Nixeus NX-VUE24A Manual de Usario

Nixeus Monitor NX-VUE24A

Lee a continuación 📖 el manual en español para Nixeus NX-VUE24A (43 páginas) en la categoría Monitor. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/43

USER%MANUAL%

NX+ %VUE%24A

NX+ %VUE%24B

Table%of%Contents%

Important Information 3

Getting Started 5

Input and Connection Ports 6

Monitor & Stand Adjustment - 9 7

Enabling AMD FreeSync Technology - 10 14

Monitor Button Operations - Legends and Functions 15

Button Functions and Features for On Screen Display (OSD) Main Menu 16

On Screen Display (OSD) PICTURE Sub- Menu 17

Brightness Adjustment 17

Contrast Adjustment 18

Gamma Adjustment 19

Dynamic Contrast Ratio Adjustment (DCR) 20

On Screen Display (OSD) COLOR Sub-Menu 21

Color Temperature 21

Preset Color Temperatures 22

User Define (Red, Green, Blue Adjustment for Color Calibration) - 23 27

On Screen Display (OSD) OSD Settings Sub- - Menu 28

Horizontal and Vertical Adjustment - 28 29

Transparency 30

Time Out 31

On Screen Display (OSD) - Setup Sub- Menu 32

33 Language

Input 34

Display Size 35

Reset 36

Volume 37

Audio Input 38

OD (Over Drive) 39

Warranty Information - 40 41

Electronics Recycling and Proper Electronics Disposal 42

Nixeus Technology, Inc - Contact Information 43

Important Information

Important Note:

Thank-you for your purchase! Please make sure your computer hardware and graphics card supports the Nixeus

Vue 24" Monitor. Some devices and connections may not be able to support the full 1920x1080 resolution at

144Hz refresh rates. Avoid using 3rd party cable adapters/convertors to connect the NX-VUE24 to HDMI,

VGA, and DVI output devices - we cannot guarantee they will be compatible with the NX-VUE24. Only use

cables that are direct connections and not "convertors". If you are not sure, please contact your computer

hardware’s manufacturer. Please read this manual before using NX-VUE24 with your computer. It contains

important information regarding the use and care of computer monitors.

Safety and Maintenance:

1) Do not expose the monitor to direct sunlight. Keep the monitor away from a stove or any other heat source.

2) Remove or secure any objects that may fall into the monitor’s vents. Do not obstruct or block the cooling

vents of the monitor.

3) Don’t jam the vents on the enclosure.

4) When setting up the monitor for use, please ensure the power plug and socket are easy to insert and extract.

5) When disconnecting the power cord or DC power line for the monitor, please wait for 6 seconds before

reconnecting the power cord or DC power line wires for normal operation.

6) Please use only approved power line and power adapters provided by Nixeus. If any power connections are

missing, please contact Nixeus for a replacement. Using un-authorized power connectors may damage your

monitor and void your warranty.

7) During operation, please do not throw objects and take care to avoid collision with the monitor. Do not

overclock or modify the monitor’s decoder board. Please do not apply excessive force to the LCD panel or drop

the monitor. Warranty does not cover physical damages, over-clocking, and modifications to the monitor.

8) When monitor is not in use for a long period of time, please disconnect the power plug.

9) When using slightly wet cloth or LCD cleaners to clean the monitor, please disconnect the power adapter. Do

not use organic solvent, alcohol, house hold glass cleaners or ammonia liquid to clean the monitor - these may

damage the display panel.

10) Do not store or use monitor in hot, direct sunlight, or in a cold environment. To avoid electrical shock and

to prevent monitor damage; do not use the monitor in dusty, rain, wet, and humid conditions. If monitor gets

wet, please wipe clean with soft dry cloth as soon as possible. If foreign objects or liquids get into the monitor,

please disconnect power adapter immediately. For service please contact Nixeus Technical support for service

and repair at techsupport@nixeus.com

11) To ensure long life and best performance of the monitor, please use the monitor in these safe and optimum

conditions: Temperature = 0-40 degrees Celsius (32°-95° Fahrenheit), Humidity = 20-80% RH

Getting Started

Box Contents:

• Nixeus Vue 24 1920x1080 FreeSync™ 144Hz Gaming Monitor (NX- 24) ” VUE

• Stand Base x 1 (with 4 screws)

• Stand Shaft x 1 (with 4 screws)

• Black DisplayPort to DisplayPort Cable x 1

• Power Adapter & Power Cable x 1

• NX-VUE24 Quick Start Guide

• 3.5mm AUX Audio Cable

Installing Base Stand: (Tools needed – Philips Screw Driver)

Please refer to quick start guide for installation of Stand Base and Stand Shaft.

NX- - VUE24A Monitor Tilting Foward/Back:

Use both hands, hold the top and bottom or right and left to tilt the monitor forward or backward by up to 15°.

NX- - VUE24A Monitor Tilting Height Adjustment:

Use both hands, press down the locking button, the slide the monitor up and down the stand shaft for your

desired height by up to 4 inches. Release button to lock in the desired height.

NX- - VUE24A Monitor Pivot to 90° Portrait Mode:

Using both hands, first raise the monitor to the highest point. Next pivot the monitor clock wise into portrait

mode.

