Nitek WB5362 Manual de Usario

Nitek repetidor wifi WB5362

Lee a continuación 📖 el manual en español para Nitek WB5362 (6 páginas) en la categoría repetidor wifi. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/6
WB5326
Wireless Bridge
Quick Start Guide
01/09/12
2
Quick Start Guide
WB5326 Outdoor Wireless Bridge
Items Included in Kit
(1) WB5326 RADIO
(1) PoE (48V, 1A)
(1) Mounting Hardware Accessories
(1) Quick Start Guide
(1) Product CD
Hardware Installation
1. Put an Ethernet cable with RJ-45 connector through the water-tight joint. Make the RJ-45 connector as a 568B
wiring configuration:
2. Using the hardware provided mount the Bridge unit in position. Make sure that the Ethernet connection is
facing down. Keep in mind that the unit has a built-in antenna and must have line of sight between units. Refer
to separate mounting guide sheet for illustrations of hardware assembly.
3. Plug water-tight joint side of the Ethernet cable into the Bridge unit. Connect the other end of the cable to the
power injector supplied with the unit. Also connect a standard RJ-45 network cable for the power injector to a
hub or a terminal.
4. There is a ground connection on enna port. The ground connection should the Bridge unit located near the ant
be connected to a proper earth ground point.
5. The antenna of the Bridge unit is behind the plastic face of the unit and must face the other Bridge unit. Make
sure you have line of site to the opposite unit and that they face each other.
Warning Do not mount Bridge unit near electric power lines, electric
lights or near strong electric power signals
6. Power the unit using the supplied PoE inserter.
12345678
568B
21 4
3
Terminal Wire
1 Orange/White
2 Orange
3 Green/White
4 Blue
5 Blue/White
6 Green
7 Brown/White
8 Brown
3
These instructions are designed for configuring this system to be a network Bridge.
1. Power up each Bridge unit for 30 seconds, then RESET it by pressing the Reset button for 10 seconds.
2. On the PC you will be using to setup the Bridge units, select “Network Connections” in the control Panel. You
can get to it by Start>Settings>Control Panel>Network Connections. Locate the “Local Area Connection”
and right click to select “ ”. When in that tab select “Properties Internet Protocol (TCP/IP)”.
3. Set up a computer with a network IP address of:
IP address 192.168.1.100
Subnet 255.255.255.0
Gateway 192.168.1.254
4. Select and note an IP address for each Bridge unit along with an ID name and password for each unit (see
Example 1). You will also need to select a Channel from 1-11 for all units. Bridge units are designed to work as a
pair. Both units of the pair must operate on the same channel. Different sets should use different channels. For
maximum data speed separate sets by 4 channels or more (i.e., 1, 6, 11).
* Each pair of units must operate on the same channel (1 - 11). Different pairs should use different channels.
Example 1
Unit Your IP Address
For each unit Password Unit ID Channel*
1 xxx.xxx.xxx.1 Build 1 Building One 1
2 xxx.xxx.xxx.2 Build 2 Building Two 1
3
4
5
6

Especificaciones del producto

Marca: Nitek
Categoría: repetidor wifi
Modelo: WB5362

¿Necesitas ayuda?

Si necesitas ayuda con Nitek WB5362 haz una pregunta a continuación y otros usuarios te responderán


repetidor wifi Nitek Manuales

Nitek

Nitek WB5362 Manual de Usario

16 Agosto 2024

repetidor wifi Manuales

Últimos repetidor wifi Manuales

Hawking Technologies

Hawking Technologies HOW2R1 Manual de Usario

14 Octubre 2024
Planet

Planet WNAP-1110 Manual de Usario

10 Octubre 2024
Netgear

Netgear WN2000RPTv2 Manual de Usario

10 Octubre 2024
Netgear

Netgear A7000 Manual de Usario

3 Octubre 2024
Ubiquiti Networks

Ubiquiti Networks MIMO Multiplexer Manual de Usario

3 Octubre 2024
Planet

Planet LRP-104CET Manual de Usario

30 Septiembre 2024
Netgear

Netgear WN2500RP Manual de Usario

30 Septiembre 2024
Totolink

Totolink EX200U Manual de Usario

29 Septiembre 2024
Silvercrest

Silvercrest SWV 300 B2 Manual de Usario

29 Septiembre 2024
Totolink

Totolink EX300 Manual de Usario

28 Septiembre 2024