Oreck RinseAMatic XLS70 Manual de Usario

Oreck No categorizado RinseAMatic XLS70

Lee a continuación 📖 el manual en español para Oreck RinseAMatic XLS70 (8 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

U ’SER S GUIDE

•IMPORTANT•

SAVE THIS BOOKLET!

Includes:

• Warranty

• Safety Warnings

• Parts List

• Operating Instructions

• Accessories List

• Trouble Diagnosis

S I M P L Y A M A Z I N G

XLS700 series

CARPET & HARD FLOOR CLEANER

BEFORE OPERATING CLEANER,

READ ALL INSTRUCTIONS IN

THIS MANUAL CAREFULLY.

Table of Contents

Maintenance and Customer Service, Polarized Plug Notice,

Accessories, Important Safety Instructions . . . . . . . . . . . . . . page 1

Warranty, Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . page 2

Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3

Parts Checklist, Features, To Assemble Cleaner . . . . . . . . . . page 4

Servicing of double-Insulated Appliances, A.L.C.I.,

To Set Up Cleaner, To Prepare Carpet, Operating Inst. . . . . . page 5

Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6

To Clean Carpet Cleaner, To Store Cleaner, Things To Do,

To Replace Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7

Maintenance and Customer Service

Your ORECK STEEMER is a product of precise engineering. The motor

bearings are permanently lubricated and should not be oiled. If you

require additional information or have problems with your Oreck

appliance, you may call ORECK CUSTOMER SERVICE at:

US: 1-800-989-3535 Canada: 1-888-676-7325

Please specify the model number and serial code number which can be

found on the data plate on the back of the vacuum.

Save your sales or purchase slip. Should your Oreck appliance require

warranty service in the U.S.A., present this slip to the Authorized Service

Center as your proof of purchase date or, in Canada, call customer

service.

Polarized Plug Notice

This product is equipped with a polarized alternating current line plug (a

plug having one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you are unable to

insert the plug fully into the outlet, try reversing the plug. If the plug

should still fail to fit, contact an electrician to replace the obsolete outlet.

Do not defeat the purpose of the polarized plug.

Accessories

Call your authorized ORECK Home Care Center, your authorized dealer,

or call the Home Care Hotline toll free at: 1-800-989-3535

ITEM PART #

Oreck Steemer Full Release®Professional FRSS131

Spot & Stain PreCleaner

Oreck Steemer Full Release®Professional 40032-03

Carpet & Hard Floor Cleaner

Oreck Steemer Full Release®Professional 40033-03

Upholstery Cleaner

Steemer Value-6-Pack FRC132

5 Carpet & Hard Floor Cleaners

1 Spot & Stain PreCleaner

Oreck Steemer Belts (2 Pack) OR114

Squeegee Replacement 53311-01-384

When using an electrical appliance, basic

precautions should always be followed,

including the following:

READ ALL INSTRUCTIONS BEFORE

USING THIS STEEMER CLEANER

WARNING

To reduce the risk of fire,

electric shock, or injury:

IMPORTANT SAFETY

INSTRUCTIONS

• Do not leave appliance unattended when plugged in.

Unplug from outlet when not in use and before servicing.

• Use indoors only.

• Do not immerse motorized nozzle, use only on carpet

moistened by cleaning process.

• Do not allow to be used as a toy. Do not allow infants or

children around the machine during operation.

• Use only as described in this manual. Use only

manufacturer’s recommended attachments.

• Do not use with damaged cord or plug. If appliance is not

working as it should, has been dropped, damaged, left

outdoors, or dropped into water, return it to a service

center or call customer service at:

US: 1-800-989-3535 Canada: 1-888-676-7325

• Do not pull or carry by cord, use cord as a handle, close

door on cord, or pull cord around sharp edges or corners.

Keep cord away from heated surfaces.

• Do not run appliance over cord.

• Do not unplug by pulling on cord. To unplug, grasp the

plug, not the cord.

• Do not handle plug or appliance with wet hands.

• Do not put any object into openings. Do not use with any

opening blocked; keep free of dust, lint, hair and anything

that may reduce air flow.

• Keep hair, loose clothing, fingers and all parts of body

away from openings and moving parts.

• Do not use to pick up anything that is burning or smoking,

such as cigarettes, matches, or hot ashes.

• Turn off all controls before unplugging.

• Use extra care when cleaning on stairs.

• Do not use to pick up flammable or combustible liquids,

such as gasoline or lighter fluid, or use in areas where

they may be present.

• Do not use appliance in an enclosed space where

flammable, explosive or toxic vapors are given off by oil

base paint, paint thinner, some mothproofing substances,

or in an area where flammable dust is present.

• Immediately switch off and unplug appliance if water or

cleaning solution is observed leaking from machine during

operation.

• To prevent over filling the recovery water tank, empty the

recovery water tank every time the clean water tank is

filled.

• Always turn off the appliance before connecting or

disconnecting motorized nozzle.

SAVE THESE INSTRUCTIONS

Household Use Only

Water and cleaning

solution is not dispensing

onto carpet or upholstery.

Not removing certain

stains. Heavy traffic area

spots.

Carpet is excessively wet

after cleaning.

Note: Under normal

conditions, a carpet may

take up to four hours or

longer to completely dry.

Drying time depends on a

combination of various

factors including: carpet

type, carpet pile

thickness, temperature,

humidity, air circulation

and the number of wet

passes.

