Ozito PXCJBLS-018U Manual de Usario

Ozito soplador de hojas PXCJBLS-018U

Lee a continuación 📖 el manual en español para Ozito PXCJBLS-018U (3 páginas) en la categoría soplador de hojas. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/3
BATTERY AND CHARGER SAFETY WARNINGS
We pay a great deal of attention to the design of every battery pack to ensure that we supply you with batteries which feature maximum
power density, durability and safety. The battery cells have a wide range of safety devices. Each individual cell is initially formatted and its
electrical characteristic curves are recorded. This data are then used exclusively to be able to assemble the best possible battery packs.
Despite all the safety precautions, caution must always be exercised when handling batteries. The following points must be
obeyed at all times to ensure safe use.
Safe use can only be guaranteed if undamaged cells are used. Incorrect handling can cause cell damage.
Important: Analyses conrm that incorrect use and poor care are the main causes of the damage caused by high performance
batteries.
Information about the battery
1. The battery pack supplied with your cordless tool is not charged. The battery pack has to be charged before you use the tool for the
rst time.
2. For optimum battery performance avoid low discharge cycles. Charge the battery pack frequently.
3. Store the battery pack in a cool place, ideally at 15°C and charged to at least 40%.
4. Lithium-ion batteries are subject to a natural ageing process. The battery pack must be replaced at the latest when its capacity falls to
just 80% of its capacity when new. Weakened cells in an aged battery pack are no longer capable of meeting the high power requirements
and therefore pose a safety risk.
5. Do not throw battery packs into an open re. There is a risk of explosion!
6. Do not ignite the battery pack or expose it to re
7. Exhaustive discharge will damage the battery cells. The most common cause of exhaustive Do not exhaustively discharge batteries.
discharge is lengthy storage or non-use of partly discharged batteries. Stop working as soon as the performance of the battery falls
noticeably or the electronic protection system triggers. Place the battery pack in storage only after it has been fully charged.
8. Overloads will quickly result in overheating and cell damage inside the battery housing Protect batteries and the tool from overloads.
without this overheating actually being apparent externally.
9. Replace batteries which have been dropped from a height of more than one meter or which have been Avoid damage and shocks.
exposed to violent shocks without delay, even if the housing of the battery pack appears to be undamaged. The battery cells inside the
battery may have suffered serious damage. In this respect, please also read the waste disposal information.
10. If the battery pack suffers overloading and overheating, the integrated protective cut-off will switch off the equipment for safety reasons.
Important. Do not press the ON/OFF switch any more if the protective cut-off has actuated. This may damage the battery pack.
11. Use only original battery packs. The use of other batteries may result in injuries, explosion and a re risk
Information on chargers and the charging process
1. Please check the data marked on the rating plate of the battery charger. Be sure to connect the battery charger to a power supply with
the voltage marked on the rating plate. Never connect it to a different mains voltage
2. Protect the battery charger and its cable from damage and sharp edges. Have damaged cables repaired without delay by a qualied
electrician.
3. Keep the battery charger, batteries and the cordless tool out of children’s reach.
4. Do not use damaged battery chargers.
5. Do not use the supplied battery charger to charge other cordless tools.
6. In heavy use the battery pack will become warm. Allow the battery pack to cool to room temperature before commencing with the
charging.
7. Do not over-charge batteries. Do not exceed the maximum charging times. These charging times only apply to discharged batteries.
Frequent insertion of a charged or partly charged battery pack will result in over-charging and cell damage. Do not leave batteries in the
charger for days on end.
8. Never use or charge batteries if you suspect that the last time they were charged was more than 12 months previously. There
is a high probability that the battery pack has already suffered dangerous damage (exhaustive discharge).
9. Charging batteries at a temperature below 10°C will cause chemical damage to the cell and may cause a re.
10. Do not use batteries which have heated during the charging process, as the battery cells may have suffered dangerous damage.
11. Do not use batteries which have suffered curvature or deformation during the charging process or which show other non-typical
symptoms (gassing, hissing, cracking,…)
12. Never fully discharge the battery pack (recommended depth of discharge max. 80%) A complete discharge of the battery pack will lead
to premature ageing of the battery cells.
13. Never charge the batteries unsupervised.
Protection from environmental inuences
1. Wear suitable work clothes. Wear safety goggles.
2. . Moisture and rain can cause dangerous cell damage. Protect your cordless tool and the battery charger from moisture and rain
3. Do not use the cordless tool or the battery charger near vapours and inammable liquids.
4. Use the battery charger and cordless tools only in dry conditions and an ambient temperature of 10-40°C.
5. Do not keep the battery charger in places where the temperature is liable to reach over 40°C. In particular, do not leave the battery
charger in a car that is parked in the sunshine.
