OSD Audio SLS100 Manual de Usario

Lee a continuaciรณn ๐Ÿ“– el manual en espaรฑol para OSD Audio SLS100 (12 pรกginas) en la categorรญa controlador. Esta guรญa fue รบtil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Pรกgina 1/12
Volume Controls
Picking the right Volume Control for your application: Two basic types:
Transformer Type with Impedance matching capability. This covers more than 90
percent of all installs utilizing a basic manual Volume control. It adds flexibility to your
system by allowing you to control the volume level in a dedicated room. It does not add
gain to the system but actually attenuates or decreases the sound (you around turning
the sound down). During setup you set the source volume to the optimum level then the
volume control turns the sound down to almost inaudible levels. Most impedance
matching volume controls do not turn the sound off completely unless they are equipped
with an off switch (found on our model SVC205).
The Impedance matching feature allows for maximum flexibility when designing a
system featuring multiple speakers direct from either an amplifier/receiver or from a
Speaker selector connected to an Amplifier/Receiver. In all cases it important to select
the best components for you particular application. OSD features multiple options in
Volume Controls, Amplifiers and even Speaker Selectors.
We also offer two styles, a rotating knob and slider style version. Both styles are
shipped with a white, ivory and almond matching color Decora insert, knob and outer
plate (Slider control shipped with Slider knobs)
We also offer a Impedance matching model that features a two way A/B switch for
either two speakers from a single source or a single speaker with dual source option.
Here๎˜ƒis๎˜ƒan๎˜ƒexample๎˜ƒof๎˜ƒImpedance๎˜ƒmatching๎˜ƒapplication a๎˜ƒusing๎˜ƒ ๎˜ƒ
single๎˜ƒVolume๎˜ƒControl.๎˜ƒThe๎˜ƒOSD๎˜ƒAMP120 channel๎˜ƒis๎˜ƒ50๎˜ƒwatt๎˜ƒper๎˜ƒ ๎˜ƒ๎˜ƒ8๎˜ƒ
Ohm๎˜ƒAmplifier๎˜ƒthat๎˜ƒworks๎˜ƒbest๎˜ƒwhen๎˜ƒconnected๎˜ƒwith๎˜ƒan๎˜ƒ8๎˜ƒOhm๎˜ƒ
load.๎˜ƒThe๎˜ƒSVC100๎˜ƒVolume๎˜ƒcontrol๎˜ƒis๎˜ƒused๎˜ƒto๎˜ƒconnect๎˜ƒthe๎˜ƒtwo๎˜ƒpairs๎˜ƒof๎˜ƒ
6.5โ€๎˜ƒin speakers inโ€ceiling๎˜ƒ ๎˜ƒboth๎˜ƒrated๎˜ƒat๎˜ƒ ๎˜ƒ8 ohm.๎˜ƒWhen๎˜ƒwired๎˜ƒ ๎˜ƒparallel๎˜ƒ
the๎˜ƒimpedance๎˜ƒbecomes๎˜ƒ ๎˜ƒ ๎˜ƒ ฮฉ ๎˜ƒ ๎˜ƒ ฮฉ ๎˜ƒ ๎˜ƒ ๎˜ƒ4 Ohm (8 /2 = 4 ). The Impedance
matching๎˜ƒVC๎˜ƒjumper๎˜ƒswitch๎˜ƒis๎˜ƒset๎˜ƒto๎˜ƒ2X. This๎˜ƒ ๎˜ƒdoubles๎˜ƒthe๎˜ƒ ๎˜ƒ4 ohm๎˜ƒ
setting๎˜ƒback๎˜ƒto๎˜ƒthe that the๎˜ƒ ๎˜ƒ8 ohm๎˜ƒ ๎˜ƒis๎˜ƒoptimum๎˜ƒfor๎˜ƒ ๎˜ƒperformance๎˜ƒof๎˜ƒ
the๎˜ƒAMP120.๎˜ƒAttempting๎˜ƒto๎˜ƒconnect๎˜ƒtwo๎˜ƒpairs๎˜ƒof๎˜ƒ ๎˜ƒ8 ohm๎˜ƒspeakers๎˜ƒ
without๎˜ƒthe๎˜ƒvolume๎˜ƒcontrol๎˜ƒwould๎˜ƒmean๎˜ƒ ๎˜ƒ ๎˜ƒa 4 ohm๎˜ƒload๎˜ƒon๎˜ƒan๎˜ƒ
amplifier๎˜ƒthat๎˜ƒwould๎˜ƒcause๎˜ƒan๎˜ƒeventual๎˜ƒoverload๎˜ƒand๎˜ƒshut๎˜ƒdown๎˜ƒto๎˜ƒ
protect๎˜ƒitself.๎˜ƒ
Conversely๎˜ƒif๎˜ƒyou๎˜ƒselected๎˜ƒone our๎˜ƒof๎˜ƒ ๎˜ƒHigh๎˜ƒCurrent๎˜ƒ ๎˜ƒAmplifiers like๎˜ƒthe๎˜ƒ
AMP200๎˜ƒthat๎˜ƒis๎˜ƒstable๎˜ƒdown๎˜ƒto๎˜ƒ ๎˜ƒ ๎˜ƒa 2 ohm๎˜ƒload๎˜ƒyou๎˜ƒcould๎˜ƒwire pairs๎˜ƒ ๎˜ƒ3๎˜ƒ
of๎˜ƒ ๎˜ƒ8 ohm๎˜ƒspeakers in๎˜ƒ ๎˜ƒparallel impedance๎˜ƒ๎˜ƒwith๎˜ƒno๎˜ƒ ๎˜ƒmatching๎˜ƒneeded.๎˜ƒ
These๎˜ƒHigh๎˜ƒcurrent๎˜ƒ ๎˜ƒ ๎˜ƒ ๎˜ƒAmps are built to๎˜ƒhandle๎˜ƒ๎˜ƒthese๎˜ƒdemanding๎˜ƒloads๎˜ƒ
(actual๎˜ƒ2.6ฮฉfrom๎˜ƒthe๎˜ƒ ๎˜ƒ3 pairs) providing๎˜ƒ ๎˜ƒadditional๎˜ƒflexibility๎˜ƒin๎˜ƒyour๎˜ƒ
system๎˜ƒdesign.
Wired Parallel 8ฮฉ/2 =
16
R
Impedance Matching VC setting:
2X (2 x 4 Ohm = 8 Ohm)
8โ„ฆ
AMP120: 2 Channel 50 Watts (8 ohm)
AMP200: 2 Channel 125 Watts (4 ohm)

Especificaciones del producto

Marca: OSD Audio
Categorรญa: controlador
Modelo: SLS100

ยฟNecesitas ayuda?

Si necesitas ayuda con OSD Audio SLS100 haz una pregunta a continuaciรณn y otros usuarios te responderรกn




controlador OSD Audio Manuales

controlador Manuales

รšltimos controlador Manuales