Ozito TSS-3100 Manual de Usario
Ozito
Lijadoras orbitales
TSS-3100
Lee a continuación 📖 el manual en español para Ozito TSS-3100 (6 páginas) en la categoría Lijadoras orbitales. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/6
THIRD
SHEET
SANDER
1/3 SHEET
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 150W
No Load Spead: 11,000 opm
Pad Size: 1/3 Sheet
(187x90mm)
Weight: 1.02kg
WHAT’S IN THE BOX
Third Sheet Sander
Sandpaper Sheet
Dust Bag
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
36 months from
the original date of purchase.
WARNING
The following actions will result in the warranty being void.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO
ozito.com.au
Paper Punch Plate
TSS-3100
0916
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
1. SANDING SHEET FITMENT
5. Dust Bag
6. Sanding Sheet
7. Paper Punch Plate
ACCESSORIES
1 Soft Grip
2 Sander Backing Pad
3 On/Off Switch
4 Spring Clamp
THIRD SHEET SANDER
SETUP & PREPARATION
1. Whenttingthesandingsheet,aligntheholesonthesheetwith
the holes on the sanding pad.
Ensure the tool is disconnected from the power supply before
performing any of the following operations.
The holes on the bottom of the sanding pad allow the dust bag to
draw the sanding dust away from the work area.
3. Fold the sandpaper to
match the contours of
the sanding pad.
2. Unlock the spring clamp
on both sides of the
sander.
5. Feed the paper under
the clamp at the rear
of the sander. Lock the
clamp.
4. Feed the paper under
the clamp at the front
of the sander. Lock the
clamp.
Note:Ensurethesandingsheetisrmlyclampedandheldat
against the base of the sanding pad.
3. DUST BAG
1/3
2. PAPER PUNCH PLATE
2. Align the sides of the backing pad with the raised sides of the
punch. Press down to punch the holes.
1. Fit the 1/3 sanding sheet to the sander.
Use the punch to create dust extraction holes on the sandpaper
which align with the holes on the sander.
2. Toremove,rotate
and pull the dust
bag away from the
extraction port.
1. Push the dust
bag onto the dust
extraction port
aligning the locking
tab and rotate.
Install
3. Empty dust bag when it becomes
1/3 full for optimum dust
extraction.
Remove
Empty
Especificaciones del producto
| Marca: | Ozito |
| Categoría: | Lijadoras orbitales |
| Modelo: | TSS-3100 |
¿Necesitas ayuda?
Si necesitas ayuda con Ozito TSS-3100 haz una pregunta a continuación y otros usuarios te responderán
Lijadoras orbitales Ozito Manuales
18 Octubre 2024
Lijadoras orbitales Manuales
- Lijadoras orbitales Skil
- Lijadoras orbitales Festool
- Lijadoras orbitales Meec Tools
- Lijadoras orbitales Maktec
Últimos Lijadoras orbitales Manuales
13 Octubre 2024
11 Octubre 2024
9 Octubre 2024
20 Julio 2024
18 Julio 2024