6. Overloads, over-charging and exposure to direct sunlight will result in overheating and cell Protect batteries from overheating.
damage. Never charge or work with batteries which have been overheated – replace them immediate if possible.
7. Store the charger and your cordless tool only in dry places with an Storage of batteries, battery chargers and cordless tools.
ambient temperature of 10-40°C. Store your lithium-ion battery pack in a cool, dry place at a temperature of 10-20°C. Protect them from
humidity and direct sunlight. Only place fully charged batteries in storage (charged at least 40%).
8. Prevent the lithium-ion battery pack from freezing. Battery packs which were stored below 0°C for more than 60 minutes must be
disposed of.
9. When handling batteries beware of electrostatic charge: Electrostatic discharges cause damage of the electronic protection system
and the battery cells. Avoid electrostatic charging and never touch the battery poles.
Rechargeable batteries and cordless electric machines and tools contain materials that are potentially harmful to the environment. Never
place any cordless electric machines or tools in your household refuse. When cordless electric machines or tools become defective
or worn, remove the rechargeable batteries and return them to iSC GmbH (address: Eschenstrasse 6, D-94405, Germany). If the
rechargeable batteries cannot be removed, return the complete cordless machine or tool. You can then be sure that the equipment will be
correctly disposed of by the manufacturer.
When shipping or disposing of batteries and cordless tools, always ensure that they are packed individually in plastic bags to
prevent short circuits and res.
BRUSHLESS
JET BLOWER
ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Voltage: 18V x 2
No Load Speed: 11,000 - 21,000/min
Max. Air Speed: 150km/h
Max. Air Volume: 810m/h
Protection Class: III
Weight: 2.5kg
PXCJBLS-018U
WHAT’S IN THE BOX
Brushless Jet Blower
Blower Nozzle
TROUBLESHOOTING
WARRANTY
SPARE PARTS ozito-diy.co.uk
BLOWER SAFETY WARNINGS
GENERAL POWER TOOL SAFETY WARNINGS
ELECTRICAL SAFETY
1017
Problem Cause Remedy
Blower is not
starting
Battery is low in charge. Charge battery
Battery not inserted
properly.
Insert battery pack correctly.
Blower is not
operating at
full capacity
Variable speed set low. Inspect variable speed dial and increase as
necessary.
Motor stops
while blowing
Battery has no power. Charge battery.
Read the directions for use before operating the tool.
Store the battery only in dry rooms with an ambient temperature
of +10 c to +40 c. Place only charged batteriers in storage (charged¼ ¼
at least 40%).
Keep all other persons awa .y from the danger zone
Wear goggles and ear muffs.
Safety class III / Safety extra-low voltage.
Safety class II
Do not use the tool in rain
or snow. Do not expose the
tool to wet conditions.
For use in dry rooms only.
• Always wear adequate protective clothing when operating the blower to avoid injuries to face, eyes,
hands, feet, head or hearing. Use safety glasses or a face shield, high boots or sturdy shoes, long
trousers, work gloves, a hard hat and ear defenders.
• Do not start the tool when it is upside down or when it is not in the operating position.
• Switch the motor off and remove the battery when the tool is not being used, left unattended, being
cleaned or being moved from one place to another.
• Do not operate the tool near people, especially children or pets. Turn it off if they get too close.
Maintain a safe distance of at least 5m from other people when using the tool.
• Never direct the blower direction nozzle towards bystanders or pets. Never blow debris in the direction
of bystanders or pets. The operator is responsible for accidents or hazards occurring to other people or
their property.
• Do not handle the battery or the tool with wet hands and do not use the tool in
the rain.
• Keep all the air intakes and the blower tube free of dust, lint, hair and other material that may cause a
reduction in air ow.
• Keep a balanced and stable stance while using the tool. Do not switch on the tool in enclosed or
poorly ventilated spaces or in the presence of inammable and/or explosive substances such as
liquids, gasses and powders.
• Do not get distracted and always concentrate on what you are doing. Use common sense. Never
operate the tool when you are tired, sick or under the inuence of alcohol or other drugs.
• Do not operate this appliance with long loose hair or loose tting jewellery. Tie long loose hair back
and remove loose tting jewellery.
• Only operate the tool during broad daylight or with adequate articial light.
• When the tool is not in use, store it in a dry place and out of reach of children.
• Only use the tool according to the instructions given in this manual.
• Check regularly that the screws are tight.
WARNING! When servicing, use only identical replacement parts. Use of any other parts may
create a hazard or cause product damage. To ensure safety and reliability, all repairs should be
performed by a qualied service technician.
WARNING! This appliance is not intended for use by young or inrm persons unless supervised
by a responsible person to ensure that they can use the appliance safely. Young children should be
supervised to ensure that they do not play with the appliance.
DESCRIPTION OF SYMBOLS
Shoulder Strap
• Keep air intake clean and air vents free of debris to avoid overheating the motor.
• Do not use cleaning agents to clean the plastic parts of the tool.
A mild detergent on a damp cloth is recommended. Water must never come into contact with
the tool.
• If the blower vibrates abnormally, stop motor immediately. Abnormal vibration usually indicates
a mechanical problem continued operation could lead to injury or damage.
