NGM WeMove Quasar Manual de Usario

NGM teléfono móvil WeMove Quasar

Lee a continuación 📖 el manual en español para NGM WeMove Quasar (10 páginas) en la categoría teléfono móvil. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/10
Set up
Installing the USIM cards
The USIM card stores informaon as your personal phone
number, PIN code, carrier services numbers, contacts and other
important details. To access the USIM slots, turn o the phone,
take o the back cover liing it up from its lower part and by
extract the baery. The slots for the USIM cards are placed over
the baery tray. Insert your USIM cards by sliding them in with
their golden contacts facing downwards. USIM1 supports
WCDMA.
Installing the memory card
In order to use all funcons of NGM WEMOVE QUASAR, it is
advisable to install a micro-SD card: it must be inserted the in
back side of the phone, aer powering o and removing the it
back cover. A dedicated slot fort the memory card is placed
right next to the hind camera; Unlock the micro-SD grid by
pushing it into the Open” direcon. Slide in the memory card
so that the gold contacts are turned downwards. Close the grid
and push it into the “Lock” posion.
micro SD
USIM2: GSM
USIM1: UMTS or GSM
Inserng the baery
Your device is provided with a lithium-ion baery and is
designed to be used exclusively with original NGM baeries and
chargers. The baery must be inserted into the backside of the
phone (see illustraon below) with the baery contacts facing
the contacts in the baery tray. When done, the hind cover put
back into posion as shown in the following illustraons.
Charging the battery
Please charge the baery completely before starng to use the
device. Use the provided USB cable, connecng one end to the
provided wall socket adaptor (placed into a socket) and the
other end to the USB connector placed on the le side of the
phone. The phone can also be charged by connecng it to a PC
USB port but in that case it will charge more slowly. While the
baery is charging, an animaon on screen will show the
charging progress if the phone is on. Once charge is completed,
the icon will be lled and the phone can be disconnected from
the grid.
Warning: Do not connect the phone to a boong-up or running
down PC to avoid voltage jumps. In order to preserve the correct
funconing of the device and in order not to compromise
warranty, the sole use of original NGM baery chargers and
accessories are recommended. Please charge the baery
indoors, in a dry and favorable environment. It’s normal for the
baery to get slightly warm during the charging process. The
baery will reach the full capacity when cycled several mes.
Volume
“ +” and “–“
Camera
Speaker
Flash
Micro USB
Connector
Capacive
touch screen
Front camera
Brightness and proximity sensor
Home
Back
Find
On/O and
Standby key
Contextual Menu
Call key
Messaging
Microphone
Menu

Especificaciones del producto

Marca: NGM
Categoría: teléfono móvil
Modelo: WeMove Quasar

¿Necesitas ayuda?

Si necesitas ayuda con NGM WeMove Quasar haz una pregunta a continuación y otros usuarios te responderán




teléfono móvil NGM Manuales

teléfono móvil Manuales

Últimos teléfono móvil Manuales