Excessive foaming at

spray tips.

Dark streaks on carpet

after cleaning.

Steemer brush roll will not

turn.

Cleaner will not run or

suddenly stops.

• Check that the upper supply tank is partially

filled with lukewarm water. Caution: Do not

overfill.

• Check that a cleaner cartridge is installed

and that the white lever is locked in the

downward position. Due to pressurization, the

cleaner will not properly operate without a

cleaner cartridge in place. If the cleaner

cartridge is empty, replace it with a full

cartridge.

• Check that the spray tips are not clogged.

Use a towel or damp cloth to clean.

• For above-the-floor cleaning, check that the

hand-held nozzle and hose assembly is

properly connected to the cleaner neck. Also

insure that the button lock has been

engaged.

• For best results, use a stain pretreatment,

such as Steemer Full Release®Professional

Spot & Stain PreCleaner. These solutions

loosen and break down most common

household grease, oil, and food stains.

• Make several slow passes over the stain

from different angles.

• Make at least one additional pass over the

wet carpet without pressing the cleaner

button.

• Check that the handle trigger lock is not

engaged.

• With each pass, slowly pull the unit toward

you to extract any remaining liquid in the

carpet. To speed drying, gently push the

nozzle deep into the carpet pile.

• Check for airpath obstructions in the

stair/upholstery hose, cleaner neck and in the

nozzle. Check to insure that the inlet screen

is free of debris.

• Check that the upper supply tank has water.

• Operate the machine more slowly; you will

achieve better results with one slow pass

than several fast strokes.

• Overlap each pass to provide maximum

cleaning without streaking.

• In high traffic or heavily soiled carpets, it is

occasionally beneficial to allow the carpet to

dry and repeat the process as needed to

achieve optimal cleaning.

• Check that the nozzle power cord is

completely connected to the main unit.

• If an obstruction stalls the brush roll, the belt

is designed to burn through so as to protect

the motor. Please insure through inspection

that the brush roll is free of obstructions and

is free to turn. Secondly, make sure that the

belt is in good working order. Replace the

belt if needed.

• If the belt and the brush roll become

excessively wet, momentary slippage can

occur. By running the unit on a dry section of

carpet for a minute or less, the belt will

function properly.

• Reinsert the plug, if it has slipped out of the

outlet.

• The A.L.C.I. may have tripped off due to

fluctuations in household current. Press the

reset button and restart the unit.

P SROBLEM OLUTION

Warranty

ORECK MANUFACTURING COMPANY: (Oreck Manufacturing Company

gives you the following limited warranty for this product only if it was

originally purchased for residential use, not resale from Oreck or an Oreck

Authorized Retail Dealer.)

Oreck will repair or replace, free of charge, to the original purchaser, any

part which is found to be defective in material or workmanship within one

(1) year of the date of purchase. This limited warranty applies to normal

domestic use. Any commercial use of this product will void this limited

warranty.

This limited warranty does not cover the replacement of expendable or

consumable parts such as belts, brushes, and other parts subject to

normal wear unless they are defective in material or workmanship.

This limited warranty does not apply to any part subjected to accident,

abuse, commercial use, alteration, misuse, damage caused by act of God,

the use of voltages other than indicated on the serial number displayed on

this product or service of this product by other than Oreck or a

participating Factory Authorized Service Center.

Oreck does not authorize any person or representative to assume or grant

any other warranty obligation with the sale of this product.

Oreck’s limited warranty is valid only if you retain proof of purchase from

Oreck or an Oreck Authorized Retail Dealer for this product. If you

purchase this product from any other source, your purchase is “AS IS,”

which means Oreck grants you no warranty, and that you, not Oreck,

assume the entire risk of the quality and performance of this product,

including the entire cost of any necessary servicing or repairs of any

defects.

Oreck’s liability for damages to you for any costs whatsoever arising out

of this statement of limited warranty shall be limited to the amount paid for

this product at the time of original purchase, and Oreck shall not be liable

for any direct, indirect, consequential or incidental damages arising out of

the use or inability to use this product.

Some states do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitation or exclusion may not

apply to you.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT,

INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION

TO THE WARRANTY PERIOD, AND NO WARRANTIES, WHETHER

EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD.

Some states do not allow limitations on the duration of implied warranties,

so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state.

Troubleshooting Guide

WARNING: Unplug cord from electrical

outlet before servicing.

Whenever calling, please be sure to have your model and serial

number from data plate.

CALL CUSTOMER SERVICE HOT LINE

US: 1-800-989-3535 Canada: 1-888-676-7325

ALL OTHER SERVICING SHOULD BE DONE BY AN

ORECK AUTHORIZED SERVICE CENTER.

Especificaciones del producto

Marca:	Oreck
Categoría:	No categorizado
Modelo:	RinseAMatic XLS70
Color del producto:	Zwart
Pantalla incorporada:	Ja
Peso.:	1000 g
Ancho:	278 mm
Profundidad:	132 mm
Altura:	99.5 mm
red LAN:	Nee
Tipo de fuente de energía:	DC
Conexión para adaptador de red:	Ja
Interfaz:	Bedraad
Puerto RS-232:	1
Cantidad de puertos RJ-45:	1
Puertos de salida BNC:	4
Número máximo de cámaras admitidas:	4