• No lubrication is necessary as the motor is equipped with lifetime-lubricated bearings.
WARNING! ALWAYS ENSURE THE TOOL HAS
COMPLETELY STOPPED AND THE BATTERIES ARE
REMOVED PRIOR TO ANY MAINTENANCE.
Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of
the jet blower by an unauthorised person or by mishandling of the blower. This tool is designed for
DIY use - use in commercial or industrial environments will void the warranty.
MAINTENANCE
OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
All of our products undergo strict quality checks to ensure that they reach you in perfect
condition. In the unlikely event that your device develops a fault, please contact our service
department at the address shown on this guarantee card. You can also contact us by
telephone using the customer service number shown. Please note the following terms under
which guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the manufacturer
mentioned below promises to buyers of its new products in addition to their statutory
guarantee claims are not affected by this guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or manufacturing faults on
a product which you have bought from the manufacturer mentioned below are limited to
either the rectication of said defects on the product or the replacement of the product,
whichever we prefer.
Please note that our devices are not designed for use in commercial, trade or professional
applications. A guarantee contract will not be created if the device has been used by
commercial, trade or industrial business or has been exposed to similar stresses during the
guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly instructions or due to
incorrect installation, a failure to follow the operating instructions (for example connecting
it to an incorrect mains voltage or current type) or a failure to follow the maintenance and
safety instructions or by exposing the device to abnormal environmental conditions or by
lack of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example overloading the
device or the use or unapproved tools or accessories), ingress of foreign bodies into the
device (such as sand, stones or dust, transport damage), the use of force or damage caused
by external forces (for example by dropping it).
- Damage to the device or parts of the device caused by normal or natural wear or tear or by
normal use of the device.
4. Your Product is guaranteed for a period of 60 months from the original date of purchase
and is intended for DIY (Do It Yourself) use only. Lithium Ion batteries and chargers are
covered by a 12 month warranty. Warranty excludes consumable parts. Guarantee claims
should be submitted before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the guarantee period.
The original guarantee period remains applicable to the device even if repairs are carried
out or parts are replaced. In such cases, the work performed or parts tted will not result
in an extension of the guarantee period, and no new guarantee will become active for the
work performed or parts tted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO
THE PLACE OF PURCHASE WITH YOUR REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts, consumables and
missing parts as set out in the service information in these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
Spare parts can be ordered from the Special Orders Desk at your local
Bunnings Warehouse or Homebase store.
For further information, or any parts visit
www.ozito-diy.co.uk or contact Ozito Customer Service:
Great Britain: 0151 294 4488
Ireland: 1850 882711
E-mail: info@ozito-diy.co.uk
WARNING! When using mains-powered tools, basic safety precautions, including
the following, should always be followed to reduce risk of fire, electric shock, personal
injury and material damage.
Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool.
Save these instructions and other documents supplied with this tool for future reference.
Before you connect the charger to the mains supply make sure that the data on the rating plate are identical to the mains data.
This tools charger is double insulated therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.
Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for
added protection against injury resulting from a possible electrical insulation failure within the tool.
The power supply for this products charger should be protected by a residual current device (rated at 30mA
or less). A residual current device reduces the risk of electric shock.
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equip-
ment and its implementation in national laws, old electric power tools have to be separated
from other waste and disposed of in an environment-friendly fashion, e.g. by taking to a
recycling depot.
Recycling alternative to the return request: As an alternative to returning the equipment to the
manufacturer, the owner of the electrical equipment must make sure that the equipment is
properly disposed of if p1-he no longer wants to keep the equipment. The old equipment can be
returned to a suitable collection point that will dispose of the equipment in accordance with
the national recycling and waste disposal regulations. This does not apply to any accessories or
aids without electrical components supplied with the old equipment.
This consignment contains lithium-ion batteries. In accordance with special provision 188 this
consignment is not subject to the ADR regulations. Handle with care. Danger of ignition in case
of damage to the consignment package. If the consignment package is damaged: Check and if
necessary repackage. For further information contact: 0049 1807 10 20 20 66 (xed network
14 ct/min, mobile phone max. 42 ct/min) Outside Germany charges will apply instead for a
