Ozito PXNGS-218 Manual de Usario

Ozito No categorizado PXNGS-218

Lee a continuación 📖 el manual en español para Ozito PXNGS-218 (2 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
STANDARD EQUIPMENT
WARNING! Read all safety warnings, instructions, illustrations and specifications
provided with this power tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious personal
injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of dust collection can reduce dust-related
hazards.
h) Do not let familiarity gained from frequent use of tools allow you to become complacent and
ignore tool safety principles. A careless action can cause severe injury within a fraction of a
second.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or remove the battery pack, if detachable,
from the power tool before making any adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe handling and control of the tool in unexpected
situations.
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
e) Do not use a battery pack or tool that is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
g) Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specified in the instructions. Charging improperly or at temperatures
outside the specified range may damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
b) Never service damaged battery packs. Service of battery packs should only be performed by
the manufacturer or authorized service providers.
Jammed Nail
1. Open the jam release latch to
check for any jammed nails
inside.
2. Open the jam release latch. (1)
Using a pair of pliers, carefully
remove any jammed nails. (2)
3. Check for any jammed nails in
the magazine.
Short Battery Runtime
Ensure the battery is properly charged. It will take 4-5 charging cycles
before the battery reaches optimum charge and run time.
PXNGS-218
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Firing Rate: 60/min
Magazine. Capacity: 100 x C1 Brad Nails
Nail Size: 18 Gauge 15-50mm
Weight: 2.8kg
ozito.com.au
0323
GENERAL POWER TOOL SAFETY WARNINGS
18GA BRAD FINISHING NAILER SAFETY WARNINGS
WARNING! This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the applianceby
a person responsible for their safety.
• Avoid using power tools for long periods of time without breaks. Vibration from tools can be
transmitted into your hands and arms.
• Where possible, use clamps or a vice to hold the workpiece. It is safer than using your hand.
• Always assume that the tool contains fasteners. Careless handling of the nailer can result in
unexpected firing of fasteners and personal injury.
• Do not point the tool towards yourself or anyone nearby. Unexpected triggering will discharge
the fastener causing an injury.
• Do not actuate the tool unless the tool is placed firmly against the workpiece. If the tool is not
in contact with the workpiece, the fastener may be deflected away from your target.
• Disconnect the tool from the power source when the fastener jams in the tool. While removing
a jammed fastener, the nailer may be accidentally activated if it is plugged in.
• Use caution while removing a jammed fastener. The mechanism may be under compression
and the fastener may be forcefully discharged while attempting to free a jammed condition.
• Do not use this nailer for fastening electrical cables. It is not designed for electric cable
installation and may damage the insulation of electric cables thereby causing electric shock or
fire hazards.
• Always use both hands to operate the tool. Your secondary hand should be used to press the
back of the tool firmly down onto the surface to be fastened.
• Do not point the LED into the eyes of humans or animals.
Cordless 18GA Brad Finishing
Nailer
500 x 50mm 18 Gauge
C1 Brad Nails
Hex Key
Belt Clip
MAINTENANCE
DESCRIPTION OF SYMBOLS
Warning
Ampere Hour
Regulatory Compliance Mark
(RCM)
Wear eye & ear protection
VVolts mm
Ah
/min
Direct Current
Millimeters
Revolutions or reciprocations
per minute
Read Instruction Manual
Power tools that are no longer usable should not be disposed
of with household waste but in an environmentally friendly
way. Please recycle where facilities exist. Check with your local
council authority for recycling advice.
Recycling packaging reduces the need for landll and raw
materials. Reuse of recycled material decreases pollution in the
environment. Please recycle packaging where facilities exist.
Check with your local council authority for recycling advice.
CARING FOR THE ENVIRONMENT
SPARE PARTS
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse.
For further information, or any parts not listed here,
visit www.ozito.com.au or contact Ozito Customer
Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: enquiries@ozito.com.au
(1)
(2)
18GA BRAD
FINISHING NAILER
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, VIC 3175, Australia.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
6. TROUBLESHOOTING
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! ALWAYS WEAR PROTECTIVE
EQUIPMENT WHEN REMOVING JAMMED NAILS.”
WARNING! THIS JAM RELEASE LATCH SHOULD
‘CLICK’ SHUT SECURELY BEFORE USE TO PREVENT
ACCIDENTAL MISFIRING.
WARNING! BEFORE CLEANING OR CARRYING OUT
ANY MAINTENANCE PROCEDURE, ENSURE THAT
THE BATTERIES HAVE BEEN REMOVED.
Cleaning
• Keep the ventilation slots of the tool clean at all times to ensure efcient
operation.
• After each use, blow air through the tool housing to ensure it is free from
all dust, dirt, etc. Build up of dust or dirt particles may cause the tool to
overheat and shorten the life of the tool.
• If the housing of the tool requires cleaning, do not use solvents. Use of a
cloth only is recommended.
• Never allow any liquid to get inside the tool, never immerse any part of
the tool into liquid.
Storage
When not in use, the tool should be stored in a dry, frost free location, keep
out of children’s reach.
Note: Ozito Industries will not be responsible for any damage or
injuries caused by repair of the tool by an unauthorised person or by
mishandling.
ELECTRICAL SAFETY
WARNING! When using electric tools basic safety precautions should always be followed to
