OUT
6
-- --NOT USED
Yellow/Blue
--
7
Reverse Signal OUT
Purple/White
Radio, Reverse IN
8
Illuminaon OUT
Orange
Radio, Illuminaon Control
9
CAN HI
Brown/Red
--
10
Ground
Black
Radio, Black (Ground)
11
Right Front Audio IN
Gray RCA
Radio, Right Front RCA
12
Front Common Shield
White/Gray RCA
Radio, Front RCA Common
13
Right Rear Audio IN
Purple RCA
Radio, Right Rear OUT
14
IR OUT
White
Radio, IR Control
15
Parking Brake OUT
Green
Radio, Parking Brake IN
16
-- --NOT USED
Green/White
--
17
12 ACC OUT (1 amp)
Red
Radio, ACC Power
18
CAN LO
Brown
--
MOST-HUR MB interface
NTV-ASY202
NTV-H
3.5mm plug for IR
NTV-CAB 026
Wires highlighted green will
be connected to the vehicle
via the Plug & Play Harness.
BHM
04/26/16
NTV-DOC210
Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product. :
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
3 | P a g e
1. Base-line the factory radio:
a. Source the radio to FM radio.
b. Adjust the volume to a listening seng comfortable
c. Be certain the funcon is not enabled MUTE
d. Center the balance and fade, center the bass and treble
e. Be certain there are no other problems with the factory stereo system before installing this
unit.
2. Remove the factory radio from the dash.
3. Connect the provided to the main factory connector previously removed from Plug & Play Harness
the OEM radio.
4. Remove the ber opc plug from the OEM Harness.
a. Connect the provided to the OEM ber plug ber connector
b. Connect the new ber assembly to the MOST HUR-MB
interface at the ber port.
5. Connect the RCAs among the to the low-level pre-outs of the Plug & Play Harness
aermarket radio. NOTE: factory subwoofer (if equipped) is not adjustable through the
amplier, therefore will not be adjustable with the aermarket HU.
6. Make all remaining radio connecons:
a. Ground (-) is provided from the HUR wire (PIN 10) Black
b. Constant Power (+) is provided from the HUR wire (PIN 1) Yellow
c. ACC 12v (+) power is provided from the HUR module wire (PIN 17)RED . Connect
the blue Power Antenna wire to this ACC as well (oen mes, some vehicle’s
radios will not supply sucient current to the vehicle power antenna wire.
d. Reverse signal is provided from the HUR module wire (PIN 7) Purple/White
e. Remote from HUR (yellow/black) must connect to the remote OUT from the
radio (typically blue/white)
f. IR NOTE: If signal is provided from the HUR module wire (PIN 14). White
installing Kenwood radio, connect white wire directly to remote-in wire from
head unit. All other radios, connect white wire to the
red wire of the provided IR plug 3.5mm adapter
cable and connect to remote in port on HU.
g. Connect the RCAs from the HUR to the radio’s low level outputs. The high-level speaker leads
are not used for this install.
7. Connect the 18-pin plug from the to the MOST HUR-MB interface at the Plug & Play Harness
power port and proceed to MOST HUR-MB V2 Menu Setup.

Especificaciones del producto

Marca: NAV-TV
Categoría: No categorizado
Modelo: NTV-KIT736

¿Necesitas ayuda?

Si necesitas ayuda con NAV-TV NTV-KIT736 haz una pregunta a continuación y otros usuarios te responderán




No categorizado NAV-TV Manuales

No categorizado Manuales

Últimos No categorizado Manuales