regular call to a landline number in Germany.
TECHNICAL DATA
LWA sound power level ..............................97.2 dB
LPA sound pressure level ...........................85.2 dB
K uncertainty ............................................1.5 dB
Vibration ah ............................................. ≤ 2.5 m/s²
K uncertainty ............................................1.5 m/s²
The machine may exceed 85.2 dB (A). The operator will require noise protection measures if
this is the case.
The specied vibration value was established in accordance with a standardized testing
method. It may change according to how the electric equipment is used and may exceed the
specied value in exceptional circumstances.
The specied vibration value can be used to compare the equipment with other electric power
tools.
The specied vibration value can be used for initial assessment of a harmful effect.
Keep the noise emissions and vibrations to a minimum.
• Only use appliances which are in perfect working order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
WARNING! “Read all safety warnings, instructions, illustrations and specications
provided with this power tool.” Failure to follow the warnings and instructions may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase
the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do
not use a power tool while you are tired or under the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools may result in serious personal injury.
b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your
nger on the switch or energising power tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of dust collection can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of tools allow you to become complacent and
ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application. The correct power tool
will do the job better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from
the power tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
e. Maintain power tools and accessories. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
5. Service
a. Have your power tool serviced by a qualied repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
Please note that the following parts of this product are subject to normal or natural wear and
that the following parts are therefore also required for use as consumables.
* Not necessarily included in the scope of delivery!
Category Example
Wear parts* Battery
Consumables
Missing parts
Declaration of Conformity
SERVICE INFORMATION
Gao/Product-ManagementWeichselgartner/General-Manager
explains the following conformity according to EU directives and norms for
the following product
Brushless Jet Blower PXCJBLS-018U (Ozito)
2014/29/EU
2005/32/EC_2009/125/EC
2014/35/EU
2006/28/EC
X 2014/30/EU
2014/32/EU
2014/53/EC
2014/68/EU
90/396/EC_2009/142/EC
89/686/EC_96/58/EC
X 2011/65/EU
X 2006/42/EC
Annex IV
Notied Body:
Notied Body No.:
Reg. No.:
X 2000/14/EC_2005/88/EC
X Annex V
Annex VI
Noise: measured LWA = 97,2 dB (A); guaranteed L
WA = 100 dB (A)
P = KW; L/Ø = cm
Notied Body:
2012/46/EU
Emission No.:
Standard references: EN 60335-1; EN 50636-2-100; EN 62233
EN 55014-1; EN 55014-2
Landau/Isar, den 01.08.2017
First CE: 17 Archive-File/Record: NAPR016843
Art.-No.: 30.000.89 I.-No.: 11017 R. GehardDocuments registrar:
Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar
ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar
Battery & Charger
sold separately
Battery protection system
The tool is equipped with the battery protection system, which helps to ensure a long service
life.
The output power automatically cuts off during operation when the tool and/or battery are
placed under the following situations:
• When the tool is overloaded:
If this occurs, release the trigger switch and remove causes of overload, then pull the
switch trigger again to restart.
• When the remaining battery capacity becomes low:
Recharge the battery pack.
Note: The battery protection system does not in any way damage the tool.
Note: The indicated capacity may be lower than the actual level during use or immediately
after using the tool.
LED lights do not illuminate on charger
Check the charging adaptor is securely plugged into the wall outlet.
Check the battery is rmly connected to the charging cradle.
Check that the charging jack is securely connected to the charging cradle.
Sparking visible through the housing air vents
A small amount of sparking may be visible through the housing vents. This is normal and
does not indicate a problem.
ONLINE MANUAL
Scan this QR Code with your mobile device
to take you to the online manual.
BATTERY & CHARGER (sold separately)
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
KNOW YOUR PRODUCT
1. BEFORE USE
3. BATTERY & CHARGING (SOLD SEPARATELY)
2. ASSEMBLY
SETUP & PREPARATION OPERATION
1. Slide the nozzle over the
blower outlet, aligning the
blower nozzle slot with the
tab on the outlet of the jet
blower.
1. Align the ribs of the battery with
the recess in the jet blower.
1. Press and hold the battery
release tab to release the
battery.
2. Rotate the blower nozzle to lock
in place.
2. Slide the battery in so
that it clicks into place.
1. Squeeze the on/off trigger to
start. Motor will start after
short delay.
2. To stop operation, release the
on/off trigger.
2. Slide the battery out.
Fitting the Jet Blower Nozzle
Inserting a Battery into the Jet Blower
Removing a Battery from the Jet Blower
Switching On and Off
PXCJBLS-018U
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND BATTERIES DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Blowing
BRUSHLESS JET BLOWER
1 2 3 4
1. Blow Nozzle
2. Variable Speed Dial
3. Turbo Boost Button
4. ON/OFF Trigger
5. Handle
6. Battery Seating
5. CONTROLS & OPERATION
WARNING!: DO NOT SWITCH THE JET BLOWER ON
