Nitecore MH41 Manual de Usario
Lee a continuación 📖 el manual en español para Nitecore MH41 (3 páginas) en la categoría Linternas. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/3
®User Manual
Features
• Designed for law enforcement, hunting and tactical applications
• Utilizes a CREE XHP50 LED
• Integrated micro-textured reflector offers wide angle lighting
• Maximum beam intensity up to 61,400cd
• Maximum beam distance up to 495 meters
• High efficiency constant current circuit enables maximum output up to 2,150 lumens
• 5 brightness levels and 3 special modes easily accessible via dual side switch interface
• Broad voltage circuit accepts both rechargeable and non-rechargeable Lithium batteries
• Direct access to Ultralow and Turbo levels
• A power indicator built into the side switch indicates remaining battery power (Chinese
patent: ZL201220057767.4)
• Intelligent memory function for brightness levels and Strobe mode
• Intelligent Li-ion battery charging circuit with automatic detection capability
• Charging port cover protects the port from dust and water ingression
• Spring-loaded impact absorption mechanism with reverse polarity protection (Chinese
patent:201220677948.7)
• Stainless steel titanium-plated clip
• Toughened ultra-clear mineral glass with anti-reflective coating
• Constructed from aerospace grade aluminum alloy
• HAIII military grade hard-anodized
• Waterproof in accordance with IPX-8 (submersible to two meters)
• Impact resistant to 1.5 meters
• Tail stand capability
Dimensions
Length: 9.84” (250mm)
Head diameter: 2.36” (60mm)
Tail diameter: 1” (25.4mm)
Weight: 11.32oz (321g) (without battery)
Thanks for purchasing NITECORE!
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
E-mail: info@nitecore.com
FAX: +86-20-83882723
Web: www.nitecore.com
Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
Battery Options
The All-Round Flashlight Expert
Operating Instructions
Battery Installation
Install two 18650 batteries or four CR123 batteries as
illustrated.
Warning
1. Install batteries with the positive ends (+) pointing
towards the flashlight head. Otherwise the
flashlight will not work;
2. Do not mix rechargeable batteries with primary
batteries;
3. Do not mix batteries of different types or brands;
4. Do not mix batteries of different power levels.
Strobe mode last used.
Direct Access to Turbo (2150 lumens)
With the MH41 turned on, press and hold the Step-up switch for one second to enter turbo
directly;
With the MH41 turned off, press and hold the Step-up switch , and press the tailcap switch
all the way down to enter turbo directly.
Direct Access to Ultralow (1 lumen)
With the MH41 turned on, press and hold the Step-down switch for one second to enter
Ultralow directly;
With the MH41 turned off, press and hold the Step-down switch , and press the tailcap
switch all the way down to enter Ultralow directly.
Special Modes
With the MH41 turned on, press the side switches simultaneously to enter Strobe mode.
In Strobe, press the Step-up switch to switch from strobe, location beacon to SOS (no
cycling back). Press the Step-down switch to return to the previous mode.
To exit special modes, press both Step-up and Step-down switches again. The MH41
will revert to the brightness level last used.
ATR Technology
Advanced temperature regulation (ATR) technology allows MH41 to dynamically adjust output
performance based on its internal temperature. This prevents damage from overheating and
prolongs its working life.
Charging
The MH41 features intelligent charging capability. Turn the MH41 on, lift the charging port
cover, and connect the flashlight charging port to an external power source with the charging
cord. The normal charging time for two 18650 batteries is 5 hours.
Accessories
Two Nitecore 18650 rechargeable Li-ion batteries
(NL183), clip, tactical ring, lanyard, charger,
quality holster, spare tailcap switch cover, and
spare O-ring
NOTICE
Stated data has been
measured according to the
international flashlight testing
standards ANSI/NEMA FL1
using 2 x Nitecore 18650
Li-ion batteries (3.7V,
3400mAh) or 4 x Nitecore
CR123 (3V 1700mAh)
batteries under laboratory
conditions. The data may vary
due to individual usage habits
and environmental conditions.
1. Under normal charging conditions, the blue
indicator in the side switches will blink once
every 1.5 seconds. When charging is complete,
the blue indicator will illuminate steadily.
