Ozito OPT-2033 Manual de Usario

Ozito No categorizado OPT-2033

Lee a continuación 📖 el manual en español para Ozito OPT-2033 (6 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/6
0
I
330MM PLANER THICKNESSER
0
I
330MM
PLANER THICKNESSER
THICKNESSER
330MM 2000W
INSTRUCTION MANUAL
SPECIFICATIONS
Mains Voltage: 230–240V ~ 50Hz
Motor: 2000W
No Load Speed: 9,100/min
Feed Speed: 6m/min
Max. Planing Width: 330mm
No. of Blades: 2
Planing Depth: 0-3mm
Planing Height: 6-160mm
Table Size: 330 x 290mm
Weight: 28kg
OPT-2033
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of If 36 months from the original date of purchase.
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ozito.com.au
Thicknesser
Push Stick, Blade Guide, Dust
Extraction Adaptor, 2 x Spanners,
Hex Key, Depth Adjustment Handle
& 4 x Feet
0622
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
0
I
330MM PLANER THICKNESSER
330MM WIDTH
2000W
PLANER THICKNESSER
UP
DOWN
Installing The Rubber Feet
1. Press the rubber feet into the
slots on the base of the unit.
Installing The Depth Adjustment Handle
1. Align the depth adjustment
handle with the protruding
shaft on the machine.
2. Tighten the screw and nut to
lock the handle into place.
1. Casing
2. Overload Reset Button
3. On/Off Switch
4. Material Support Rollers
5. Carbon Brush Cover
6. Depth Adjustment Handle
7. Handle Screw
8. Depth Guide
9. In-Feed Extension Table
10. Material Support Roller
11. Working Table
12. Material Support Roller
13. Dust Extraction Port
14. Dust Hood
THICKNESSER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
21 4 6 73 5
8910
13 1412
11
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
1. Turn the depth adjustment handle to
raise the blade and allow sufficient
space for the workpiece.
2. Place the workpiece below the blade
and lower the blade to the surface of the
workpiece.
3. Without adjusting the height, remove
the workpiece. Then lower the blade
to the desired planing depth.
4. Start the machine and gently feed the
workpiece into the machine using the
provided push stick.
WARNING! ALWAYS USE THE PUSH STICK PROVIDED
INSTEAD OF YOUR HANDS TO FEED THE WORKPIECE.
WARNING! DO NOT FORCE THE WORKPIECE INTO THE
THICKNESSER. THE MACHINE AUTOMATICALLY PULLS
THE WORKPIECE.
Planing Tips
• The length of the workpiece should not be less than 153mm
long.
• The thickness of workpiece should not be less than 6mm +
desired planing depth.
• Do not remove more than 3mm of material at a time.
• When working with hardwood, do not remove more than 2.5mm
at a time to avoid overloading the machine.
• Removing material gradually over several passes will result in a
smoother surface finish.
• The surface finish can be affected by the hardness, moisture
and fibre content of the timber. The blade sharpness, machining
direction and planing depth can also affect the surface finish.
• Feed material into the machine along the grain where possible
for best results.
• Always test any adjustments on scrap pieces of timber before
attempting on your workpiece.
• If not working in well ventilated areas, connect a dust extraction
unit, such as a vacuum cleaner, to the dust extraction port to
create a cleaner work environment. Use the dust extraction
adapter if required.
2. CONTROLS 3. PLANING
OPERATION
Adjusting The Planing Depth
The planing depth can be raised or lowered 1.5mm with every
full rotation of the handle. Always test the setting on a scrap
workpiece first.
1. Turn the depth adjustment
handle and use the planing
thickness guide to determine
the required height.
Switching The Tool On/Off
1. Press the “i” button to start the machine.
2. Press the “0” button to stop the machine.
Overcurrent Protection
If the planing material gets stuck, the tool is overloaded or there is
a short, the overcurrent protection will automatically shut off the
machine to prevent damage.
Follow the steps below to reset the machine after an overload.
1. Press the “0” button to ensure the machine
does not start up again unexpectedly, then
disconnect the power supply to the machine.
2. Push the overload reset button and allow
the machine to cool down.
3. Remove any jammed material or loose debris that may have
caused the overload.
4WARNING! DO NOT CONTINUE USING THE TOOL IF
THE OVERCURRENT PROTECTION ACTIVATES AGAIN
IMMEDIATELY ON RESTART.
0
I
0
I
0
I
330MM
PLANER THICKNESSER
0
I
330MM
PLANER THICK NESSER
330MM PLANER
THICKNESS
0
I
0
I
0
I
0
I
WARNING! NEVER PLACE HANDS NEAR THE CUTTER
HEAD UNLESS THE MACHINE IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY.
WARNING! NEVER USE THE THICKNESSER WITH
MATERIALS OTHER THAN TIMBER.
WARNING! WEAR EYE, EAR & BREATHING
PROTECTION TO AVOID PERSONAL INJURY.

Especificaciones del producto

Marca: Ozito
Categoría: No categorizado
Modelo: OPT-2033

¿Necesitas ayuda?

Si necesitas ayuda con Ozito OPT-2033 haz una pregunta a continuación y otros usuarios te responderán


No categorizado Ozito Manuales

Ozito

Ozito PXBSPS-180 Manual de Usario

6 Octubre 2024
Ozito

Ozito SSH-240 Manual de Usario

6 Octubre 2024
Ozito

Ozito PXTLS-905 Manual de Usario

3 Octubre 2024
Ozito

Ozito ADWH-913V Manual de Usario

2 Octubre 2024
Ozito

Ozito PXBLEK-418 Manual de Usario

24 Septiembre 2024
Ozito

Ozito DMC-1000 Manual de Usario

21 Septiembre 2024
Ozito

Ozito PXMFTS-018 Manual de Usario

19 Septiembre 2024
Ozito

Ozito PXBCSS-184 Manual de Usario

15 Septiembre 2024
Ozito

Ozito PXPPS-1820 Manual de Usario

14 Septiembre 2024
Ozito

Ozito PXNGS-218 Manual de Usario

14 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024