IN ENCLOSED OR POORLY VENTILATED SPACES
OR IN THE PRESENCE OF FLAMMABLE AND/OR
EXPLOSIVE LIQUIDS, GASES AND POWDERS.
WARNING! DO NOT USE ANY ATTACHMENTS
OR ACCESSORIES NOT RECOMMENDED BY THE
MANUFACTURER OF THIS PRODUCT, AS IT CAN
RESULT IN SERIOUS PERSONAL INJURY.
ACCESSORIES
7. Shoulder Strap
1. To increase the air speed
rotate the dial to the
“MAX”setting.
2. To lower the air speed
rotate the dial to the
“LOW” setting.
Variable Speed Dial
1. Press Turbo Boost Button
for maximum air speed.
Turbo Speed Button
2. Release button to return
to normal air speed.
Fitting the Shoulder Strap
Note: Always use 2 batteries of the same capacity and same charge state with
the jet blower.
1. Ensure the shoulder strap is
clipped onto the top of the jet
blower.
2. To unclip the jet blower, press
either side of the buckle.
Note: To use the shoulder strap simply slide the strap over your shoulder so
that some of the weight of the jet blower can be taken by your shoulder.
5 6
7
Hold the blower rmly, squeeze
the on/off trigger, point the jet
of air in front of you and move
forward slowly. Move the blower
from side to side, with the nozzle
several inches above the ground.
Be careful where you point the
jet of air as it can move heavy
material and cause injury or
damage to bystanders.
Note: Be aware of other people
and animals in the area where
you are to be operating the Jet
blower.
Note: Avoid collisions with hard objects which could damage your machine.
Proper Use
The cordless jet blower is designed to handle only foliage and garden refuse
such as grass and small branches. Any other use is prohibited.
The equipment is to be used only for its prescribed purpose. Any other use is
deemed to be a case of misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial,
trade or industrial applications. Our warranty will be voided if the machine is
used in commercial, trade or industrial businesses or for equivalent purposes.
Items Supplied
Please check that the article is complete as specied in the scope of delivery.
If parts are missing, please contact our service centre or the sales outlet
where you made your purchase at the latest within 5 working days after
purchasing the product and upon presentation of a valid bill of purchase.
Also, refer to the warranty table in the service information at the end of the
operating instructions.
¥ Open the packaging and take out the equipment with care.
¥ Remove the packaging material and any packaging and/or transportation braces (if
available).
¥ Check to see if all items are supplied.
¥ Inspect the equipment and accessories for transport damage.
¥ If possible, please keep the packaging until the end of the guarantee period.
DANGER! THE EQUIPMENT AND PACKAGING
MATERIAL ARE NOT TOYS. DO NOT LET CHILDREN
PLAY WITH PLASTIC BAGS, FOILS OR SMALL
PARTS. THERE IS A DANGER OF SWALLOWING OR
SUFFOCATION!
CAUTION!
Residual Risks
Even if you use this electric power tool in accordance with instructions,
certain residual risks cannot be rules out. The following hazards may arise in
connection with the equipment’s construction and layout:
1. Lung damage if no suitable protective dust mask is used.
2. Damage to hearing if no suitable ear protection is used.
3. Health damage caused by hand-arm vibrations if the equipment is used
over a prolonged period or is not properly guided and maintained.
4. INSERTING & REMOVING BATTERIES
CAUTION: THE CHARGER FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS).
The purchased battery will be shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use of the tool)
for the battery to reach its optimum performance / runtime.
1. Connect the charger into a mains power outlet.
4. The charger LED will illuminate
red signifying that the battery is
charging.
3. With the charger sitting on a at
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the charger
ensuring a rm connection.
2. The charger LED will ash green
showing power is being supplied
to the charger.
5. The charger LED will illuminate
green once the battery is charged.
Charging your lithium ion battery - Fast Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Flashing) Battery is charging (low charge)
RED (Illuminated) Battery is charging (mid charge)
GREEN (Illuminated) Battery is 85% - 100% charged and ready for use.
BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing) Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.
Battery Charge Indicator
The purchased battery is equipped with a
battery charge indicator to show the state of
the battery charge.
Press the charge indicator button and look to
see which LED lights.
Battery requires
immediate charging
Low state of charge, requires charging soon.
Mid state of charge
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of charge.
1. Connect the charger into a mains power outlet.
4. The charger LED will illuminate red signifying that the battery is charging.
3. With the battery sitting on a at
surface, align the raised ribs on the
battery with the recess in the charger
and slide onto the battery ensuring a
rm connection.
2. The charger LED will ash green
showing power is being supplied
to the charger.
5. When removing the charger from the
battery, rst press the battery release
tab, then slide the charger from its
position.
Charging your lithium ion battery - Eco Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Illuminated) Battery is charging (low charge)
GREEN (Illuminated) Battery is charged and ready for use.
RED (Flashing) Battery or Charger fault
RED & GREEN (Flashing) Battery pack is too hot or too cold (remove battery from
charger and store at room temperature 20ºC. Insert
battery again when at correct charging temperature). If
this happens again, the battery is defective and needs
to be replaced.

