Ozito PXCSS-165 Manual de Usario

Ozito máquina de aserrar PXCSS-165

Lee a continuación 📖 el manual en español para Ozito PXCSS-165 (8 páginas) en la categoría máquina de aserrar. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

STANDARD EQUIPMENT

PXCSS-165

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 18V

No Load Speed: 4,200/min

Blade Diameter: 165mm (6.5”)

Blade Teeth: 24TCT

Blade Bore: 20mm

Depth of Cut: 54mm @ 90°

35mm @ 45°

Weight: 2.59kg

ozito.com.au

1121

Circular Saw

Rip Fence

Hex Key

165MM

CIRCULAR SAW

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other than that specied

on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes

consumable parts.

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

1. Spindle Lock

2. Hex Key Storage

3. Worklight

4. Bevel Locking Lever

5. Dust Port

6. Rear Handle

7. Lock-Off Button

8. Blade

9. Front Handle

10. Rip Fence Locking Knob

11. Cutting Guide Notch

12. Upper Blade Guard

13. Lower Blade Guard

14. Blade Bolt

15. On/Off Trigger

16. Blade Guard Lever

17. Depth locking Lever

18. Battery Seating

This tool is compatible with all batteries & chargers from the Ozito PXC range.

For optimal performance, we recommend the use of a 3.0Ah battery or higher to

operate this PXC tool.

CORDLESS CIRCULAR SAW

BATTERY & CHARGER

KNOW YOUR PRODUCT

1. FITTING THE BATTERY & GUIDE

SETUP & PREPARATION

65 7 98 10

111214161718 15 13

Installing & Removing The Battery Pack

1. Slide the battery into the tool

base until it clicks into place.

2. To remove the battery,

hold down the battery

release button and then

slide the battery out.

Attaching The Rip Fence

The rip fence allows you to perform straight cuts with ease.

WARNING! ENSURE THE TOOL IS SWITCHED

OFF AND THE BATTERY IS REMOVED BEFORE

PERFORMING ANY OF THE FOLLOWING TASKS.

1. Insert the rip fence through the

rip fence slots in the front of the

baseplate.

2. Once the desired width is set,

tighten the locking knob to

secure in place.

3. To remove, loosen the locking

knob and then slide the

rip fence out.

2. FITTING A BLADE 3. CUTTING ADJUSTMENTS

Changing The Blade

This tool is for wood cutting only and is not recommended for use with

abrasive wheels or masonry/diamond cutting wheels. Only use Ø165mm

wood cutting blades.

1. Press and hold the spindle lock.

2. Use the hex key to rotate the

blade until the spindle lock

engages. Remove the blade bolt

and outer blade ange.

3. Retract the lower blade guard

fully.

4. Remove and replace the blade.

Ensure that the arrows on the

blade point in the same direction

as the arrow on the upper blade

guard.

5. Replace the outer blade ange and blade bolt.

WARNING! ONLY USE BLADES WITH THE CORRECT

SIZE AND SHAPE OF BORE HOLE. ONLY USE THE

FLANGE AND BOLT SUPPLIED WITH THE TOOL.

6. Hold down the spindle lock and tighten

the blade bolt with the hex key.

WARNING! ENSURE THE TOOL IS SWITCHED

OFF AND THE BATTERY IS REMOVED BEFORE

PERFORMING ANY OF THE FOLLOWING TASKS.

WARNING! INSPECT THE BLADES BEFORE EACH

USE. REPLACE IF DAMAGED.

WARNING! ALWAYS WEAR GLOVES WHEN

HANDLING THE BLADE AS IT IS VERY SHARP AND

CAN CUT YOU WHEN IT IS NOT MOVING.

Depth Adjustment

Depth should be adjusted so that no more than one tooth is protruding

through the timber. This helps to minimise splintering.

1. Loosen the depth adjustment

lever.

Note: Do not push the lever

behind the depth adjustment scale.

2. Hold the baseplate down with

one hand. Raise or lover the saw

to the desired depth.

3. Tighten the depth adjustment

lever to secure in place.

WARNING! ENSURE THE TOOL IS SWITCHED

OFF AND THE BATTERY IS REMOVED BEFORE

PERFORMING ANY OF THE FOLLOWING TASKS.

Especificaciones del producto

Marca:	Ozito
Categoría:	máquina de aserrar
Modelo:	PXCSS-165
Color del producto:	Grey, Silver
Temporizador:	Ja
Amable:	Digitaal
Interruptor encendido / apagado:	Ja
Unidad de medida de temperatura:	F, °C
Número soportado de baterías/baterías:	2
Material:	Roestvrijstaal
Destinado a:	Oven
Interno:	Nee
Rango de temperatura (TT):	0 - 200 °C
Baterias-incluidas:	Ja
Tecnología de batería:	Alkaline
Tipo de Batería:	AAA
Rango-de-temperatura-(TT):	32 - 392 °F