Ozito PXPHTS-1845 Manual de Usario
Ozito
cortasetos
PXPHTS-1845
Lee a continuación 📖 el manual en español para Ozito PXPHTS-1845 (8 páginas) en la categoría cortasetos. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/8
CORDLESS POLE
HEDGE TRIMMER
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Cutting Speed: 1,400 SPM
Cutting Capacity: Ø16mm max.
Cutting Length: 410mm max.
Blade Length: 450mm
Extension Pole: 830mm
Length Min/Max.: 2.07/2.90mm
Weight: 3.50kg
PXPHTS-1845
STANDARD EQUIPMENT
Trimmer Head
ozito.com.au
Extension Tube
WARRANTY
0323
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: bearings, blades,
blade cover.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria 3175, Australia.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
Blade Cover
Rear Handle Tube
Shoulder Strap
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
The pole hedge trimmer can be used either with or without the
extension tube.
Fitting the Tubes
WARNING! ENSURE THE MACHINE IS SWITCHED OFF
AND BATTERY IS DISCONNECTED BEFORE PERFORMING
ANY OF THE FOLLOWING TASKS.
ACCESSORIES
1
9
2
3
4
14
6
7
8
1. Blade
2. Trimmer Head
3. Pivoting Head Button
4. Lock Nut
5. Extension Tube
6. Top Handle
7. Shoulder Strap Retainer
8. Sure Grip Handle
9. Rear Handle Release x 2
10. Safety Switch
11. Battery Seating
12. On/Off Trigger
13. Blade Cover
14. Shoulder Strap
CORDLESS POLE HEDGE TRIMMER
WARNING! WHEN HANDLING THE BLADE ASSEMBLY,
WEAR NON-SLIP, HEAVY-DUTY PROTECTIVE GLOVES. DO
NOT PLACE YOUR HAND OR FINGERS BETWEEN BLADES
OR IN ANY POSITION WHERE THEY COULD GET PINCHED
OR CUT. NEVER TOUCH BLADES OR SERVICE THE UNIT
WITH THE BATTERY INSTALLED.
BATTERY & CHARGER
This tool is compatible with all battery and
chargers from the Ozito PXC Range.
• Assembly without Extension Tube
1. Make sure the motor head and the rear handle are in the correct
orientation. Push the tube of the motor head into the tube of the rear
handle, aligning the Tab with the Recess as you do so. Push both
halves together until it will not go any futher.
RECESSTAB
Note: The two parts
can only be tted in
the correct orientation.
Do not force the parts
together.
2. To secure the two parts
together, slide the
lock nut to the hread
and screw tight. To
dismantle, proceed in
reverse order.
Note: The locking and unlocking directions
are indicated on the lock nut.
4
10
11 12
13
5
7
2. PREPARATION
WARNING! NEVER START THE POLE HEDGE TRIMMER
WHILE THE BLADE COVER IS FITTED.
• Assembly with Extension Tube
1. Push the tube of the motor head into the extension tube, aligning the
Tab with the Recess of the extension tube as you do so. Push both
halves together until it will not go any futher.
RECESSTAB
Note: The two parts
can only be tted in
the correct orientation.
Do not force the parts
together.
2. To secure the two parts
together, slide the lock
nut to the extension tube
thread and screw tight.
3. Make sure the motor head and the rear handle are in the correct
orientation. Push the tube of the rear handle onto the tube of the
extension tube, aligning the Tab with the Recess as you do so. Push
both halves together until it will not go any futher.
4. To secure the two parts together, screw tight with the lock nut.
WARNING! DO NOT OPERATE THE POLE HEDGE
TRIMMER WITH MORE THAN ONE EXTENSION TUBE
FITTED, THIS IS EXTREMELY DANGEROUS.
Adjusting the Rear Handle
Press and hold the two rear handle releases, one each side and turn the
handle 90 to the left or 90 to the right. Release to lock in position.
Pivoting the Trimmer Head
The head can be tilted to 7 different angles for ease of cutting in
different conditions.
1. Grip the motor housing of
the trimmer, press and hold
the pivoting head button.
WARNING! DO NOT HOLD THE BLADE IN AN ATTEMPT
TO ADJUST THE BLADE ANGLE. DOING SO MAY RESULT
IN POSSIBLE PERSONAL INJURY.
2. Tilt the head to any of
the 7 preset angles,
then release the
button to lock the
head in the selected
position.
The blade cover protects
the blade when not in
use. Simply slide it off
the blade before use.
Once nished operating,
place the cover back
over the blade.
Blade Cover
Especificaciones del producto
| Marca: | Ozito |
| Categoría: | cortasetos |
| Modelo: | PXPHTS-1845 |
¿Necesitas ayuda?
Si necesitas ayuda con Ozito PXPHTS-1845 haz una pregunta a continuación y otros usuarios te responderán
cortasetos Ozito Manuales
10 Octubre 2024
2 Octubre 2024
26 Septiembre 2024
14 Septiembre 2024
26 Agosto 2024
3 Agosto 2024
18 Julio 2024
cortasetos Manuales
- cortasetos Bosch
- cortasetos DeWalt
- cortasetos WOLF-Garten
- cortasetos Al-ko
- cortasetos Ferm
- cortasetos Gude
- cortasetos Makita
- cortasetos Hitachi
- cortasetos Black And Decker
- cortasetos Vonroc
- cortasetos Skil
- cortasetos Hyundai
- cortasetos Hanseatic
- cortasetos Ryobi
- cortasetos Florabest
- cortasetos Metabo
- cortasetos Worx
- cortasetos Meec Tools
- cortasetos Milwaukee
- cortasetos Hikoki
- cortasetos Sun Joe
- cortasetos Cramer
- cortasetos Sovereign
- cortasetos Einhell
- cortasetos Gardena
- cortasetos Baumr-AG
- cortasetos Husqvarna
- cortasetos Tanaka
- cortasetos Craftsman
- cortasetos Powerplus
- cortasetos Stiga
- cortasetos Cotech
- cortasetos Trotec
- cortasetos Topcraft
- cortasetos Texas
- cortasetos Spear & Jackson
- cortasetos Atika
- cortasetos Stihl
- cortasetos Dolmar
- cortasetos Powerworks
- cortasetos Zipper
- cortasetos Fieldmann
- cortasetos Varo
- cortasetos Pattfield
- cortasetos Fuxtec
- cortasetos Kibani
- cortasetos Grizzly
- cortasetos Cocraft
- cortasetos Maruyama
- cortasetos Batavia
- cortasetos Gardenline
- cortasetos Levita
- cortasetos Efco
- cortasetos Anova
- cortasetos EGO
- cortasetos Eurogarden
- cortasetos Garden Feelings
- cortasetos Jonsered
- cortasetos LawnMaster
- cortasetos Bestgreen
- cortasetos CMI
- cortasetos MacAllister
- cortasetos Maxbear
- cortasetos Yellow Garden Line
Últimos cortasetos Manuales
18 Octubre 2024
17 Octubre 2024
15 Octubre 2024
15 Octubre 2024
15 Octubre 2024
14 Octubre 2024
13 Octubre 2024
13 Octubre 2024
13 Octubre 2024
11 Octubre 2024