NOTE: All Above Monitor and Stand Adjustments is for the NX-VUE24A model with a full feature premium

stand. The NX-VUE24B model only includes a base stand with tilt feature.

10"

To enable AMD FreeSync™ Technology:

1) First, you must have an AMD Radeon or AMD APU that is compatible with AMD FreeSync™ technology.

Below is a list of AMD hardware that is compatible with FreeSync™.

AMD Hardware

Compatible With

FreeSync

AMD Radeon R9 200

Series Graphics Card

Radeon R7 260x

Radeon R9 285

Radeon R9 290

Radeon R9 290x

Radeon R9 295x2

AMD Radeon R9 300

Series Graphics Card

Radeon R7 360

Radeon R9 380

Radeon R9 390

Radeon R9 390x

Radeon Fury

Radeon Fury X

Radeon Fury Nano

AMD APU

AMD A10- 7870K

AMD A10- 7850K

AMD A10- 7700K

AMD A6- 7400K

"AMD APU Requires

AMD Mother Board with

DisplayPort output"

For an updated list of AMD hardware that is compatible with AMD FreeSync™ technology, please visit:

http://www.amd.com/en-us/innovations/software-technologies/technologies-gaming/freesync

11"

2) Second, you must install or have already installed an Catalyst graphics drivers that have AMD AMD

FreeSync™ technology (at minimum AMD Catalyst 15.7 Graphics Driver). For updated FreeSync™ enabled

AMD graphics drivers, please visit:

http://support.amd.com/en-us/download

3) Third, connect the NX-VUE24 monitor to your AMD FreeSync™ enabled hardware using the included

DisplayPort cable. Turn on your computer and power on the -VUE24 by pressing the NX [ ] POWER

ON/OFF button.

4) When your computer boots to the desktop, you should see a pop up notification prompting you to enable

AMD FreeSync™ with your new NX-VUE24 FreeSync™ monitor by accessing the AMD Catalyst Control

Center.

NOTE: If you do not see the above pop-up notification. You can still enable FreeSync™ by going directly to

the AMD Catalyst Control Center.

12"

5) In the AMD Catalyst Control Center menu, click on the "My Digital Flat-Panels" section the left side then

select the "Properties (Digital Flat-Panel) sub-menu. You should see the "Properties (Digital Flat-Panel)"

pictured below:

15"

1) Monitor Button Operations - Legends and Functions

Button Functions when not navigating in the On Screen Display (OSD) Main Menu

[ ] - Shows Main Menu On Screen Display (OSD)/ or EXIT from Main Menu Button #1

Press and Hold to OSD LOCKED, Press and Hold to OSD UNLOCKED

[ ] - Down Button Adjust LOW BLUE RAY (Blue Light Mode) from STRONGEST, STRONG,

MEDIAN, WEAKEST or OFF.

NOTE: LOW BLUE RAY feature limits the monitor's blue color output to minimize eye strain,

eye fatigue, and safer viewing of the monitor during long usage, work or gaming sessions.

[ ] - Up Button No Function (May vary in different models or regions)

[ ] - Button #2 Video Source Input selection - DisplayPort, DVI, HDMI, or VGA

Note: Please wait 3 seconds before video appears for selected Video Source Input

[ ] POWER ON/OFF

16"

Button Functions and Features for On Screen Display (OSD) Main Menu

[ ] Shows Main Menu On Screen Display (OSD)/ Exit Sub-Menu or Exit Selection/Back

NOTE: Pressing more than once or multiple times will exit out of Sub-menu and/or exit MAIN [ ]

MENU for OSD.

[ ] Navigate or Move Down/ Adjust Down

[ ] Navigate or Move Up/ Adjust Up

[ ] Confirm feature or OSD Menu Selection/OK

17"

2) On Screen Display (OSD) PICTURE SUB-MENU

PICTURE (Sub-Menu) - BRIGHTNESS

a) To bring up the OSD Main Menu, press [ ]

b) Make sure the PICTURE sub-menu is highlighted in red (see picture) and press to confirm selection. [ ]

Highlight BRIGHTNESS and press to enter into BRIGHTNESS adjustment. [ ]

c) Press to make brightness lower or press to make brightness higher [ ] [ ]

(Default BRIGHTNESS is at 80).

d) Once you adjust the BRIGHTNESS settings to your desired level, press once to confirm and exit to the [ ]

PICTURE sub-menu.

Especificaciones del producto

Marca:	Nixeus
Categoría:	Monitor
Modelo:	NX-VUE24A
Color del producto:	Meerkleurig
Ancho:	380 mm
Profundidad:	260 mm
Altura:	358 mm
Indicador de nivel de agua:	Ja
Capacidad del tanque de agua:	0.8 l
Almacenamiento de cable:	Ja
Termostato ajustable:	Ja
Sistema antical automático:	Ja
Versión de vapor continuo:	110 g/min
Tanque de agua extraíble:	Ja
Función de vapor vertical:	Ja
Tiempo de calentamiento:	2 min
vapor variable:	Ja
Material/revestimiento de la suela:	Aluminium zoolplaat
Rendimiento de impulso de vapor:	- g/min
Continuar:	Ja
Detección de tanque vacío:	Ja
Presión máxima de vapor:	5 bar
poder del hierro:	2300 W
Luz lista para vapor:	Ja