reduce the risk of fire, electric shock and personal injury.
• Read the whole manual carefully and make sure you know how to switch the tool off in an
emergency, before operating the tool. Save these instructions and other documents supplied
with this tool for future reference.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the appliance.
• This appliance is compatible and only to be used with all batteries & chargers from the Ozito
PXC range. Refer to the PXC battery and charger manuals for information regarding charging,
use and storage.
• Always remove the battery from the tool: WARNING!
- when the batteries are to be charged,
- when the tool is left unattended,
- when the tool is being checked, cleaned, or having maintenance work done,
- when the tool is to be stored,
- or if the tool vibrates abnormally.
• Do not combine different types of batteries or new and used batteries.
• Do not use modified or damaged batteries.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Installing The Battery Pack
1. Slide the battery into the battery
seating until it clicks into place.
Removing The Battery Pack
1. Hold down the battery release
button and then slide the battery
out.
Seleting Nails
Accessories to suit this Staple Nail Gun can be purchased from Bunnings
Warehouse.
Nail Measurements
This tool accepts C1 Brad nails upto:
Note: These nail measurements are to scale, allowing you to measure the
nail, ensuring the correct nail size is used. This is also positioned
on the tool.
Loading Nails
This staple nailer only accepts 15-50mm 18 gauge C1 Brad nails. Other
types of nails could jam the unit. For best results, load a full row of nails
before use.
1. Press the cartridge latch down
and pull the magazine slider out
of the tool.
Note: Make sure the jam release latch is closed at all times except when
troubleshooting.
2. Insert a row of nails into the
opening behind the nose piece.
Be sure to align them to the
lower left corner of the cartridge.
Note: Ensure nails are positioned correctly in the cartridge and not
misaligned or inserted upside down.
3. Push the loaded magazine back
into the unit until it clips into
place.
Firing A Nail
The Safety Striker System is a two step process where a staple or nail will
only re when the safety striker tip is pushed against the material to be
fastened.
1. Push down on the back of the
tool to press the safety striker
guard and nose piece down onto
the worksurface to be fastened.
2. To re the staple nail gun,
squeeze the on/off trigger.
Note: Nails will be discharged
off centre, to the right side
of the nail gun. Test re on scrap piece of wood to get the exact
placement of the nail relative to the gun before use.
Note: The LED Wortlight glows when you press the On/Off Trigger and
the battery is attached to the tool.
Nail Firing Force Adjustment
Some jobs require a lighter touch than others; reducing the force that
staples or nails are red at reduces the chance of damaging thinner more
delicate surfaces.
Note: Always test the setting on a piece of scrap material after making
any adjustments.
1. To adjust the force of the nail
gun, turn the dial clockwise to
increase the nail depth.
2. Turn the dial anti-clockwise to
decrease the nail depth.
Note: If the nail is not fully
penetrating into the workpiece, rmly hold down the nail gun with
two hands while ring.
Selecting the Fire Type Adjustment Switch
The Fire Type Adjustment Switch helps to select the ring options between
a single shot and continuous shots.
1. Push the switch upwards for a
Single Shot adjustment. Place
the Nail gun with its Safety
Striker tip against the workpiece
ready for nailing. Pull the trigger
once and let it go again after
each shot.
2. Push the switch downwards for
a Continuous Shot adjustment.
Pull and hold the trigger with
its safety striker tip against the
workpiece. It will now shoot
every time the tip is depressed
until the trigger is released.
Note: To prevent the cordless nailer from overheating, it is suggested
to allow the tool to rest for 20mins after approx 500 shots in
continuous mode.
Note: Do not exceed a nail ring rate of 60 shots per minute. Thermal
protection would be activated if the motor overheated.
Note: If the nail goes in too far you can adjust the depth of penetration
with the depth adjustment dial
1. Fire Trigger
2. Sure Grip Handle
3. Battery Seating
4. Belt Clip
5. Magazine Release
6. Nail Magazine
7. Fire Type Adjustment Switch
8. Nail Level Indicator
9. LED Worklight
10. Safety Striker Cap
11. Jam Release Latch
12. Depth Adjustment Dial
13. Safety Striker Cap (extra)
This tool is compatible with all batteries & chargers from the Ozito PXC range.
CORDLESS 18GA BRAD
FINISHING NAILER
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY 4. CONTROLS2. NAIL SELECTION 3. LOADING THE CARTRIDGE
SETUP & PREPARATION OPERATION
(1)
(2)
(1)
(2)
15-50MM 18 GAUGE
C1 BRAD NAILS
32mm
15mm
25mm
20mm
40mm
50mm
2mm
1mm
12
13
4321
9
10
11
8
5
6
7
Fastener Common Applications
C1 Brad Nails Trim Moulding, Panelling, Picture Frames, Model Work,
Any Finish Nailing Application.
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! ALWAYS USE BOTH HANDS WHEN
USING THE TOOL.
PXNGS-218

Especificaciones del producto

Marca: Ozito
Categoría: No categorizado
Modelo: PXNGS-218

¿Necesitas ayuda?

Si necesitas ayuda con Ozito PXNGS-218 haz una pregunta a continuación y otros usuarios te responderán


No categorizado Ozito Manuales

Ozito

Ozito PXBSPS-180 Manual de Usario

6 Octubre 2024
Ozito

Ozito SSH-240 Manual de Usario

6 Octubre 2024
Ozito

Ozito PXTLS-905 Manual de Usario

3 Octubre 2024
Ozito

Ozito ADWH-913V Manual de Usario

2 Octubre 2024
Ozito

Ozito PXBLEK-418 Manual de Usario

24 Septiembre 2024
Ozito

Ozito DMC-1000 Manual de Usario

21 Septiembre 2024
Ozito

Ozito PXMFTS-018 Manual de Usario

19 Septiembre 2024
Ozito

Ozito PXBCSS-184 Manual de Usario

15 Septiembre 2024
Ozito

Ozito PXPPS-1820 Manual de Usario

14 Septiembre 2024
Ozito

Ozito PXNGS-218 Manual de Usario

14 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024