2. If a problem is detected during the charging
process, the MH41 will stop charging and the
blue indicator will blink rapidly. This is usually
caused by damaged or incorrectly inserted
batteries.
Note: DO NOT charge batteries of different types or brands together.
Power Tips
With the MH41 turned off, press all three switches (both side switches and the tailcap
switch to activate the blue power indicator that blinks to indicate battery voltage (accurate to
±0.1V). For example, when battery voltage is at 4.2V, the red power indicator will blink 4
times, followed by a 1.5 second pause and another 2 blinks. Different voltages represent the
corresponding remaining battery power levels.
Changing / Charging Battery
When batteries are close to depletion, the brightness level will be locked at ultralow to protect
batteries. Please change batteries at this time.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of
silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality. Any defective / malfunctioning
NITECORE® product can be repaired free of charge for a period of 60 months (5 years) from
the date of purchase. Beyond 60 months (5 years), a limited warranty applies, covering the
cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized
parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please contact alocal
NITECORE® distributor or send an email to service@nitecore.com
※All images, text and statements specified herein this user manual are for reference purpose
only. Should any discrepancy occurs between this manual and information specified on
www.nitecore.com, information on our official website shall prevail. Sysmax Industry Co., Ltd.
reserves the rights to interpret and amend the content of this document at any time without
prior notice.
Momentary Illumination
Press and hold the tailcap switch partway down to momentarily turn the MH41 on. Release
the tailcap switch to turn the flashlight off.
On/Off Operation
To turn the MH41 on, press the tailcap switch all the way down until a “click” is heard;
To turn the MH41 off, press the tailcap switch all the way down again until a “click” is heard.
Brightness Levels
With the MH41 turned on, press the Step-up switch repeatedly to switch from Ultralow,
Low, Medium, High, and ends at Turbo. Press the Step-down switch repeatedly to switch
to a lower level until Ultralow.
Note: The MH41 has memory function. Upon turning-on, it will resume the brightness level or
*Warning: Charge 18650 rechargeable Li-ion batteries only. Do not attempt to charge
non-rechargeable batteries, CR123 or RCR123 batteries.
Brightness & Runtime
TYPE
Nominal voltage
Compatible
Primary Lithium battery * CR123 3V Yes (Compatible but can
NOT be recharged)
Yes (Compatible but can
NOT be recharged)
18650 Rechargeable Li-ion battery 18650 3.7V Yes (Compatible and can
be recharged)
Rechargeable Li-ion battery * RCR123 3.7V
20151120
Please find us on facebook:
NITECORE Flashlights
MH41
TURBO HIGH MID LOW
LUMENS
1230
LUMENS
2150
LUMENS
580
LUMENS
90
30
min
1
h min45
2
h min30
400
h
5
h min45
4
h min15
1
h
32
h min15
18
h min15
LOWER
LUMEN
1
850
h
495m
(Beam Distance)
61,400cd
(Peak Beam Intensity)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m
(Impact Resistant)
4×CR123
2×18650
4.2V3.5V 3.7V 3.9V
Low Power Full Power
3.2V2.4V 2.8V 3.0V
Low Power Full Power
18650×2:
CR123×4:
Especificaciones del producto
| Marca: | Nitecore |
| Categoría: | Linternas |
| Modelo: | MH41 |
¿Necesitas ayuda?
Si necesitas ayuda con Nitecore MH41 haz una pregunta a continuación y otros usuarios te responderán
Linternas Nitecore Manuales
18 Octubre 2024
18 Octubre 2024
16 Octubre 2024
15 Octubre 2024
13 Octubre 2024
12 Octubre 2024
12 Octubre 2024
12 Octubre 2024
11 Octubre 2024
23 Julio 2024
Linternas Manuales
- Linternas Panasonic
- Linternas Makita
- Linternas Black And Decker
- Linternas Anslut
- Linternas Milwaukee
- Linternas Silva
- Linternas Fenix
- Linternas Klarus
- Linternas Petzl
- Linternas Olight
- Linternas Barska
Últimos Linternas Manuales
18 Octubre 2024
14 Octubre 2024
13 Octubre 2024
13 Octubre 2024
12 Octubre 2024
12 Octubre 2024
11 Octubre 2024
11 Octubre 2024
11 Octubre 2024
11 Octubre 2024