Ozito PXHDK-400 Manual de Usario

Ozito No categorizado PXHDK-400

Lee a continuación 📖 el manual en español para Ozito PXHDK-400 (12 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

Battery & Charger

sold separately

SPECIFICATIONS

Input: 18V

Chuck Size: ø2 - 13mm Keyless

Chuck Material: Metal

No Load Speed: 0-400 / 0-1,500/min

Impact Rate: 0-6,400 / 0-24,000bpm

Torque Setting: 21

Max. Torque: 40Nm

Drilling Capacities: 32mm (Timber)

10mm (Masonry)

13mm (Metal)

Weight: 1.12kg

HAMMER DRILL

INSTRUCTION MANUAL

ozito.com.au

PXHDS-180

STANDARD EQUIPMENT

Cordless 13mm

Hammer Drill

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

0818

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other than that specied

on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes

consumable parts.

KNOW YOUR PRODUCT SETUP & PREPARATION

1 Keyless Chuck

2 Torque Adjustment Collar

3 Function Collar

4 Variable Speed Trigger

5 LED Light

6 Battery Seating

7 Belt Clip

8 Forward/ Reverse Lever

9 Gear Selector

HAMMER DRILL

1 2 3 4 5 6 7 8 9

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to the

online manual.

BATTERY & CHARGER

This tool is compatible with all battery and chargers from the Ozito

Power X Change Range.

1. BATTERY INSTALLATION

Installing the Battery Pack

1 Slide the battery into the drill base until it clicks into place.

Removing the Battery Pack

1 Hold down the battery

release button.

2 Slide the battery out.

2. KEYLESS CHUCK

REV

FWD

3. CONTROLS

Forward/ Reverse Lever

Variable Speed Trigger

1 For forward rotation, push the fwd/rev lever towards the left side of the drill. For

reverse rotation push FWD/REV lever to the right.

1 To start drilling squeeze the variable

speed trigger.

2 To stop drilling release the trigger.

Note: The more the variable speed trigger is depressed, the faster the drill bit will

rotate.

Installing a Drill Bit

Removing a Drill Bit

1 Open the chuck by rotating the

chuck collar anti-clockwise and

remove the drill bit.

2 Insert the drill bit,

making sure it

is centred in the

chuck.

4 Pull on the bit to

ensure it is rmly

secured.

CAUTION: TO REDUCE THE RISK OF INJURY WE

RECOMMEND THE USE OF GLOVES WHEN HANDLING

DRILL BITS.

1 Rotate the chuck collar anti-

clockwise to open the chuck

3 Tighten the chuck by turning it

clockwise.

WARNING! ENSURE THE TOOL IS SWITCHED OFF AND

THE BATTERY IS REMOVED BEFORE PERFORMING ANY

OF THE FOLLOWING TASKS.

Especificaciones del producto

Marca:	Ozito
Categoría:	No categorizado
Modelo:	PXHDK-400
Color del producto:	Grey, Silver
Peso.:	620 g
Ancho:	142.2 mm
Profundidad:	93.9 mm
Altura:	69.2 mm
Peso del embalaje:	1100 g
Ancho del embalaje:	273 mm
Empaquetadura en profundidad:	140 mm
Altura del embalaje:	82 mm
Sistemas operativos móviles compatibles:	Android 9.0
Instrucciones:	Ja
Capacidad del acumulador/batería:	3700 mAh
Tecnología de conectividad:	Bedraad
Tipo de fuente de energía:	Batterij/Accu
Cables suministrados:	USB
Energía promedio:	3 W
Consumo de energía (máx.):	4.8 W
Soporta Windows:	Ja
Número:	1
Impedancia:	4 Ohm
Conexión:	USB-C
Soporta el sistema operativo Mac:	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 10.15.3 Catalina, Mac OS X 11.0 Big Sur, Mac OS X 12.0 Monterey
Rango de frecuencia:	150 - 15000 Hz
Sensibilidad:	76 dB
Tipo de dirección del micrófono:	Omnidirectioneel
Sensibilidad del micrófono:	-38 dB
Distorsión Armónica Total (THD):	1 procent
Frecuencia del micrófono:	100 - 10000 Hz
Temperatura de funcionamiento (TT):	-10 - 45 °C
Humedad relativa de funcionamiento (VV):	0 - 90 procent
Tipo-producto:	Luidspreker
Micrófono Distorsión Armónica Total (THD):	0.15 procent