Ozito GGK-030 Manual de Usario

Lee a continuación 📖 el manual en español para Ozito GGK-030 (6 páginas) en la categoría No categorizado. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
GLUE GUN
KIT
30W 11mm
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 220-240V ~ 50Hz
Pre-Heating Time: 5min
Heating Power: 200W
Operating Temp.: 1950
C
Glue Stick Diameter: 11mm
Glue Stick Length: 100mm
Weight: 0.3kg
GGK-030
STANDARD EQUIPMENT
Glue Gun
Glue Sticks
Kit Box
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: grinding discs,
carbon brushes, disc guard, flange.
WARNING
The following actions will result in the warranty being void.
If the tool has been operated on a supply voltage other
than that specified on the tool.
If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
Failure to perform maintenance as set out within the
instruction manual.
If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
Nozzles
0818
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
1. CHANGING NOZZLES
7 Glue Sticks x 4
8 Standard Nozzle
9 ProledNozzle
10 Long-Nosed Nozzle
ACCESSORIES
SETUP & PREPARATION
1 Nozzle Cover
2 Monitoring Window
3 Glue Stick Inlet
4 Glue Stick
5 Flow Control Trigger
6 Support Stand
GLUE GUN KIT
Installing New Nozzles
1 RemovetherubberNozzleCoverbypullingito󰀨thegluegun.
2 Unscrew the Nozzle by turning it anti-clockwise with a 13mm
spanner (not supplied).
Note: Inspect the rubber O-Ring on the Nozzle for damage before
ttingit.IftheO-Ringisworn,replaceitbeforecontinuingtouse
the Nozzle.
3 Fit the desired Nozzle onto the end of the glue gun and tighten it
by turning it clockwise.
4 Fit the Nozzle Cover back onto the new Nozzle.
The nozzle on this glue gun can be changed to better suit the task
at hand.
WARNING! ENSURE THE TOOL IS
SWITCHED OFF AND ALLOWED TO COOL
DOWN BEFORE PERFORMING ANY OF THE
FOLLOWING TASKS.
1 2 3 4
56
7 8 9 10
2. LOADING GLUE STICKS
OPERATION
3. CONTROLS
Installing Glue Sticks
1 Insert the Glue Stick into the Glue Stick Inlet.
2 Squeeze the Flow Control Trigger multiple times to push the
Glue Stick down.
Note: EnsuretheGlueSticksareheatedfullytoallowanevenow
of glue.
Theowrateoftheglueisdependentonhowmuchpressureis
applied to the Flow Control Trigger.
Flow Control Trigger
1 Squeeze the Flow Control Trigger to release the glue.
2 Tostoptheowofgluefromthegun,releasetheFlowControl
Trigger.
CAUTION! THE GLUE GUN WILL REMAIN
HOT FOR A FEW MINUTES AFTER USE. DO
NOT STORE THE GLUE GUN DIRECTLY AFTER
USE. ALLOW THE GLUE GUN TO COOL AND THE
GLUE TO SOLIDIFY BEFORE STORING.
WARNING! ALWAYS REST THE GLUE
GUN ON ITS SUPPLIED SUPPORT STAND
DURING AND AFTER USE.

Especificaciones del producto

Marca: Ozito
Categoría: No categorizado
Modelo: GGK-030

¿Necesitas ayuda?

Si necesitas ayuda con Ozito GGK-030 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Ozito Manuales

No categorizado Manuales

Últimos No categorizado Manuales