Especificaciones del producto

Marca: Ozito
Categoría: soplador de hojas
Modelo: PXCJBLS-018U

¿Necesitas ayuda?

Si necesitas ayuda con Ozito PXCJBLS-018U haz una pregunta a continuación y otros usuarios te responderán


soplador de hojas Ozito Manuales

Ozito

Ozito OBL-0185 Manual de Usario

4 Octubre 2024
Ozito

Ozito PXBVS-3624 Manual de Usario

14 Septiembre 2024
Ozito

Ozito PXJBGK-4020 Manual de Usario

14 Septiembre 2024
Ozito

Ozito PXBUVK-4025 Manual de Usario

13 Septiembre 2024
Ozito

Ozito PXCJBLS-018U Manual de Usario

21 Agosto 2024
Ozito

Ozito PXCJBLS-0182U Manual de Usario

17 Agosto 2024

soplador de hojas Manuales

Últimos soplador de hojas Manuales

Einhell

Einhell GC-CL 18/1 Li E-Solo Manual de Usario

12 Octubre 2024
Makita

Makita DUB183Z Manual de Usario

8 Octubre 2024
Stihl

Stihl BGA 56 Manual de Usario

3 Octubre 2024
Sun Joe

Sun Joe SBJ597E Manual de Usario

28 Septiembre 2024
Ryobi

Ryobi One+ RY18BLXB Manual de Usario

27 Septiembre 2024
Ryobi

Ryobi RY40451 Manual de Usario

24 Septiembre 2024
Hitachi

Hitachi RB 24EAP Manual de Usario

20 Septiembre 2024
Einhell

Einhell RG-EL 1800 E Manual de Usario

19 Septiembre 2024
Anova

Anova E20SB Manual de Usario

19 Septiembre 2024
Einhell

Einhell Royal LS 2500 E Manual de Usario

19 Septiembre 2024