Nedis SAMP41148ME Manual de Usario

Nedis receptor SAMP41148ME

Lee a continuación 📖 el manual en español para Nedis SAMP41148ME (1 páginas) en la categoría receptor. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/1
5.0V 1.0 A, 5.0 W
NL-5215MC 28
Made in China
Bat ch: 013984/XXXXXXXXXX
POWER IN
CATV Amplier
SAMP41148ME
Features
●
●
●
●
●
5-65MHz, 85-1218MHz two way frequency range
For use with cable TV
Simple to install
LED power on indicator
Connections for up to four devices
Part list
Amplifier
AC/DC adapter
Wood screws x 2
Quick setup guide
Connecting the amplifier
Specifications
Installation methods
18.5 mm
6.8 mm
2.0 m max.
(79”)
Wall
Product
Wood screws
86 mm
Bi-directional CATV Amplifier
SAMP41148ME
Cable modem
TV
Coaxial
Cable
Adapter
Safety
1. Connect a coaxial cable to the INPUT jack on the amplifier
and to the cable TV.
2. Connect a coaxial cable to the OUT 1 jack on the amplifier
and to the CATV IN jack on the back of the TV, or cable
modem.
3. Connect the AC/AD adapter to the POWER IN jack and to a
power outlet. When the amplifer is connected to a power
outlet, the POWER IN indicator lights.
NOTE: You can also connect devices to the OUT2, OUT3, and
OUT4 jacks.
Unused outputs must be terminated with a 75 ohm
terminating resistor.
This bi-directional CATV amplifier is designed to work with cable systems that have pay-per-view, digital cable,
or cable modems.
Fre encyqu
Gain
Return path
Return loss
Noise figure
Output level
Impedance
Connector
Output
Power adapter
Dimensions
5-65MHz
n.a.
-7.5dB typ.
15dB typ.
n.a.
n.a.
85-1 MHz218
9dB
15dB typ.
5.5dB
105dBµV
n.a.
75 ohm
F Female
4 connectors
100-240V 50-60Hz / 5.0V 1.0A, 5.0W ~
94 x 69 x 22 (mm)
• Indoor wall mount: Mount two wood screws with center
distance 86mm (3.39") into the wall.
• The wood screws is suitable for mounting at height 2.0m
max. (79")
• Refer to the illustration to install the device correctly.
To reduce risk of shock, this product should only be opened by
an authorized technician when service is required.
Disconnect the product from the mains and other equipment if a
problem should occur.
Read the manual carefully before use. Keep the manual for
future reference.
Only use the device for its intended purposes. Do not use the
device for other purposes than described in the manual.
Do not use the device if any part is damaged or defective.If the
device is damaged or defective, replace the device
immediately.
The device is suitable for indoor use only. Do not use the
device outdoors.
Do not expose the product to water or moisture. Only use the
supplied power adapter.
Where the MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.
●
●
●
●
●
●
●
●
2
3
4
1

Especificaciones del producto

Marca: Nedis
Categoría: receptor
Modelo: SAMP41148ME

¿Necesitas ayuda?

Si necesitas ayuda con Nedis SAMP41148ME haz una pregunta a continuación y otros usuarios te responderán


receptor Nedis Manuales

Nedis

Nedis SAMP41148ME Manual de Usario

14 Agosto 2024
Nedis

Nedis AAMP16140BK Manual de Usario

25 Julio 2024

receptor Manuales

Últimos receptor Manuales

Crown

Crown CDi DriveCore 2|300BL Manual de Usario

27 Octubre 2024
Boss

Boss PT3000 Manual de Usario

27 Octubre 2024
Speco Technologies

Speco Technologies PBM120AT Manual de Usario

27 Octubre 2024
Fosi Audio

Fosi Audio V3 Manual de Usario

26 Octubre 2024
Jensen

Jensen CAR710-4BC Manual de Usario

25 Octubre 2024
Onkyo

Onkyo TX-RZ830 Manual de Usario

24 Octubre 2024
Pioneer

Pioneer VSX-1122K Manual de Usario

22 Octubre 2024
Yamaha

Yamaha HTR-5072 Manual de Usario

21 Octubre 2024
NAD

NAD C 355BEE Manual de Usario

20 Octubre 2024
Yamaha

Yamaha RX-A810 Manual de Usario

20 Octubre 2024