Optex SW-2 Manual de Usario
Lee a continuación 📖 el manual en español para Optex SW-2 (44 páginas) en la categoría Sensor de movimiento/marco. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/44
USER INSTRUCTIONS
OVENS EN
FR
NOTICE D'EMPLOI ET D'INSTALLATION
DES FOURS ENCASTRABLES
USINES DE ROSIÈRES - 30, rue Y. LACELLE - Rosières - 18400 - Lunery - France
02
15
Safety Indications
• When you open the door after you have finished cooking, a few
drops of water may come out of the door. It depends on the type of
food you have cooked.
• During cooking, moisture may condense inside the oven cavity or
on the glass of the door. This is a normal condition. To reduce this
effect, wait 10-15 minutes after turning on the power before putting
food inside the oven. ln any case, the condensation disappears when
the oven reaches the cooking temperature.
• Cook the vegetables in a container with a lid instead of an open tray.
• Avoid leaving food inside the oven after cooking for more than
15/20 minutes.
• WARNING: the appliance and accessible parts become hot during
use. Be careful not to touch any hot parts.
• WARNING: the accessible parts can become hot when the grill is in
use. Children should be kept at a safe distance.
• WARNING: ensure that the appliance is switched off before
replacing the bulb, to avoid the possibility of electric shocks.
• WARNING: in order to avoid any danger caused by the accidental
resetting of the thermal interruption device, the appliance should
not be powered by an external switching device, such as a timer, or
be connected to a circuit that is regularly switched on and off.
• Children under 8 should be kept at a safe distance from the
appliance if not continuously supervised.
• Children should not play with the appliance.
• The appliance can be used by those aged 8 or over and by those
with limited physical, sensorial or mental capacities, without
experience or knowledge of the product, only if supervised or
provided with instruction as to the operation of the appliance, in a
safe way with awareness of the possible risks.
• Cleaning and maintenance should not be carried out by
unsupervised children.
• Do not use rough or abrasive materials or sharp metal scrapers to
clean the oven door glasses, as they can scratch the surface and
EN 02
cause the glass to shatter.
• The oven must be switched off before removing the removable
parts. After cleaning, reassemble them according the instructions.
• Only use the meat probe recommended for this oven.
• Do not use a steam cleaner for cleaning operations.
• Connect a plug to the supply cable that is able to bear the voltage,
current and load indicated on the tag and having the earth contact.
The socket must be suitable for the load indicated on the tag and
must have ground contact connected and in operation. The earth
conductor is yellow-green in colour. This operation should be carried
out by a suitably qualified professional. ln case of incompatibility
between the socket and the appliance plug, ask a qualified electrician
to substitute the socket with another suitable type. The plug and the
socket must be conformed to the current norms of the installation
country. Connection to the power source can also be made by placing
an omnipolar breaker between the appliance and the power source
that can bear the maximum connected load and that is in line with
current legislation. The yellow-green earth cable should not be
interrupted by the breaker. The socket or omnipolar breaker used for
the connection should be easily accessible when the appliance is
installed.
• The disconnection may be achieved by having the plug accessible or
by incorporating a switch in the fixed wiring in accordance with the
wiring rules.
• lf the power cable is damaged, it should be substituted with a cable
or special bundle available from the manufacturer or by contacting
the customer service department. The type of power cable must be
H05V2V2-F. This operation should be carried out by a suitably
qualified professional. The earth conductor (yellow-green) must be
approximately 10 mm longer than the other conductors. For any
repairs, refer only to the Customer Care Department and request the
use of original spare parts.
• Failure to comply with the above can compromise the safety of the
appliance and invalidate the guarantee.
EN 03
Especificaciones del producto
| Marca: | Optex |
| Categoría: | Sensor de movimiento/marco |
| Modelo: | SW-2 |
¿Necesitas ayuda?
Si necesitas ayuda con Optex SW-2 haz una pregunta a continuación y otros usuarios te responderán
Sensor de movimiento/marco Optex Manuales
4 Octubre 2024
17 Septiembre 2024
15 Septiembre 2024
3 Septiembre 2024
29 Agosto 2024
17 Agosto 2024
17 Agosto 2024
3 Agosto 2024
15 Julio 2024
Sensor de movimiento/marco Manuales
- Sensor de movimiento/marco Abus
- Sensor de movimiento/marco Hikvision
- Sensor de movimiento/marco Nedis
- Sensor de movimiento/marco Caliber
- Sensor de movimiento/marco Vivanco
- Sensor de movimiento/marco Ezviz
- Sensor de movimiento/marco EMOS
- Sensor de movimiento/marco Axis
- Sensor de movimiento/marco Hama
- Sensor de movimiento/marco Techly
- Sensor de movimiento/marco Steren
- Sensor de movimiento/marco Olympia
- Sensor de movimiento/marco Kidde
- Sensor de movimiento/marco Konig
- Sensor de movimiento/marco Xavax
- Sensor de movimiento/marco X4-Tech
- Sensor de movimiento/marco Marmitek
- Sensor de movimiento/marco Fibaro
- Sensor de movimiento/marco Nexa
- Sensor de movimiento/marco Satel
- Sensor de movimiento/marco Homematic IP
- Sensor de movimiento/marco Avidsen
- Sensor de movimiento/marco ORNO
- Sensor de movimiento/marco Kanlux
- Sensor de movimiento/marco Schwaiger
- Sensor de movimiento/marco Inovonics
- Sensor de movimiento/marco Tellur
- Sensor de movimiento/marco Sonoff
- Sensor de movimiento/marco Gewiss
- Sensor de movimiento/marco Setti+
Últimos Sensor de movimiento/marco Manuales
14 Octubre 2024
6 Octubre 2024
19 Septiembre 2024
19 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024